Stego FTD 011 Data Sheet

Technical Data

2.5” (63 mm)

1.3” (33 mm)

1.85” (47 mm)

Regulating and Monitoring

FTD 011 Tamperproof Dual Thermostat

||

FTD011/06-08/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

NC / NO or NO / NO in one unit

Fixed setpoints

Color coded modules

DIN rail mountable

Sensor element thermostatic bimetal

Contact type snap-action contact

Contact resistance < 20m

˜

Service life > 100,000 cycles

Max. switching capacity 10A resistive / 2A inductive @ 120VAC

5A resistive / 1.6A inductive @ 240VAC

DC 30W

Max. inrush current AC 10A

EMC acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3

Connection 4-pole terminal for AWG 14 max. (2.5mm²), torque 0.8Nm max.

Housing plastic according to UL 94V-0, light grey

Mounting clip for 35mm DIN rail, EN 60 715

Mounting position vertical

Operating temperature -4 to +176°F (-20 to +80°C)

Storage temperature -49 to +176°F (-45 to +80°C)

Dimensions 1.85 x 2.5 x 1.3” (47 x 63 x 33mm)

Weight approx. 14.1 oz. (40g)

Protection type IP20

Approvals UL File No. E164102, VDE

Part No.

NC - open on rise NO - close on rise

Switch-off temperature Switch-on temperature Switch-on temperature Switch-off temperature

01163.0-00 59°F / 15°C (± 9°F / 5K tolerance) 41°F / 5°C (± 9°F / 5K tolerance) 122°F / 50°C (± 11°F / 6K tolerance) 104°F / 40°C (± 12.6°F / 7K tolerance)

01163.0-01 77°F / 25°C (± 9°F / 5K tolerance) 59°F / 15°C (± 9°F / 5K tolerance) 140°F / 60°C (± 11°F / 6K tolerance) 122°F / 50°C (± 12.6°F / 7K tolerance)

01163.0-02 59°F / 15°C (± 9°F / 5K tolerance) 41°F / 5°C (± 9°F / 5K tolerance) 95°F / 35°C (± 11°F / 6K tolerance) 77°F / 25°C (± 12.6°F / 7K tolerance)

01163.0-03 77°F / 25°C (± 9°F / 5K tolerance) 59°F / 15°C (± 9°F / 5K tolerance) 122°F / 50°C (± 11°F / 6K tolerance) 104°F / 40°C (± 12.6°F / 7K tolerance)

Part No.

NO - close on rise NO - close on rise

Switch-on temperature Switch-off temperature Switch-on temperature Switch-off temperature

01164.0-00 122°F / 50°C (± 11°F / 6K tolerance) 104°F / 40°C (± 12.6°F / 7K tolerance) 140°F / 60°C (± 11°F / 6K tolerance) 122°F / 50°C (± 12.6°F / 7K tolerance)

Two thermostats in one housing:

Tamperproof (Pre-set) Thermostat - NC

Opens on temperature rise (red module housing) - for regulating heaters or for switching signal
devices when temperature has fallen below the minimum value.

Tamperproof (Pre-set) Thermostat - NO

Closes on temperature rise (blue module housing) - for regulating filter fans, heat exchangers, cool­ing devices or for switching signal devices when temperature limit has been exceeded.

Heaters and cooling equipment can be switched independently from each other with a temperature
offset as opposed to the usual SPDT/change-over contact.

Wiring examples

FTD 011 ThermostatHeater

e.g. Fan