Stego CREx 020 Catalog Page
D
H
1" (25mm)
X
HAZARDOUS AREA HEATER
18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
PRODUCT CATALOG - STEGO, Inc.
CREx 020 |
H (Height)
W (Width)
D (Depth)
W
CREx 020
with DIN clip
50 W to 250 W (T3)
CREx 020 with
screw mounting
brackets
> For use in hazardous areas
(explosion hazard & mines)
> Large convection surface
> Ready-to-use with strain relief
> Maintenance free
> Temperature class T3
> DIN rail and screw mounting
Compact convection heater of temperature class T3 (392 °F / 200 °C max.) for prevention of formation of
condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in
measuring equipment located in areas with explosion hazard, underground mines or mines susceptible to firedamp.
TECHNICAL DATA
Temperature class T3
Ex Protection type
Gases
Dusts
Mine applications
Ambient temperature -76 to +185 °F (-60 to +85 °C)
Surface temperature max. +392 °F (+200 °C)
Heating element high performance cartridge
Heating body aluminum profile, silver anodized
Connection silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²)
Connection PE AWG 18 to 14 (0.75 to 2.5 mm²)
Mounting clip for 35 mm DIN rail, EN 60715 for heating body sizes
Mounting position vertical airflow (connection at bottom)
Storage temperature -76 to +185 °F (-60 to +85 °C)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP66 / I (grounded)
Approvals EPS 16 ATEX 1 109 X
II 2 GD
Ex db IIC T3 Gb
Ex tb IIIC T200 °C Db IP66
I M2 Ex db I Mb
3.2 x 1.9" and 4.7 x 2.4"; screw mounting with 2 mounting
brackets for all heating body sizes, optional sideways mounting
IECEx EPS 16.0048X
IN METRO DNV 18.0010 X
EAC TC RU C-FR.ГБ08.В.02639
Part No. DIN clip mount Part No. screw mounting brackets Operating
Cable 3.28 ft
(1.0 m)
02031.0-00 02031.0-02 02031.0-10 02031.0-12 5.9" (150 mm) AC 230 V 50 W 0.5 A 3.2 x 1.9 x 4.3" (80 x 48 x 110 mm) 1.5 lbs (0.7 kg)
02031.9-00 02031.9-02 02031.9-10 02031.9-12 5.9" (150 mm) AC 120 V 50 W 1.0 A 3.2 x 1.9 x 4.3" (80 x 48 x 110 mm) 1.5 lbs (0.7 kg)
02032.0-00 02032.0-02 02032.0-10 02032.0-12 8.9" (225 mm) AC 230 V 100 W 1.0 A 3.2 x 1.9 x 7.1" (80 x 48 x 180 mm) 2.2 lbs (1.0 kg)
02032.9-00 02032.9-02 02032.9-10 02032.9-12 8.9" (225 mm) AC 120 V 100 W 2.0 A 3.2 x 1.9 x 7.1" (80 x 48 x 180 mm) 2.2 lbs (1.0 kg)
02033.0-00 02033.0-02 02033.0-10 02033.0-12 8.9" (225 mm) AC 230 V 150 W 1.5 A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) 3.1 lbs (1.4 kg)
02033.9-00 02033.9-02 02033.9-10 02033.9-12 8.9" (225 mm) AC 120 V 150 W 3.0 A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) 3.1 lbs (1.4 kg)
02034.0-00 02034.0-02 02034.0-10 02034.0-12 11.8" (300 mm) AC 230 V 200 W 2.0 A 4.7 x 2.4 x 9.5" (120 x 60 x 240 mm) 3.7 lbs (1.7 kg)
02034.9-00 02034.9-02 02034.9-10 02034.9-12 11.8" (300 mm) AC 120 V 200 W 4.0 A 4.7 x 2.4 x 9.5" (120 x 60 x 240 mm) 3.7 lbs (1.7 kg)
- - 02035.0-10 02035.0-12 10.8" (275 mm) AC 230 V 250 W 2.5 A 6.3 x 3.2 x 8.6" (160 x 80 x 220 mm) 5.1 lbs (2.3 kg)
- - 02035.9-10 02035.9-12 10.8" (275 mm) AC 120 V 250 W 5.0 A 6.3 x 3.2 x 8.6" (160 x 80 x 220 mm) 5.1 lbs (2.3 kg)
Cable 6.56 ft
(2.0 m)
Cable 3.28 ft
(1.0 m)
Cable 6.56 ft
(2.0 m)
Hole spacing X
voltage
Heating
capacity
Rec.
pre-fuse T
(time-delay)
Dimensions
(D x W x H)
Weight
approx.
D
H
HAZARDOUS AREA HEATER
1" (25mm)
X
18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.
EX PROTECTION
111
111
CREx 020 |
H (Height)
W (Width)
D (Depth)
W
CREx 020
with DIN clip
50 W to 200 W (T4)
CREx 020 with
screw mounting
brackets
> For use in hazardous areas
(explosion hazard & mines)
> Large convection surface
> Ready-to-use with strain relief
> Maintenance free
> Temperature class T4
> DIN rail and screw mounting
Compact convection heater of temperature class T4 (275 °F / 135 °C max.) for prevention of formation of
condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in
measuring equipment located in areas with explosion hazard, underground mines or mines susceptible to firedamp.
TECHNICAL DATA
Temperature class T4
Ex Protection type
Gases
Dusts
Mine applications
Ambient temperature -76 to +122 °F (-60 to +50 °C)
Surface temperature max. +275 °F (+135 °C)
Heating element high performance cartridge
Heating body aluminum profile, silver anodized
Connection silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²)
Connection PE AWG 18 to 14 (0.75 to 2.5 mm²)
Mounting clip for 35 mm DIN rail, EN 60715 for heating body sizes
Mounting position vertical airflow (connection at bottom)
Storage temperature -76 to +185 °F (-60 to +85 °C)
Operating / Storage humidity max. 90 % RH (non-condensing)
Protection type / Protection class IP66 / I (grounded)
Approvals EPS 16 ATEX 1 109 X
II 2 GD
Ex db IIC T4 Gb
Ex tb IIIC T135 °C Db IP66
I M2 Ex db I Mb
3.2 x 1.9" and 4.7 x 2.4"; screw mounting with 2 mounting
brackets for all heating body sizes, optional sideways mounting
IECEx EPS 16.0048X
IN METRO DNV 18.0010 X
EAC TC RU C-FR.ГБ08.В.02639
Part No. DIN clip mount Part No. screw mounting brackets Operating
Cable 3.28 ft
(1.0 m)
02041.0-00 02041.0-02 02041.0-10 02041.0-12 5.9" (150 mm) AC 230 V 50 W 0.5 A 3.2 x 1.9 x 4.3" (80 x 48 x 110 mm) 1.5 lbs (0.7 kg)
02041.9-00 02041.9-02 02041.9-10 02041.9-12 5.9" (150 mm) AC 120 V 50 W 1.0 A 3.2 x 1.9 x 4.3" (80 x 48 x 110 mm) 1.5 lbs (0.7 kg)
02042.0-00 02042.0-02 02042.0-10 02042.0-12 8.9" (225 mm) AC 230 V 100 W 1.0 A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) 3.1 lbs (1.4 kg)
02042.9-00 02042.9-02 02042.9-10 02042.9-12 8.9" (225 mm) AC 120 V 100 W 2.0 A 4.7 x 2.4 x 7.1" (120 x 60 x 180 mm) 3.1 lbs (1.4 kg)
- - 02043.0-10 02043.0-12 10.8" (275 mm) AC 230 V 150 W 1.5 A 6.3 x 3.2 x 8.6" (160 x 80 x 220 mm) 5.1 lbs (2.3 kg)
- - 02043.9-10 02043.9-12 10.8" (275 mm) AC 120 V 150 W 3.0 A 6.3 x3.2 x 8.6" (160 x 80 x 220 mm) 5.1 lbs (2.3 kg)
- - 02044.0-10 02044.0-12 13.8" (350 mm) AC 230 V 200 W 2.0 A 6.3 x 3.2 x 11.8" (160 x 80 x 300 mm) 6.2 lbs (2.8 kg )
- - 02044.9-10 02044.9-12 13.8" (350 mm) AC 120 V 200 W 4.0 A 6.3 x 3.2 x 11.8" (160 x 80 x 300 mm) 6.2 lbs (2.8 kg)
Cable 6.56 ft
(2.0 m)
Cable 3.28 ft
(1.0 m)
Cable 6.56 ft
(2.0 m)
Hole spacing X
voltage
Heating
capacity
Rec.
pre-fuse T
(time-delay)
Dimensions
(D x W x H)
Weight
approx.
Loading...