Stego FF 01821 Data Sheet

Technical Data

0.7”

(18 mm)

6.5” (165 mm)

8.8” (224 mm)

5.6” (142 mm)

+0.2

7.3” (185 mm)

+0.2

2.6” (65 mm)2.4” (62 mm)

4.9” (125 mm)

Ventilating

||

FF01821/06-08/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

FF 01821 Outdoor Filter Fan 14 cfm

Quick and easy filter change

Lockable outer door

Impact resistant

Weather proof and UV resistant

This filter fan can be used in outdoor enclosures where warm air has to be dissipated. To clean
and exchange the filter mat, it is only necessary to open the lockable door of the outdoor hood
eliminating the need to allow interior access to the enclosure. A protection type of IP55 is
achieved due to the special design of the hood and the use of fine filter mats. The plastic cas­ing is impact resistant, highly weather proof and resistant to UV light.

Axial fan, ball bearing service life min. 50,000h at 77°F (25°C) and 65% RH

aluminum fan body, plastic rotor

Connection 2 wires w/ cage clamps, AWG 14 (2.5mm²), length 4” (100mm)

Filter fan and exhaust filter housing high impact ASA plastic, light grey

burning behavior according to UL 94H-B;

high resistance to weather and UV light

Mounting frame with double-sided industrial adhesive for mounting to the

outside of enclosure; certain operating circumstances may

make the additional use of screws necessary; cut-out

template included

Filter media rating F5 acc. to DIN EN 779, filtering degree 98%

Filter material synthetic fiber with progressive construction, temperature

resistant to 212°F, self-extinguishing class F1;

moisture resistant to 100% RH

Operating / Storage temperature -49 to +158°F (-45 to +70°C)

Protection class I (grounded)

Protection type IP55

Note: EMC version and other voltages are available upon request

The hood is attached permanently to the enclosure from the inside using provided screws. Filter mats can be

easily changed from outside the enclosure through the lockable door in the hood.

Filter mat 4.6 x 4.6” (118 x 118mm)

F5 (1 packing unit =3 pcs.) Part No. 08604.0-00

FFM 086 Filter Mats

Part No. Mounting depth Enclosure cut-out Weight (approx.) Filter mat Protection type

11821.0-00 0.6” (16mm) 4.9 x 4.9” 1.6 lbs. (0.60kg) F5 acc. to DIN EN 779, filtering degree 98% IP55

EF 118 Exit Filter

Part No.

Operating

voltage

Air volume,

free blowing

Power

consumption

Average noise level

(DIN EN ISO 4871)

Mounting depth

Enclosure

cut-out

Weight

(approx.)

Approvals

01821.0-00 230VAC, 50Hz

1)

12 cfm (20m³/h) 15W 40dB (A) 2.4” (62mm) 4.9 x 4.9” 2.6 lbs. (1.20kg) UL File No. E234324

01821.0-02 120VAC, 60Hz 14 cfm (23m³/h) 15W 40dB (A) 2.4” (62mm) 4.9 x 4.9” 2.6 lbs. (1.20kg) UL File No. E234324

FF 018 Outdoor Filter Fan

Outdoor Filter Fan

View from rear Outdoor Exhaust Filter

5.4” (137 mm)

5.4” (137 mm)

Ø0.12”

(3 mm)

Drilling template for

mounting frame

1)

air volume increases by 15% when operating 230VAC filter fans at 60Hz