Stego DCR 130 Catalog Page

­+

5.91" (150mm)

2.95" (75mm)

HIGH-PERFORMANCE FAN HEATER

18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.

PRODUCT CATALOG - STEGO, Inc.

DCR 130 |

5.61" (142,5mm)

6.61" (168mm)

DC 24 V, DC 56 V – 200 W to 800 W

> High DC heating performance
> Integrated adjustable thermostat or

hygrostat

> Small hysteresis

The compact high performance fan heater DCR 130 prevents formation of condensation and frost and provides
an evenly distributed interior air temperature in enclosures with electric/electronic components. The fan heater is
available with an integrated electronic thermostat or electronic hygrostat. The model with thermostat is available
with internal or external sensor. The fan heater with integrated hygrostat is equipped with an external sensor.
The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature
and humidity. The DCR 130 was designed for wall fixing. For fixing on the bottom of the enclosure the fan heater
DCR 030 is recommended.

TECHNICAL DATA

Heating element high performance cartridge

Overheat protection with automatic reset and second-tier one shot fuse

3.89" (99mm)

7.05" (179mm)

Heater body extruded aluminium profile

Axial fan, ball bearing service life 50,000 h at +77 °F (+25 °C)

Air flow, free blowing 94 cfm (160 m³/h)

Connection 2-pole „Push-In“ connection clamp stranded wire

Housing plastic, UL 94V-0, black

Mounting clip for 35 mm DIN rail, EN 60715 or M6 screws and washers

Mounting position vertical airflow (air outlet up)

Dimensions 3.9 x 6.6 x 7.0" (99 x 168 x 179 mm)

Weight approx. 2.86 lbs. (1.3 kg)

Operating temperature -4 to +167 °F (-20 to +75 °C)

Storage temperature -40 to +176 °F (-40 to +80 °C)

Operating / Storage humidity max. 90 % RH (non-condensing)

Protection type / Protection class IP20 / II (double insulated)

Approvals UL File No. E234324, VDE, EAC

Note other versions (heating capacities, setting ranges) as well as

¹ When connecting with stranded wires, wire end ferrules must be used.

> Integrated switch module
> Panel or DIN rail mounting
> Optical indicator (LED)

to protect against overheating in case of fan failure

(1.5 mm²) with strain relief; max. AWG 12 (2.5 mm²)

(not included), torque 2 Nm max.

operating voltage DC 48 V on request

1

AWG 16

Wiring diagram

M

INT

EXT

41

18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.

41

Part No. Model Operating voltage

13092.1-16 Fan heater with integrated thermostat
with internal temperature sensor

13092.1-17

13097.3-16 Fan heater with integrated thermostat with

13097.3-17 Fan heater with integrated thermostat with

13092.1-03 Fan heater with integrated hygrostat with

13095.3-03 Fan heater with integrated hygrostat with

Fan heater with integrated thermostat with
connector for external temperature sensor²

internal temperature sensor

connector for external temperature sensor²

connector for external humidity sensor²

connector for external humidity sensor²

DC 24 V

DC 24 V

DC 56 V

DC 56 V

DC 24 V

DC 56 V

Heating capacity Recommended pre-fuse T

200 W 25.0 A -4 to 104 °F

200 W 25.0 A

800 W 25.0 A -4 to 104 °F

800 W 25.0 A -4 to 104 °F

200 W 25.0 A 40 to 90 % RH

600 W 25.0 A 40 to 90 % RH

(time-delay)

temperature / humidity

² The external sensor needs to be ordered separately.
³ Switching difference temperature: 3 K (±1 K tolerance) at +77 °F (+25 °C), 50 % RH; Switching difference humidity: 4 % RH (±1 % tolerance) at +77 °F (+25 °C), 50 % RH.

ACCESSORIES

The external sensor is not included in the delivery of the DCR 130. It can be ordered separately.

EXTERNAL SENSOR

The external sensor can be positioned freely anywhere in the enclosure for precise measurements of temperature and humidity.

Setting range3

-4 to 104 °F

Part No. Length

267071 3.28 ft (1 m)
267072
267126 9.84 ft (3 m)

6.56 ft (2 m)