Stego REx 011 Data Sheet
1.18" (30mm)
0.2" (5.4mm)
39.4" (1000mm)
HAZARDOUS AREA THERMOSTAT
20.04.2017 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
REx 011 |
1.77" (45mm)
0.2" (5,4mm)
1" (25mm)
59 °F / 15 °C, 77 °F / 25 °C (T6)
Compact, small mechanical thermostat offering a high response accuracy, small switching difference, and a very
long service life (switching cycles). This thermostat of temperature class T6 (185 °F / 85 °C max.) is utilized for the
regulation of heaters deployed in hazardous areas. The high switching performance allows direct control of a heater.
TECHNICAL DATA
3.74" (95mm)
1
> For use in hazardous areas
> High switching capacity
> Compact Design
Temperature class T6
Ex Protection type
Gases
Dusts
Ambient temperature
Sensor element
Service life > 100 000 cycles
Max. switching capacity AC 250 V 10 A
Min. switching capacity DC 1.5 V 5 mA
Max. inrush current AC 16 A for 12 sec.
Connection silicone cable (halogen-free) 3 x AWG 18 (1.0 mm²),
Connection PE AWG 18 to 14 (1.0 to 2.5 mm²)
Mounting clip for 35 mm DIN rail, EN 60715
Housing aluminum, silver anodized
Dimensions 3.7 x 1.8 x 1.9" (95 x 45 x 30 mm)
Weight approx. 0.66 lbs (0.3 kg)
Mounting position variable
Storage temperature -76 to +185 °F (-60 to +85 °C)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP66 / I (grounded)
Approvals EPS 16 ATEX 1 118 X
II 2 GD
> “Pre-set” temperature
> Ready-to-use with strain relief
> Temperature class T6
Ex db IIC T6 Gb
Ex tb IIIC T85 °C Db IP66
-76 to +185 °F (-60 to +85 °C)
thermostatic bimetal
1
length 3 ft (1 m)
screw mounting M5, optional sideways mounting
IECEx EPS 16.0054X
EAC
currents above 4 A affect the switching difference
Part No. Contact type (1-pole) Switch temperature Switching difference (Hysteresis)
01185.0-00 Normally Closed (NC) 59 °F / 15 °C (± 5 °F /3 K tolerance) 9 °F ± 5 °F tolerance (5 K ± 3 K)
01185.1-00 Normally Closed (NC) 77 °F / 25 °C (± 5 °F /3 K tolerance) 9 °F ± 5 °F tolerance (5 K ± 3 K)
Loading...