Steinel XLED PRO slave, XLED PRO Wide slave, XLED PRO Wide XL slave, XLED PRO Square slave, XLED PRO Square XL slave User Manual

DGBS

RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL F GB D

STEINEL Vertrieb GmbH

D

Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: [phone]
Fax: [phone]
www.steinel.de

Steinel Austria GmbH

A

Hirschstettner Strasse 19/A/2/2
A-1220 Wien
Tel.: [phone]
Fax: [phone]
[e-mail]

PUAG AG

CH

Oberebenestrasse 51
CH-5620 Bremgarten
Tel.: [phone]
Fax: [phone]
[e-mail]

STEINEL U.K. LTD.

GB

25, Manasty Road · Axis Park
Orton Southgate
GB-Peterborough Cambs PE2 6UP
Tel.: [phone]
Fax: [phone]
[e-mail]

Socket Tool Company Ltd

IRL

Unit 714 Northwest Business Park
Kilshane Drive · Ballycoolin · Dublin 15
Tel.: [phone]
Fax: [phone]
[e-mail]

STEINEL FRANCE SAS

F

ACTICENTRE - CRT 2
Rue des Famards - Bât. M - Lot 3
F-59818 Lesquin Cedex
Tél.: [phone]
Fax: [phone]
[e-mail]

Van Spijk B.V.

NL

Postbus 2
5688 HP OIRSCHOT
De Scheper 402
5688 HP OIRSCHOT
Tel. [phone]
Fax. [phone]
[e-mail]
www.vanspijk.nl

VSA Belgium

B

Hagelberg 29
B-2440 Geel
Tel.: [phone]
Fax: [phone]
[e-mail]
www.vsabelgium.be

Minusines S.A.

L

8, rue de Hogenberg
L-1022 Luxembourg
Tél. : [phone]
Fax : [phone]
www.minusines.lu

SAET-94 S.L.

E

C/ Trepadella, n° 10
Pol. Ind. Castellbisbal Sud
E-08755 Castellbisbal (Barcelona)
Tel.: [phone]
Fax: [phone]
[e-mail]

STEINEL Italia S.r.l.

I

Largo Donegani 2
I-20121 Milano
Tel.: [phone]
Fax: [phone]
[e-mail]
www.steinel.it

Pronodis -

P

Soluções Tecnológicas, Lda.

Zona Industrial Vila Verde Sul,
Rua D, n.º 11
P-3770-305 Oliveira do Bairro
Tel.: [phone]
Fax: [phone]
[e-mail]
www.pronodis.pt

KARL H STRÖM AB

S

Verktygsvägen 4
S-55302 Jönköping
Tel.: [phone]
Fax: [phone]
www.khs.se

Roliba A/S

DK

Hvidkærvej 52
DK-5250 Odense SV
Tel.: [phone]
Fax: [phone]
www.roliba.dk

Oy Hedtec Ab

FI

Lauttasaarentie 50
FI-00200 Helsinki
Tel.: [phone]
Fax: [phone]
[e-mail]
www.hedtec.fi/valaistus

Vilan AS

N

Olaf Helsetsvei 8
N-0694 Oslo
Tel.: [phone]
[e-mail]
www.vilan.no

PANOS Lingonis + Sons O. E.

GR

Aristofanous 8 Str.
GR-10554 Athens
Tel.: [phone]
Fax: [phone]
[e-mail]

SAOS Teknoloji Elektrik Sanayi ve

TR

Ticaret Limited Şirketi

Halil Rıfat Paşa mahallesi
Yüzerhavuz Sokak
PERPA Ticaret Merkezi A Blok
Kat 5 No.313
Şişli / İSTANBUL
Tel.: [phone]
Fax: [phone]
[e-mail]
www.saosteknoloji.com.tr

ELNAS s.r.o.

CZ

Oblekovice 394
CZ-67181 Znojmo
Tel.: [phone]
Fax: [phone]
[e-mail] · www.elnas.cz

„LŁ“ Spółka z ograniczoną

PL

odpowiedzialnością sp.k.

Byków, ul. Wrocławska 43
PL-55-095 Mirków
Tel.: [phone]
Fax: [phone]
[e-mail]

DINOCOOP Kft

H

Radvány u. 24
H-1118 Budapest
Tel.: [phone]
Fax: [phone]
[e-mail]

KVARCAS

LT

Neries krantine 32
LT-48463, Kaunas
Tel.: [phone]
Fax: [phone]
[e-mail]

Fortronic AS

EST

Tööstuse tee 10,
EST-61715, Tõrvandi,
Ülenurme vald, Tartumaa
Tel.: [phone]
Fax: [phone]
[e-mail]
www.fortronic.ee

ELEKTRO – PROJEKT PLUS D.O.O.

SLO

Suha pri Predosljah 12
SLO-4000 Kranj
PE GRENC 2
4220 Škofja Loka
Tel.: [phone]
GSM: 00386-40-856555
[e-mail]
www.priporocam.si

NECO SK, A.S.

SK

Ružová ul. 111
SK-01901 Ilava
Tel.: [phone]
Fax: [phone]
[e-mail]
www.neco.sk

Steinel Distribution SRL

RO

Parc Industrial Metrom
RO-500269 Brasov
Str. Carpatilor nr. 60
Tel.: [phone]
Fax: [phone]
www.steinel.ro

Daljinsko upravljanje d.o.o.

HR

Bedricha Smetane 10
HR-10000 Zagreb
t/ 00385 1 388 66 77
f/ 00385 1 388 02 47
[e-mail]
www.daljinsko-upravljanje.hr

AMBERGS SIA

LV

Brivibas gatve 195-16
LV-1039 Riga
Tel.: [phone]
Fax: [phone]
www.ambergs.lv

ТАШЕВ-ГАЛВИНГ ООД

BG

Бул. Климент Охридски № 68
1756 София, България
Тел.: [phone]
Факс: [phone]
[e-mail]
www.tashev-galving.com

Best - Snab

RUS

ул.1812 года, дом 12
121127 Москва · Россия
Tel: [phone]
[e-mail]
www.steinel.su

STEINEL China

CN

Representative Office
Shanghai Rm. 25 A,
Huadu Mansion No. 838
Zhangyang Road Shanghai 200122
Tel: [phone]
Fax: [phone]
[e-mail]
[e-mail]
www.steinel.cn

XLED PRO Wide slave
XLED PRO Wide XL slave

XLED PRO Square slave
XLED PRO Square XL slave

110047651 06/2016_J Technische Änderungen vorbehalten. / Subject to technical modification without notice.

XLED PRO slave

Information

3

XLED PRO

Square Slave

XLED PRO

Wide Slave

XLED PRO

Wide Slave

4.2

4.3

4.4

4.5

4.6

4.1

...

D � � � � � � � � � � � 6
GB � � � � � � � � � � 9
S � � � � � � � � � � 12

Textteil beachten!
Follow written instructions!
Följ den skriftliga

montageinstruktionen�

– 2 –

– 3 –

5.1

5.2

5.3

5.4

5.5

5.6

4.3

4.4

4.5

4.6

5.1

5.2

4.7

4.9

4.10

5.3

5.4

4.8

– 4 –

– 5 –

!

!

9. Technische Daten

Sensor-LED-Strahler XLEDPROSquareXL Slave und XLEDPROSquare Slave

Netzanschluss 220-240 V / 50/60 Hz
Leistung XLEDPROSquare XL Slave / Wide XL Slave 48 W

Lichtfarbe 4000 K (neutralweiß) SDCM 3
Farbwiedergabeindex Ra > 80
Lichtstrom XLEDPROSquareXL Slave / Wide XL Slave 4400lm, 91,7lm/W

Grundlicht 10min, 30min (über RC9), ganze Nacht
Lebensdauer LED 50.000 h (L70B10 nach LM80)
Schwenkbereich LED-Panel 0-90° vertikal

Projizierte Fläche XLEDPROSquare Slave 362 cm

Schutzart IP 54
Schutzklasse I / IK03
Temperaturbereich - 20 °C bis + 40 °C

XLEDPROWideXL Slave und XLEDPROWide Slave

XLEDPROSquare Slave / Wide Slave 24,8 W

XLEDPROSquare Slave / Wide Slave 2400lm, 96,8lm/W

360° horizontal

2

XLEDPROWide Slave 403 cm

2

10. Betriebsstörungen

Störung Ursache Abhilfe

LED-Strahler ohne Spannung

LED-Strahler schaltet nicht ein

n Sicherung defekt, nicht einge-

schaltet, Leitung unterbrochen

n Kurzschluss
n bei Tagesbetrieb, Dämme-

rungseinstellung steht auf
Nachtbetrieb

n Netzschalter AUS
n Sicherung defekt

n Erfassungsbereich nicht

gezielt eingestellt

n neue Sicherung, Netzschalter

einschalten; Leitung mit Span­nungsprüfer überprüfen

n Anschlüsse überprüfen
n neu einstellen

n Einschalten
n neue Sicherung, evtl. Anschluss

überprüfen

n neu justieren

GB

1� About this document

Please read carefully and keep in a safe place�

– Under copyright. Reproduction either in whole or

in part only with our consent.

– Subject to change in the interest of technical

progress.

Symbols

Hazard warning!

Reference to other information in the

...

document�

2� General safety precautions

Disconnect the power supply before
attempting any work on the unit�

• Installing these units involves work on the mains
supply voltage; installation must therefore be car­ried out professionally in accordance with the ap­plicable national wiring regulations and electrical
operating conditions (D-VDE 0100, a -ÖVE/
ÖNORM E 8001-1, h-SEV 1000)

• The floodlight enclosure heats up when the light
is on. Only adjust the angle of the LED head
once it has cooled down.

• The light must be positioned so that it is not
expected that anybody can stare into the light
for any prolonged period from a distance of less
than 0.3 m.

3� XLEDPROSquare / Wide Slave

Proper use

– Sensor-switched floodlight with LEDs as light

source.

– Suitable for wall mounting outdoors.
– Data line (D-line, optional) for synchronous

switching.

Basic light level function

As an option, main and basic light can be switched
ON and OFF in synchrony by means of an ad­ditional data line (D-line) between the XLED PRO
sensor-switched LED floodlight and XLED PRO
slave LED floodlight (master-slave).

Basic brightness by means of basic light LEDs
provides a low level of illumination. The main light
is only switched on for the time selected when
movement occurs in the detection zone (master).
The floodlight then switches to the level of basic
brightness selected at the master.

Models

– XLED PRO Square XL Slave
– XLED PRO Square Slave
– XLED PRO Wide XL Slave
– XLED PRO Wide Slave

Package contents

XLEDPROSquare Slave (Fig� 3�1)
XLEDPROWide Slave (Fig� 3�3)

Product dimensions

XLEDPROSquare Slave (Fig� 3�2)
XLEDPROWide Slave (Fig� 3�4)

Unit components (Fig� 3�5)
A Floodlight head
B Basic light level LED
C Enclosure
D Wall mount
E Plug connection

4� Electrical installation

Connect the mains power supply lead (Fig� 4�7)

The mains power supply lead is a 3-core cable:
L = phase conductor (usually black,

brown or grey)

N = neutral conductor (usually blue)
PE = protective-earth conductor (green/yellow)
D = D-line (data line) optional

If you are in any doubt, identify the conductors
using a voltage tester; then disconnect from the
power supply again. Connect phase (L) and neutral
conductor (N) to the terminal block.

Wiring diagram (Fig� 4�8)

Note:

A power switch for switching the light ON and OFF
can be installed in the mains supply lead. This is a
prerequisite for the manual override function.

Important:

Incorrectly wired connections will produce a short
circuit later on in the product or your fuse box. In
this case, you must identify the individual conduc­tors once again and reconnect them.

GB

– 8 –

– 9 –

The light source of this luminaire cannot be
replaced. If the light source needs to be replaced
(e.g. at the end of its service life), the complete
luminaire must be replaced.

5� Mounting

• Check all components for damage.

• Do not use the product if it is damaged.

• Positioning the wall mount (Fig� 4�1)

Mounting procedure

• Switch OFF power supply (Fig� 4�2)

• Undo retaining screws (Fig� 4�3)

• Detach enclosure from wall mount (Fig� 4�3)

• Mark drill holes (Fig� 4�4)

• Drill holes and fit wall plugs
– Concealed installation (Abb� 4�5)
– Surface-mounted installation (Fig� 4�6)

• Connect conductors (Fig� 4�7)

• Fit enclosure (C) onto wall mount (D). Ensure

correct plug connection (E) (Fig� 4�9)

• Screw in retaining screws (Fig� 4�9)

• Switch ON power supply (Fig� 4�10)

6� Information

– Floodlight head adjustment range (5�1 / 5�2)
– Reference to light-distribution curves

(Fig� 5�3 - 5�6)

7� EC Declaration of Conformity

This product complies with the requirements
defined in the following standards, legislation and
directives:

– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EU
– WEEE 2012/19/EU

8� Warranty

All rights are based on our warranty period. We
guarantee that your STEINEL Professional sensor
product will remain in perfect condition and proper
working order for a period of 5 years. We guaran­tee that this product is free from material, manufac­turing and design flaws. In addition, we guarantee
that all electronic components and cables function
in the proper manner and that all materials used
and their surfaces are without defects.

Making Claims

If you wish to make a claim, please send your
product complete and carriage paid with the origi­nal receipt of purchase, which must show the date
of purchase and product designation, either to your
retailer or contact us at STEINEL (UK) Limited,

25 Manasty Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP, for a returns number.

For this reason, we recommend that you keep
your receipt of purchase in a safe place until the
warranty period expires. STEINEL shall assume
no liability for the costs or risks involved in returning
a product.

For information on making claims under
the terms of the warranty, please go to

www�steinel-professional�de/garantie

9. Technical specifications

Sensor-switched LED floodlights XLEDPROSquareXL Slave and XLEDPROSquare Slave

Mains power supply 220-240 V / 50/60 Hz
Output XLEDPROSquare XL Slave / Wide XL Slave 48 W

Colour temperature 4000 K (neutral white) SDCM 3
Colour rendering index Ra > 80
Luminous flux XLEDPROSquareXL Slave / Wide XL Slave 4400lm, 91.7lm/W

Basic light 10min, 30min (via RC9), all night
LED life expectancy 50,000 h (L70B10 to LM80)
LED panel adjustment range 0-90° tilting

Area illuminated XLEDPROSquare Slave 362 cm

IP rating IP 54
Protection class I / IK03
Temperature range -20°C to +40°C

XLEDPROWideXL Slave and XLEDPROWide Slave

XLEDPROSquare Slave / Wide Slave 24.8 W

XLEDPROSquare Slave / Wide Slave 2400lm, 96.8lm/W

360° swivelling

2

XLEDPROWide Slave 403 cm

2

10. Troubleshooting

Malfunction Cause Remedy

Sensor-switched LED floodlight
without power

Sensor-switched LED floodlight
will not switch ON

n Fuse faulty, not switched ON,

break in wiring

n Short circuit
n Twilight setting in night mode

during daytime operation

n Mains power switch OFF
n Fuse faulty

n Detection zone not properly

targeted

n Replace fuse, turn ON mains

switch, check lead with volt­age tester

n Check connections
n Adjust setting

n Switch ON
n Fit new fuse, check connection

if necessary

n Readjust

GB

– 10 –

– 11 –