Steinel XLED FL-50, XLED FL-100 User Manual

XLED FL-50/XLED FL-100

Information

Датчики, светильники

Представитель в России
Сенсорные технологии
Телефон:[phone]
www.steinel-rus.ru

RUS

SAET-94 S.L.

C/ Trepadella, n° 10
Pol. Ind. Castellbisbal Sud
E-08755 Castellbisbal (Barcelona)
Tel.: + 34/93/772 28 49
Fax: [phone]
[e-mail]

Pronodis - Soluções Tecnológicas, Lda.

Zona Industrial Vila Verde Sul, Rua D, n.º 11
P-3770-305 Oliveira do Bairro
Tel.: [phone]
Fax: [phone]
[e-mail] · www.pronodis.pt

Roliba A/S

Hvidkærvej 52
DK-5250 Odense SV
Tel.: [phone]
Fax: [phone]
www.roliba.dk

Oy Hedtec Ab

Lauttasaarentie 50
FI-00200 Helsinki
Tel.: [phone]
Fax: [phone]
www.hedtec.fi/valaistus · [e-mail]

Vilan AS

Tvetenveien 30 B
N-0666 Oslo
Tel.: [phone]
Fax: [phone]
[e-mail]

ELNAS s.r.o.

Oblekovice 394
CZ-671 81 Znojmo
Tel.: [phone]
Fax: [phone]
[e-mail] · www.elnas.cz

CZ

E

P

S

DK

FI

N

PANOS Lingonis + Sons O. E.

Aristofanous 8 Str.
GR-10554 Athens
Tel.: + 30/210/321 20 21
Fax: [phone]
[e-mail]

GR

EGE SENSORLU AYDİNLATMA İTH. İHR.
TİC. VE PAZ. Ltd. STİ.

Gersan Sanayi Sitesi 2305 · Sokak No. 510
TR-06370 Bati Sitesi (Ankara)
Tel.: [phone]
Fax: [phone]
[e-mail]
ww.egeithalat.com.tr

TR

ATERSAN İTHALAT MAK. İNŞ. TEKNIK
MLZ. SAN. ve TİC. A.Ş.

Tersane Cad. No: 63
34420 Karaköy / İstanbul
Tel. [phone] Pbx.
Fax. [phone]
[e-mail] · www.atersan.com

KARL H STRÖM AB

Verktygsvägen 4
S-553 02 Jönköping
Tel.: [phone]
Fax: [phone]
www.khs.se

"LŁ" Spółka z ograniczoną
odpowiedzialnością sp.k.

Byków, ul. Wrocławska 43
PL-55-095 Mirków
Tel.: [phone]
Fax: [phone]
[e-mail]

PL

STEINEL-Schnell-Service

Dieselstraße 80-84
33442 Herzebrock-Clarholz
Tel: [phone]
Fax: [phone]
www.steinel.de

Steinel Austria GmbH

Hirschstettner Strasse 19/A/2/2
A-1220 Wien
Tel.: [phone]
Fax: [phone]
[e-mail]

PUAG AG

Oberebenestrasse 51
CH-5620 Bremgarten
Tel.: + 41/56/648 8888
Fax: [phone]
[e-mail]

STEINEL U. K. LTD.

25, Manasty Road · Axis Park
Orton Southgate
GB-Peterborough Cambs PE2 6UP
Tel.: [phone]
Fax: [phone]
[e-mail]

Socket Tool Company Ltd

Unit 714 Northwest Business Park
Kilshane Drive · Ballycoolin · Dublin 15
Tel.: [phone]
Fax: [phone]
[e-mail]

STEINEL FRANCE SAS

ACTICENTRE - CRT 2
Rue des Famards - Bât. M - Lot 3
F-59818 Lesquin Cedex
Tél.: [phone]
Fax: [phone]
[e-mail]

VAN SPIJK AGENTUREN

Postbus 2
5688 HP OIRSCHOT
De Scheper 260
5688 HP OIRSCHOT
Tel. [phone]
Fax. [phone]
[e-mail]
www.vanspijk.nl

VSA handel Bvba

Hagelberg 29
B-2440 Geel
Tel.: [phone]
Fax: [phone]
[e-mail]
www.vsahandel.be

Minusines S.A.

8, rue de Hogenberg
L-1022 Luxembourg
Tél. : [phone]
Fax : [phone]
www.minusines.lu

D

A

CH

GB

IRL

F

NL

B

L

STEINEL Italia S.r.l.

Largo Donegani 2
I-20121 Milano
Tel.: [phone]
Fax: [phone]
[e-mail]
www.steinel.it

I

Daljinsko upravljanje d.o.o.

Bedricha Smetane 10
HR-10000 Zagreb
t/ 00385 1 388 66 77
f/ 00385 1 388 02 47
[e-mail]
www.daljinsko-upravljanje.hr

HR

FORTRONIC AS

Teguri 45c
EST 51013 Tartu
Tel.: [phone]
Fax: [phone]
[e-mail]

NECO SK, A.S.

Ružová ul. 111
SK-01901 Ilava
Tel.: [phone]
Fax: [phone]
[e-mail] · www.neco.sk

Steinel Distribution SRL

Parc Industrial Metrom
RO - 500269 Brasov
Str. Carpatilor nr. 60
Tel.: [phone]
Fax: [phone]
www.steinel.ro

Log-line d.o.o.

Suha pri predosljah 12
SLO-4000 Kranj
Tel.: [phone]
Fax: [phone]
[e-mail] · www.log.si

EST

SLO

SK

RO

AMBERGS SIA

Brivibas gatve 195-16
LV-1039 Riga
Tel.: [phone]
Fax: [phone]
www.ambergs.lv

LV

STEINEL China

Representative Office
Shanghai Rm. 21 A-C,
Huadu Mansion No. 838
Zhangyang Road Shanghai 200122
Tel: [phone]
Fax: [phone]
www.steinel.cn
[e-mail]

CN

ТАШЕВ-ГАЛВИНГ ООД

Бул. Климент Охридски № 68
1756 София, България
Тел.: [phone]
Факс: [phone]
[e-mail]
www.tashev-galving.com

BG

DINOCOOP Kft

Radvány u. 24
H-1118 Budapest
Tel.: [phone]
Fax: [phone]
[e-mail]

H

KVARCAS

Neries krantine 32
LT-48463, Kaunas
Tel.: [phone]
Fax: [phone]
[e-mail]

LT

D

GBF

NL

I

E

P

SDKFI

N

GR

TR

H

CZ

SKPLROM

SLO

HR

EST

LTLVRUSBG

中

110031471 08/2013_E Technische Änderungen vorbehalten.

- 2 - - 3 -

XLed FL-50 / XLed FL-100

Master

2

34

1

3,0

3,0

2,5

2,5

XLed FL-50 / XLed FL-100

L

N

L

N

L N L« L N L«

2,5

3,0





I

II



















 









4,0

- 5 -- 4 -

XLed FL-50 / XLed FL-100









- 5 -

XLed FL-50 / XLed FL-100

















max. 16 XLed FL

- 11 -- 10 -

Installation Instructions

Dear Customer,

Congratulations on purchasing your new STEINEL
LED floodlight projector and thank you for the
confidence you have shown in us. You have chosen
a high-quality product that has been manufactured,
tested and packed with the greatest care.

GB

Safety Warnings

■ Disconnect the power supply before attempting
any work on the light.

■ During installation, the electrical wiring being con­nected must be dead. Therefore, switch off the
power first and use a voltage tester to make sure
the wiring is off circuit.

■ Installation of these light involves work on the
mains power supply; this means it must be carried
out professionally in accordance with national
wiring regulations and electrical operating
conditions (

D

-VDE 0100, A-ÖVE/ÖNORM

E 8001-1,



-SEV 1000)

Please familiarise yourself with these instructions
before attempting to install the light because pro­longed, reliable and trouble-free operation will only
be ensured if it is fitted and used properly.

We hope your new STEINEL LED floodlight projector
will bring you lasting pleasure.

■ Do not install the light on normally flammable
surfaces.

■ Suitable for indoor and outdoor use.

■ The sensor-switched LED floodlight is only

intended for wall mounting and not for ceiling
mounting.

■ The housing gets warm while the floodlight is
switched ON. Only adjust the angle of the LED
head once it has cooled down.

■ Do not look into the LED light at short

range or for any prolonged period
(> 5 min.). You could damage your retina.

Principle

The LED floodlight projector's photoelectric sensor
system brings new radiance to outdoor advertising.
This sensor system measures ambient brightness and
automatically switches the light ON at dusk and, with
a variety of switching options, automatically OFF
again at dawn.

System Components

 Wall mount with power supply unit
 Sealing plug
 LDR sensor
 LED floodlight head
 Heat sink
 Lamp arm with cover
 Lamp arm adjuster
 Note: Master/slave
 Floodlight head swivel range

 Programme selector

1 Slave mode
2 Twilight mode
3 Night economy mode

 Twilight setting
 Even illumination of surfaces lit
 Drainage hole

Mains connection, concealed wiring
Mains connection, surface wiring

I

II

Installation

The mains supply lead is a 3-core cable.

L = phase conductor (usually black, brown or grey)
N = neutral conductor (usually blue)
PE = protective-earth conductor (green/yellow)

Functions

Twilight setting
(response threshold) 

(Factory setting:
daylight operation 100 lux)

Programmes  (Factory setting: programme 2)

Important: Getting the cable connections crossed

will produce a short circuit in the light or in your fuse
box. In this case, you must identify the individual
cables and re-connect them. An appropriate mains
switch for switching the light ON and OFF can be
installed in the mains lead.

1 Slave mode:

The floodlight is switched ON by another flood­light in P2 or P3. It can also be switched ON and
OFF manually or by timer.

2 Twilight mode:

Light ON as from light-level setting selected.

3 Night economy mode:

Light ON as from light-level setting selected and
OFF for 3 hours one hour after midnight. Then
ON until the light-level setting selected.

2 – 100 lux

Note: Master/slave

To avoid disturbing influences at the LDR sensor
(e.g. from wire-connected floodlights (slave), we
recommend installing the master floodlight outermost
in all cases.

This way, the light measured at LDR sensor is a true
reading.



The sensor's response threshold can be infinitely
varied from 2 – 100 lux.

Control dial set to =
daylight operation (approx. 100 lux)

Control dial set to =
night-time operation approx. 2 lux.

GB

Note on night economy function:

The night economy mode always ends in the early
hours of the morning between approx. 4 and 5 a.m.
After then, the light switches ON again automatically
when it's dark if the morning hours option is set to
ON. The sensor contains no integrated clock, the
middle of the night is only determined by the length of
the dark phases. To work perfectly, this means it is
important for the floodlight to be permanently connec­ted to the power supply during this period. The flood-

light is switched ON all the time during the first night
(calibration phase). Values remain saved even in the
event of mains power failure. We do not recommend
interrupting the power supply in the programme. The
values are determined over several nights which
means that in the event of any fault occurring the
floodlight should be observed over several nights
to see whether the switch-OFF time moves towards
midnight.

approx.

2h

approx. 3h

OFF

approx.

2h

OFF

OFF

- 13 -- 12 -

Technical Specifications

Sensor-switched
LED floodlight XLed FL-50 XLed FL-100

Dimensions (h x w x d): 182 x 175 x 541 mm 182 x 175 x 1041 mm
Output: 9 LEDs, approx. 25 W 9 LEDs, approx. 25 W
Power supply: 230-240 V/50 Hz 230-240 V/50 Hz
Light colour approx. 3500 Kelvin (warm white) approx. 3500 Kelvin (warm white)
Luminous flux: 820 lumens (approx. 42 lm/W) 820 lumens (approx. 42 lm/W)
Colour rendering index: RA ≥ 90% RA ≥ 90%
Max. additional

switching capacity: 16 floodlight projectors

Incandescent lamps, 800 W max. at 230 V AC
Fluorescent lamp, 400 W max., at cos ϕ = 0.5,

inductive load at 230 V AC
Fluorescent lamps, low-energy bulbs,

LED lights with electronic ballast operating on 230 V AC,

max. of 4 x 60 W each, C ≤ 88 μF
LED life expectancy: up to 50,000 hours up to 50,000 hours.
Area light is projected on: 285 m

2

385 m

2

Floodlight adjustment range: 180° (tilting) 180° (tilting)

120° (turning) 120° (turning)
Twilight setting: 2 – 100 lux 2 – 100 lux
Weight: 2.2 kg 2.5 kg
Temperature range: -20 °C to +50 °C -20 °C to +50 °C
IP rating: IP 44 IP 44
Protection class I I

Functional Warranty

This STEINEL product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
STEINEL guarantees that it is in perfect condition and
proper working order.
The warranty period is 3 years and starts on the date
of sale to the consumer. We will remedy defects
caused by material flaws or manufacturing faults.
The warranty will be met by repair or replacement of
defective parts at our own discretion. The warranty
shall not cover damage to wear parts, damage or
defects caused by improper treatment or mainten­ance. Further consequential damage to other objects
shall be excluded.

Claims under the warranty will only be accepted if the
light is sent fully assembled and well-packed with a
brief description of the fault, a receipt or invoice (date
of purchase and dealer's stamp) to the appropriate
Service Centre.

Repair service:

If defects occur outside the warranty
period or are not covered by warran­ty, ask your nearest service station
for the possibility of repair.

Declaration of Conformity

This product complies with

- Low-Voltage Directive 2006/95/EC

- EMC Directive 2004/108/EC

- RoHS Directive 2011/65/EC

- WEEE Directive 2012/19/EC

Troubleshooting

Sensor-switched LED floodlight
without power

Sensor-switched LED floodlight
will not switch ON

Sensor-switched LED floodlight
will not switch OFF

Malfunction

■ Fuse has blown; not switched
ON; break in wiring

■ Short circuit

■ New fuse, turn on power switch,

check wiring with voltage tester

■ Check connections

■ Check connection

■ Twilight setting in night-time

mode during daytime operation

■ Mains power switch OFF

■ Fuse faulty

■ Timer not switching ON/OFF or

manual override not functioning

■ Adjust setting

■ Switch ON

■ Replace fuse, check connection

if necessary

■ Check timer/manual override

■ LDR sensor covered/dirty ■ Check/clean

Cause Remedy

GB