Stego SL 025 Data Sheet

Technical Data

Lighting

||

SL025/06-08/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

SL 025 Slimline Light

Compact design

Electronic ballast

Optional integrated receptacle

Screw or magnet mount

Long-life energy saving lamp

On/off switch or motion sensor

The SL 025 light was designed to fit in tight spaces in enclosures. It features an optional inte­grated receptacle so that electrical devices (e.g. power tools) can be easily plugged in when
needed. The standard light can be screw mounted in a variety of positions, or the light can be
fitted with an available magnet mount. The motion sensor version was designed to eliminate
the need for a door switch.

Power consumption 11W (~ 75W incandescent bulb)

Luminosity 900Lm

Lamp type compact fluorescent, 2G7 base, electronic ballast

Service life 10,000 hrs.

Switch (for light only) on/off switch or PIR motion sensor

1)

Connection 3-pole terminal AWG 16 max. (1.5mm²) with strain relief only

(cable not included), clamping torque 0.8Nm max.

Housing plastic, UL 94V-0, light grey

Mounting M5 screws (not included), 11.8” (300mm) hole distance or

optional attached magnet (see part nos. below)

Operating temperature -4 to +122°F (-20 to +50°C)

Storage temperature -49 to +158°F (-45 to +70°C)

Dimensions 13.6 x 3.6 x 1.6” (345 x 91 x 40mm)

Weight approx. 0.9 lbs. (400g), 1.3 lbs (600g) with magnet

Protection type IP20

Note 24VDC to 48VDC available upon request

Part No. with

On/Off Switch

Part No. with

Motion Sensor

Model Operating Voltage Receptacle

Rec. max.

current

Protection class Approvals

02520.0-00 02520.0-03 without magnet

230VAC, 50/60Hz Germany/Russia

16.0A I (grounded) VDE

02520.1-00 02520.1-03 with magnet 230VAC, 50/60Hz Germany/Russia 16.0A I (grounded) VDE

02521.0-00 02521.0-03 without magnet

230VAC, 50/60Hz

France/Poland 16.0A I (grounded) VDE

02521.1-00 02521.1-03 with magnet 230VAC, 50/60Hz France/Poland 16.0A I (grounded) VDE

02522.0-00 02522.0-03 without magnet

230VAC, 50/60Hz Switzerland

10.0A I (grounded) VDE

02522.1-00 02522.1-03 with magnet

230VAC, 50/60Hz Switzerland

10.0A I (grounded) VDE

02523.0-00 02523.0-03 without magnet 230VAC, 50/60Hz UK/Ireland 13.0A I (grounded) VDE

02523.1-00 02523.1-03 with magnet

230VAC, 50/60Hz UK/Ireland

13.0A I (grounded) VDE

02524.0-01 02524.0-04 without magnet

120VAC, 50/60Hz USA/Canada

15.0A I (grounded) UL File No. E234324

02524.1-01 02524.1-04 with magnet 120VAC, 50/60Hz USA/Canada 15.0A I (grounded) UL File No. E234324

02527.0-00 02527.0-04 without magnet

230VAC, 50/60Hz none

- II (double insulated) UL File No. E234324, VDE

02527.1-00 02527.1-04 with magnet

230VAC, 50/60Hz none

- II (double insulated) UL File No. E234324, VDE

02527.0-10 02527.0-12 without magnet

120VAC, 50/60Hz none

- II (double insulated) UL File No. E234324

02527.1-10 02527.1-12 with magnet 120VAC, 50/60Hz none - II (double insulated) UL File No. E234324

Magnet (optional)

13.6” (345 mm)

3.6” (91mm)

1.6” (40mm)

11.8” (300 mm)

0.5” (12.5 mm)

0.8” (20 mm)

1)

The Passive Infrared (PIR) motion sensor detects the motion of the enclosure door being opened and automat­ically turns on the light. The sensor is factory pre-set to turn the light off 6 minutes after all motion ceases. The
motion sensor does not detect movement through glass, allowing for installation in enclosures with glass doors.