Sterileflat AMK KB600 Users manual

KB600 Wireless Keyboard

User Manual

Package List

Keyboard ------------------------------------------ 1pcs
Receiver -------------------------------------- ----- 1pcs
User Manual -------------------------------------- 1pcs

System Support

Windows10/8/7/win2000/XP/Visa/Linux/Android/IOS etc.

Before use:

1. Find the wireless keyboard and receiver in package

2. Plug receiver to USB port on PC, it will install the driver at around 10s;

3. Switch the button at the bottom of keyboard body, battery cover can be open. Open

the battery cover of the keyboard;

4. Install 2pcs AAA batteries (make sure its Positive and negative are correct), keyboard
will connect the receiver automatically;

5. Put on power switch at the bottom of keyboard, LED indicator will keep flash for few
seconds. Close the battery cover, the keyboard is ready to work.

Remark: Only AAA battery is available

Reconnection

Both of keyboard and receiver has a built-in code, It can be setting one keyboard to one
receiver, or few of keyboard to one receiver. Keyboard and receiver need to reconnect
under the condition of High temperature, high magnetic, strong vibrate.

1. Plug off the receiver from USB port, and plug it on

2. Move RF keyboard within 50CM to receiver, re-install the battery, Press any key to

Sterileflat AMK Ltd Tel No: 0044-01344 648599 www.sterileflat.com

Rainbow House 45 Madingley, Bracknell, Berkshire, RG12 7TF, UK

1

reconnect, the above operation must be completed in 15 seconds.

3. Keyboard will ready to work after reconnection.

4. Take off the battery if you don’t use the keyboard in a long time

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-- Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation

Sterileflat AMK Ltd Tel No: 0044-01344 648599 www.sterileflat.com

Rainbow House 45 Madingley, Bracknell, Berkshire, RG12 7TF, UK

2