Stego LED 025 Catalog Page
ECOLINE LIGHT
18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
LED 025
LIGHTING
93
93
LED 025 Light
with clip mount
with motion sensor
and screw mount
On/off switch light
w/magnet or screw
mount
LED 025 Light
On/off switch light
w/clip mount
LED 025 Light
with on/off switch
and magnet mount
Ecoline Light
LED 025
top view
> Energy saving LED technology
> Wide voltage range
> Integrated power unit
> Magnet, screw or clip mount
> Wide variety of connections
> Dual cage clamp for quick wiring
The LED 025 light series is suitable for all types of panels and enclosures, especially where space is at a premium.
These lights have a very long service life due to the use of LED technology. They are available with powerful non-slip
rubberized magnets allowing them to be easily positioned in any steel enclosure. Screw and clip mounting are
also available as options. The Ecoline series is a simplified version of the standard LED 025 light and has a dual
cage clamp for connection instead of connectors. Nonetheless it is suitable for daisy-chaining and allows for up
to 10 lights to be connected to each other.
TECHNICAL DATA
Power consumption max. 5 W (~ 75 W incandescent bulb)
Luminous flux 400 Lm at 120°
Lamp type LED, 120° angle of radiation
Service life 60,000 hrs. at 68°F (20°C)
Connection 2-pole dual cage clamp for solid wire AWG 14 (2.5 mm
Housing plastic, transparent
Mounting magnet, M5 screws (not included), or clip (M6 screws),
Operating / Storage temperature
Operating / Storage humidity max. 90 % RH (non-condensing)
Dimensions see drawings
Weight approx. 7 oz. (200 g)
Protection type / Protection class IP20 / II (double insulated)
light color – daylight, color temperature – 6,000 to 7,000 K
2
and stranded wire (wire end ferrule) AWG 16 (1.5 mm2)
torque 2 Nm max.
-22 to +140 °F (-30 to +60 °C ) / -40 to +185 °F (-40 to +85 °C)
),
Mounting options: The lights are available with magnet mount for easy positioning in any steel cabinet or enclosure. Other options
are the LED 025 with screw mount, and specifically designed clip holders for clip mount of the LED 025. These can be positioned
anywhere in the cabinet by simply screwing the holders to the cabinet wall. The light is snapped into the clip holders and can be
turned in both directions. With a total rotation angle of 180° it provides perfect illumination within the cabinet or enclosure.
Magnet mount end view
Part No. –
magnet mount
02540.3-10 02540.3-11 02540.3-13
02541.3-10 02541.3-11 02541.3-13
02542.3-10 02542.3-11 02542.3-13
02540.1-10 02540.1-11 02540.1-13
02541.1-10 02541.1-11 02541.1-13 DC 24 – 48 V (min. DC 20 V, max. DC 60 V) PIR motion sensor
02542.1-10 02542.1-11 02542.1-13 DC 24 – 48 V (min. DC 20 V, max. DC 60 V) N/A UL File No. E234324 VDE (REG.-Nr. E788)
1
VDE Certificate of Conformity (REG.-Nr. E788); 2 Passive Infrared (PIR) motion sensor is factory pre-set to turn the light off 5 minutes after all motion ceases
Part No. –
screw mount
Part No. –
clip mount
Operating voltage Switch type Approvals
AC 100 – 240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V)
DC 90 – 110 V (min. DC 80 V, max. DC 125 V)
AC 100 – 240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V)
DC 90 – 110 V (min. DC 80 V, max. DC 125 V)
AC 100 – 240 V, 50/60 Hz (min. AC 90 V, max. AC 265 V)
DC 90 – 110 V (min. DC 80 V, max. DC 125 V)
DC 24 – 48 V (min. DC 20 V, max. DC 60 V)
Screw mount end view
on/off switch UL File No. E234324 VDE (REG.-Nr. E788)
2
PIR motion sensor
N/A UL File No. E234324 VDE (REG.-Nr. E788)
on/off light switch UL File No. E234324 VDE (REG.-Nr. E788)
UL File No. E234324 VDE (REG.-Nr. E788)1CCC EAC
2
UL File No. E234324 VDE (REG.-Nr. E788)1CCC EAC
Clip mount end view
Note: The lights are not approved for household lighting.
1
1
1
1
CCC EAC
CCC EAC
CCC EAC
CCC EAC
Loading...