Technical Data
Heating
||
CS060/06-08/US
Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: (770) 984-0858 · Fax: (770) 984-0615
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
CS 060 Touch-Safe Heater 50 - 150W
Low surface temperature
Compact size
Wide voltage range
Double insulated protection
DIN rail mountable
The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on
the accessible side surfaces of the housing are minimized as a result of the heater design. The
CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring
(CSF 060).
Operating voltage 120-240VAC* (min. 110V, max. 265V)
Heating capacity see table
Heating element PTC resistor - temperature limiting
Surface temperature < 176°F (80°C), except upper protective grill
Connection 4-pole terminal AWG 14 max (2.5mm²), torque 0.8Nm max.
Housing plastic, UL 94V-0, black
Mounting clip for 35mm DIN rail, EN 60 715
Mounting position vertical
Operating / Storage temperature -4 to +158°F (-20 to +70°C) / -49 to +158°F (-45 to +70°C)
Protection class / Protection type II (double insulated) / IP20
Approvals UL File No. E150057, VDE
Note other voltages available upon request
*Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Part No. Heating capacity
1)
Max. current (inrush) Air outlet temperature
2)
Dimensions Weight (approx.)
06000.0-00 50W 2.5A 187°F (86°C) 4.3 x 2.4 x 3.5” (110 x 60 x 90mm) 290g
06010.0-00 100W 4.5A 248°F (120°C) 4.3 x 2.4 x 3.5” (110 x 60 x 90mm) 300g
06020.0-00 150W 8A 293°F (145°C) 5.9 x 2.4 x 3.5” (150 x 60 x 90mm) 440g
Wiring examples