Stego KL 025 Data Sheet

Technical Data

Lighting

||

KL025/06-08/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

KL 025 Compact Enclosure Light

Magnet or DIN rail mounting

Energy-saving lamp

Integrated receptacle

On/off switch

Power consumption see table below

Luminosity 900 Lm

Lamp type compact fluorescent, G23 base, electronic ballast

Service life 5,000 hrs.

Switch on/off switch (for light only)

Connection 3-pole terminal AWG 14 max. (2.5mm²) with strain relief only

(cable not included), clamping torque 0.8Nm max.

Housing plastic, light grey

Mounting magnet mounting or on 35mm DIN rail, EN 60 715

Operating temperature -4 to +122°F (-20 to +50°C)

Storage temperature -49 to +158°F (-45 to +70°C)

Dimensions 13.98 x 2.56 x 2.76” (355 x 65 x 70mm)

Weight approx. 2.2 lbs (1.0kg)

Protection type IP20

The compact KL 025 light was designed for use in industrial enclosures and control cabinets. A
strong magnet allows simple and quick installation and flexibility for various mounting posi­tions. The light also features an optional integrated receptacle so that electrical devices can
easily be plugged in when needed.

Part No. Operating Voltage Receptacle Power consumption Receptacle Max. Current Protection class Approvals

02500.0-14 230VAC, 50Hz Germany 11W (~ 75W incandescent bulb) 16A I (grounded) VDE

02500.0-21 120VAC, 60Hz none 9W (~ 60W incandescent bulb) - II (double insulated) -

02505.9-02 120VAC, 60Hz USA/Canada 9W (~ 60W incandescent bulb) 15A I (grounded) -

2.56” (65 mm)

3.5” (90 mm) min.
recommended

2.76” (70 mm)

13.96” (355 mm)

Magnet

Drawing shows mounting on two 7 inch long pieces of 35mm DIN rail.