Page 1
S 220
ASSEMBLY INSTRUCTIONS, PLATFORM BED 60''
Assembly tools required : Hammer, Phillips screwdriver #2 and #3
Special Notes :
To make the assembly simple and well done, you have to be familiar with the parts.
Follow the step-by-step instructions on a clean area ( ex. carpet). Read the instructions
before starting the assembly.
ITEM QTY DESCRIPTION
1 2 Side rails
2 1 End rail
3 2 Left and right sides
4 1 Front panel
5 3 Top panels center
6 2 Top panels side
7 2 Cross-piece supports, long
8 3 Cross-piece supports, short
8 8
1
6
5
6
1
7
7
2
4
1 of 4
3
2X
From : Stellar Home Furniture
Manufactured by : CymeTech inc.
service@stellarhomefurniture.com
Page 2
S 220
Pre-assembly check list hardware pack
ITEM 9 : 40x ITEM 11 : 13xITEM 10 : 41x
M8 assembly screw
ITEM 12 : 4x
barbed dowel
5mm
Step 1
Sub-assembly
upright
Edgebands this end
3
4
12
4X
8
1/2'' thick
5/8'' thick
Screw #8 - 1"
ITEM 13 : 16x
Screw cap
8
Glide
2 glides on
this part
Screw holes on top
7
1/2'' thick
7
1/2'' thick
8
11
13X
Install glides on panels individually first
3
9 16X
Step 2
2 of 4
9
6
5
5
5
6
16X13
From : Stellar Home Furniture
Manufactured by : CymeTech inc.
service@stellarhomefurniture.com
24X
Page 3
Step 3
Tilt assembly on a block
for easier screwing
1
S 220
1
b) Align with end rail, parallel
to bed( 3/8'' gap), secure
a) Center and secure end rail first
2 mm
5/64'' gap
approx.
10
41X
2
Align pieces,
2 sides
No gap fit
2 mm
5/64'' gap
approx.
3 of 4
Bottom view
From : Stellar Home Furniture
Manufactured by : CymeTech inc.
service@stellarhomefurniture.com
Page 4
Warranty
This warranty does not cover the product if it has been placed outdoors or
es made at an authorized Cyme Tech
province prohibits this restriction, then it does not apply.
Garantie
The warranty from Cyme Tech covers defects in material and
workmanship for a period of 5 years from the date of purchase. The
original purchase receipt is required as proof of purchase. This warranty is
limited to the replacement of defective parts.
This warranty does not cover normal wear and tear, scratches, alterations
and intentional and non-intentional damages.
in a humid environment.
This warranty is only valid for purchas
dealer in Canada and in the United States.
This warranty defines the limits of Cyme Tech’s liability and entitles the
original buyer to specific rights. Any warranty defined by law in your state
or province is limited to a period of 5 years. If the law in your state or
From : Stellar Home Furniture
4 of 4
Manufactured by : CymeTech inc.
service@stellarhomefurniture.com
Loading...