FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
1
Customer: Standard
User Manual (Version 1.7)
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
2
This page is intentionally left blank.
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
3
1 Table of Contents
1 Table of Contents ................................................................................................................. 3
2 Introduction .......................................................................................................................... 5
2.1
Symbols used in this Manual ............................................................................................................... 5
2.2
Important Instructions .......................................................................................................................... 5
2.3
Note on the Warranty ........................................................................................................................... 5
3 General Safety Instructions ................................................................................................. 6
4 Electromagnetic Compatibility ............................................................................................ 7
4.1
Electromagnetic Compatibility EU ....................................................................................................... 7
4.2
Electrostatic Discharge (ESD) ............................................................................................................. 7
4.2.1 Grounding Methods ......................................................................................................................... 7
5 Technical Data / Environmental Specification ................................................................... 8
5.1
Technical Information ECO LINE ......................................................................................................... 9
5.2
Technical Information PRO LINE ....................................................................................................... 10
5.3
Order Information ............................................................................................................................... 11
5.4
CE Directives and Standards CE Directives ...................................................................................... 13
6 Scope of Delivery (options) ............................................................................................... 13
6.1
Type Label and Product Identification ............................................................................................... 14
7 Product Description ........................................................................................................... 15
7.1
Product view ...................................................................................................................................... 15
7.1.1 Front View Description ................................................................................................................... 15
7.1.2 Rear View Description – full metal-variant ..................................................................................... 15
7.1.3 Rear View Description – built-in-variant ........................................................................................ 16
8 Mechanical Specifications ................................................................................................. 17
8.1
Dimension Drawing ............................................................................................................................ 17
8.1.1 10.4“ built-in-variant ....................................................................................................................... 17
8.1.2 10.4“ full metal ............................................................................................................................... 17
8.1.3 12.1“ built-in-variant ....................................................................................................................... 18
8.1.4 12.1“ full metal ............................................................................................................................... 18
8.1.5 15.0“ built-in-variant ....................................................................................................................... 19
8.1.6 15.0“ full metal ............................................................................................................................... 19
8.1.7 15.6“ built-in-variant ....................................................................................................................... 20
8.1.8 15.6“ full metal ............................................................................................................................... 20
8.1.9 17.0“ built-in-variant ....................................................................................................................... 21
8.1.10 17.0“ full metal ............................................................................................................................... 21
8.1.11 18.5“ built-in-variant ....................................................................................................................... 22
8.1.12 18.5“ full metal ............................................................................................................................... 22
8.1.13 19.0“ built-in-variant ....................................................................................................................... 23
8.1.14 19.0“ full metal ............................................................................................................................... 23
8.1.15 21.5“ built-in-variant ....................................................................................................................... 24
8.1.16 21.5“ full metal ............................................................................................................................... 24
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
4
8.1.17
23.8“ built-in-variant ....................................................................................................................... 25
8.1.18 23.8“ full metal ............................................................................................................................... 25
9 Connectors ......................................................................................................................... 26
9.1
Panel PC BayTrail variant .................................................................................................................. 26
9.2
Panel PC Haswell variant .................................................................................................................. 26
9.3
Panel PC Apollo Lake variant ............................................................................................................ 26
9.4
Panel PC Skylake / Kaby Lake variant .............................................................................................. 26
9.5
PWR: Input Power Connector ........................................................................................................... 27
9.6
USB2.0 Type-A Connector ................................................................................................................ 27
9.7
USB3.0 Type-A Connector ................................................................................................................ 27
9.8
LAN: GbE RJ-45 Connector ............................................................................................................. 28
9.8.1 LED Diagram of LAN Connectors: ................................................................................................. 28
9.9
HDMI Connector ................................................................................................................................ 28
9.10 DP Connector .................................................................................................................................... 29
9.11 DB15 VGA Connector ........................................................................................................................ 29
9.12 Option: COM1 RS-232/422/485 (via internal cable connection to ECX-Board) ................................ 29
9.13 Option: COM2 RS-232/422/485 (via internal cable connection to ECX-Board) ................................ 29
10 Startup Procedure .............................................................................................................. 30
10.1 Drivers ................................................................................................................................................ 30
11 Warranty ............................................................................................................................. 30
12 Technical Support .............................................................................................................. 31
12.1 Returning Defective Merchandise ..................................................................................................... 31
13 Appendix............................................................................................................................. 33
13.1 Illustration Directory ........................................................................................................................... 33
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
5
2 Introduction
2.1 Symbols used in this Manual
This symbol point out to especially information.
2.2 Important Instructions
This chapter contains instructions which must be observed when using your Flatman Monitor.
The manufacturer’s instructions provide useful information on your device.
2.3 Note on the Warranty
Due to their limited service life, parts which by their nature are subject to a particularly high degree of wear
(wearing parts) are excluded from the warranty beyond that provided by law. This applies to the CMOS
battery, for example.
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
6
3 General Safety Instructions
The ext. supply shall meet the criteria for SELV (Safety Extra-low Voltage) and <240VA acc. UL 60950-1.
It must be assumed that safe operation is no longer possible, if the device has visible damage or if the device
no longer functions. In these cases the device must be shut down and secured against unintentional
operation.
Please read this section carefully and observe the instructions for your own safety and correct use of the
device. The chapter also contains information on approval and interference suppression of your device.
Observe the warnings and instructions on the device and in the manual.
In order to maintain this condition and ensure safe operation, the user must observe the instructions and
warnings contained in this manual.
• The device must be used in accordance with the instructions for use.
• The electrical installations in the room must correspond to the requirements of the local (country-
specific) regulations.
• Take care that there are no cables, particularly power cables, in areas where persons can trip over
them.
• Only use the power cord supplied. Don’t use injured or damaged power cords.
• For DC power connection:
The DC power source should be able to be switched off and on via an isolating switch.
The unit is only completely disconnected from the DC main power source, when the DC power cord is
disconnected either from the power source or the unit. Therefore, the DC power cord and its
connectors must always remain easily accessible.
• For AC power connection via external AC/DC adapter:
The main power cable of the external AC/DC adapter serves as disconnecting device. For this reason
the outlet of the AC power source must be located near to the device and be easily accessible.
• Do not place the device in direct sunlight, near heat sources or in a damp place. Make sure the device
has adequate ventilation.
• Only devices and components which fulfill the requirements of an SELV circuit (safety extra low
voltage) in accordance with EN60950 may be connected to the interfaces of the system.
• All plugs on the connection cables must be screwed or locked to the housing.
• The device generates heat during operation. Make sure it is adequately ventilated. Do not cover the
air intake and exhaust openings of the device.
• Repairs may only be carried out by qualified specialist personnel authorized by S&T.
• Maintenance or repair on the open device may only be carried out by qualified personnel authorized
by SNT which is aware of with the associated dangers.
• When accessing internal components the device must be switched off and disconnected from the
power source.
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
7
4 Electromagnetic Compatibility
4.1 Electromagnetic Compatibility EU
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. If the user modifies
and/or adds to the equipment (e.g. installation of add-on cards) the prerequisites for the CE conformity
declaration (safety requirements) may no longer apply.
4.2 Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can destroy static-sensitive devices or micro-circuitry. Therefore
proper packaging and grounding techniques are necessary precautions to prevent damage. Always take the
following precautions:
• Keep electrostatic sensitive parts in their containers until they arrive at the ESD-safe workplace.
• Always be properly grounded when touching a sensitive board, component, or assembly.
4.2.1 Grounding Methods
The following measures help to avoid electrostatic damages to the device:
• Cover workstations with approved antistatic material. Always wear a wrist strap connected to
workplace as well as properly grounded tools and equipment.
• Use antistatic mats, heel straps, or air ionizers for more protection.
• Always handle electrostatically sensitive components by their edge or by their casing.
• Avoid contact with pins, leads, or circuitry.
• Turn off power and input signals before inserting and removing connectors or connecting test
equipment.
• Keep work area free of non-conductive materials such as ordinary plastic assembly aids and
styrofoam.
• Use field service tools such as cutters, screwdrivers, and vacuum cleaners which are conductive.
• Always place drives and boards PCB-assembly-side down on the foam.
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
8
5 Technical Data / Environmental Specification
Display size
10.4“
12.1“
12.1“ XGA
15.0“
Display manufacturer Innolux Innolux Innolux Innolux
Display type G104AGE-L02 G121AGE-L03 G121X1-L03 G150XNE-L01 (new !!!)
Resolution 800x600 800x600 1024x768, XGA 1024x768
Format 4:3 4:3 4:3 4:3
Contrast ratio 700:1 1500:1 700:1 2500:1
Brightness 400cd 450cd 600cd 500cd
Angle View H160° / V140° H178° / V178° H160°/ V140° H176° / V176°
Colors 16.7 million 16.7 million 16.2 million 16.7 million
LED Lifetime (> 50%, 25°C) > 50.000h > 50.000h > 50.000h > 70.000h
Dimensions (WxHxD - mm) 297 x 244 x 65 338 x 277 x 65 338 x 277 x 65 396 x 312 x 69
Weight ~ 3,9kg ~ 4,7kg ~ 4,7kg ~ 6,4kg
Touch Options Protection glass / PCAP / resistive
Mounting Option full metal housing / built-in-mounting
Fastening VESA 75/75 or 100/100 (full metal housing only); fastening clips (built-in-variant only)
Color RAL 7021 (black anthracite)
Display size
15.6“
15.6“ Full HD
17.0“
18.5“
Display manufacturer
Innolux
AUO
AUO
Innolux
Display type
G156BGE-L01
G156HTN02.0
G170EG01V1
G185BGE-L01
Resolution 1366x768, HD
1920x1080, Full HD
1280x1024
1366x768, HD
Format 16:9
16:9
5:4
16:9
Contrast Ratio 500:1
500:1
800:1
1000:1
Brightness 300cd
400cd
350cd
300cd
Angle View H160° / V160°
H140° / V120°
H160° / V140°
H178° / V170°
Colors 16.7 million
16.2 million
16.7 million
16.7 million
LED Lifetime (> 50%, 25°C) > 50.000h
> 50.000h
> 50.000h
> 50.000h
Dimensions (WxHxD - mm) 432 x 281 x 74 432 x 281 x 74 427 x 360 74 500 x 321 x 74
Weight ~ 6,7kg
~ 6,7kg
~ 7,8kg
~ 8,6kg
Touch Options Protection glass / PCAP / resistive
Mounting Option full metal housing / built-in-mounting
Fastening VESA 75/75 or 100/100 (full metal housing only); fastening clips (built-in-variant only)
Color RAL 7021 (black anthracite)
Display size
18.5“
Full HD
19.0“
21.5“
23.8“
Display manufacturer
AUO AUO AUO
AUO
Display type
G185HAN01.0 G190ETN01.2 G215HVN01.0
G238HAN01.1 (new !!!)
Resolution 1920x1080
1280x1024 1920x1080, Full HD
1920x1080
Format 16:9
5:4 16:9
16:9
Contrast Ratio 1000:1
1000:1 3000:1
1000:1
Brightness 350cd/m2 350cd 300cd 400cd/m2
Angle View 178°/178°
H170° / V160° H178° / V178°
178°/178°
Colors 16,7million
16.7 million 16.7 million
16,7million
LED Lifetime (> 50%, 25°C) 50.000h
> 50.000h > 50.000h
50.000h
Dimensions (WxHxD - mm) 500 x 321 x 74
473 x 396 x 68 575 x 367 x 74
569 x 357 x 69
Weight ~ 8,6kg ~ 9,4kg ~ 10,7kg ~ 11,8 kg
Touch Options Protection glass / PCAP / resistive Protection glass / PCAP
Mounting Option full metal housing / built-in-mounting
Fastening VESA 75/75 or 100/100 (full metal housing only); fastening clips (built-in-variant only)
Color RAL 7021 (black anthracite)
• other Display manufacturers and types are possible
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
9
5.1 Technical Information ECO LINE
CPU Intel® BayTrail Celeron Quad Core J1900
Option: Intel® Braswell Celeron Quad Core
Memory 4GB DDR3 SO-DIMM
4GB DDR3 SO-DIMM
BIOS AMI uEFI BIOS
AMI uEFI BIOS
I/O Standard 2xGbE (1x Intel® I210, 1x Realtek RTL8111G),
1x HDMI, 1x VGA, 1x USB3.0, 2x USB2.0
2xGbE (2x Intel® I210), 1x HDMI, 1x DP, 4x USB3.0,
1x VGA, 2x USB2.0 (option)
Power Supply 12-30VDC Input
12-30VDC Input
Cooling
Fanless passive cooling
Fanless passive cooling
Operating Temperature
0°C - 50°C ambient (**)
0°C - 50°C ambient (**)
Operating Altitude
Up to 3000m (9900 ft)
Up to 3000m (9900 ft)
Storage Altitude
Up to 5000m (16500 ft)
Up to 5000m (16500 ft)
Humidity
10%-90% @ 39°C, non condensing
10%-90% @ 39°C, non condensing
OS Support Windows7 incl Embedded, Windows8.1 Pro,
Windows10 IoT, Linux Ubuntu
Windows7 incl Embedded, Windows8.1 Pro,
Windows10
IoT
, Linux
Ubuntu
Certification
CE, cULus, Design to meet FCC
CE
Protection class
Front: IP65, Housing IP20
Front: IP65, Housing IP20
EMC
EN55022 class B
EN55022 class B
Options
(Further options on request)
8GB RAM
CF/SD Card Adapter
SD Card Memory 4GB, 16GB, 32GB, 64GB
CF Card Memory on demand
mSATA SSD 32GB, 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
RFID, WiFi (on demand)
8GB RAM
CF/SD Card Adapter
SD Card Memory 4GB, 16GB, 32GB, 64GB
CF Card Memory on demand
mSATA SSD 32GB, 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
RFID, WiFi (on demand)
CPU Intel® Apollo Lake Pentium® N4200
Memory 4GB DDR3 SO-DIMM
BIOS AMI uEFI BIOS
I/O Standard 2xGbE (Intel® I210) 1x HDMI, 1x DP, 4x USB3.0
Power Supply 12-30VDC Input
Cooling Fanless passive cooling
Operating Temperature
0°C - 50°C ambient (**)
Operating Altitude
Up to 3000m (9900 ft)
Storage Altitude
Up to 5000m (16500 ft)
Humidity
10%-90% @ 39°C, non condensing
OS Support
Windows10 IoT, Linux Ubuntu
Certification
CE, cULus, Design to meet FCC
Protection class
Front: IP65, Housing IP20
EMC
EN55022 class B
Options
(Further options on request)
8GB RAM
CF/SD Card Adapter
SD Card Memory 4GB, 16GB, 32GB, 64GB
CF Card Memory on demand
M.2 SSD 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
RFID, WiFi (on demand)
FLATMAN ECO / PRO – User Manual
s&t embedded GmbH – Gutenbergstr. 2 – 85737 Ismaning - Germany
Phone: +49 89 370058 – 0 Fax: +49 89 37000 689
Mail to: info@snt-embedded.de
www.snt-embedded.de V1.7
10
5.2 Technical Information PRO LINE
CPU Intel® Haswell ULT i5-4300U
Option: Intel® Broadwell ULT i5-5350U
Memory 4GB DDR3 SO-DIMM
4GB DDR3 SO-DIMM
BIOS AMI uEFI BIOS
AMI uEFI BIOS
Hardware Monitor Temperature, Voltages
Temperature, Voltages
Watchdog
Programmable WDT to generate System reset
event
Programmable WDT to generate System reset event
RTC Processor integrated RTC
Processor integrated RTC
I/O Standard
3x GbE (2x Intel® I210, 1x Intel® I218-LM), 2x
Display Port, 4x USB3.0
3x GbE (2x Intel® I210, 1x Intel® I218-LM), 2x
Display Port, 4x USB3.0
Power Supply
12-30VDC Input via Phoenix Connector PSC
1,5/3-F
12-30VDC Input via Phoenix Connector PSC 1,5/3-F
Cooling Fanless passive cooling
Fanless passive cooling
Operating Temperature 0°C - 50°C ambient (UL listed 0°C - 45°C) (**)
0°C - 50°C ambient (UL listed 0°C - 45°C) (**)
Operating Altitude
Up to 3000m (9900 ft)
Up to 3000m (9900 ft)
Storage Altitude
Up to 5000m (16500 ft)
Up to 5000m (16500 ft)
Humidity 10%-90% @ 39°C, non condensing
10%-90% @ 39°C, non condensing
OS Support
Windows7 incl Embedded, Windows8.1 Pro,
Windows10 IoT, Linux Ubuntu
Windows7 incl Embedded, Windows8.1 incl
Embedded, Linux, Windows10
IoT
Certification CE, cULus, Design to meet FCC
CE
Protection class Front: IP65, Housing IP20
Front: IP65, Housing IP20
EMC EN55022 class B
EN55022 class B
Options
(Further options on request)
8GB RAM
CF/SD Card Adapter
SD Card Memory 4GB, 16GB, 32GB, 64GB
mSATA SSD 32GB, 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
CF Card Memory ,
RFID, WiFi (on demand)
8GB RAM
CF/SD Card Adapter
SD Card Memory 4GB, 16GB, 32GB, 64GB
mSATA SSD 32GB, 64GB, 128GB, 256Gb, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
CF Card Memory ,
RFID, WiFi (on demand)
(** except panel pc in size 23.8“: operating temperature 0-45°C ambient)
CPU Intel® Skylake ULT Core™ i5-6300U Intel® Kaby Lake ULT Core™ i5-7300U
Memory 4GB DDR4 SO-DIMM 4GB DDR4 SO-DIMM
BIOS AMI uEFI BIOS AMI uEFI BIOS
Hardware Monitor Temperature, Voltages Temperature, Voltages
Watchdog
Programmable WDT to generate System reset
event
Programmable WDT to generate System reset event
RTC Processor integrated RTC Processor integrated RTC
I/O Standard
3x GbE (2x Intel® I210, 1x Intel® I218-LM), 2x
Display Port, 4x USB3.0
3x GbE (2x Intel® I210, 1x Intel® I218-LM), 2x
Display Port, 4x USB3.0
Power Supply
12-30VDC Input via Phoenix Connector PSC
1,5/3-F
12-30VDC Input via Phoenix Connector PSC 1,5/3-F
Cooling Fanless passive cooling Fanless passive cooling
Operating Temperature 0°C - 50°C ambient (UL listed 0°C - 45°C) (**) 0°C - 50°C ambient (UL listed 0°C - 45°C) (**)
Operating Altitude
Up to 3000m (9900 ft) Up to 3000m (9900 ft)
Storage Altitude
Up to 5000m (16500 ft) Up to 5000m (16500 ft)
Humidity 10%-90% @ 39°C, non condensing 10%-90% @ 39°C, non condensing
OS Support
Windows7 incl Embedded,
Windows10 IoT, Linux Ubuntu
Windows10 IoT, Linux Ubuntu
Certification CE, cULus, Design to meet FCC CE, cULus, Design to meet FCC
Protection class Front: IP65, Housing IP20 Front: IP65, Housing IP20
EMC EN55022 class B EN55022 class B
Options
(Further options on request)
8GB or 16GB RAM
M.2 SSD 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
RFID, WiFi (on demand)
8GB or 16GB RAM
M.2 SSD 64GB, 128GB, 256GB, 512GB
2x COM (RS232, RS422, RS485)
Audio with amplifier (2x 3W)
RFID, WiFi (on demand)
Loading...