Stego CR 130 Data Sheet

Technical Data

Heating

||

CR130/06-08/US

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.

STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]

Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com

Compact design

Built-in overheat protection

Integrated adjustable thermostat or fixed hygrostat

Double insulated plastic housing

Panel or DIN rail mounting

The compact CR 130 high performance fan heater prevents formation of condensation and pro­vides an evenly distributed interior air temperature in enclosures. This fan heater is available
with an integrated thermostat for temperature control or a pre-set hygrostat for humidity con­trol. The CR 130 was designed as a stationary unit for panel or DIN rail mounting. For foot
mounting on the bottom of an enclosure, the CR 030 fan heater is recommended.

Heating element high performance cartridge

Overheat protection built-in temperature limiter

Heater body extruded aluminum

Axial fan, ball bearing service life 50,000h at 77°F (25°C)

Air flow, free blowing 94 cfm (160m³/h)

Connection 2-pole terminal AWG 16 max. (1.5mm²) with strain relief,

clamping torque 0.8Nm max.

Housing plastic, UL 94V-0, black

Mounting clip for 35mm DIN rail, EN 60 715 or M6 screws (not included)

Mounting position horizontal

Operating* / Storage temperature -49 to +158°F (-45 to +70°C)

Dimensions 3.9 x 6.3 x 7.2” (99 x 160 x 182mm)

Weight approx. 3.1 lbs. (1.4kg)

Protection class II (double insulated)

Protection type IP20

* Operating temperature of heater with integrated hygrostat: +32 to +140°F (0 to +60°C)

CR 130 Panel-mount Fan Heater 950W

30

7.2” (182 mm)

5.6” (142 mm)

3.9” (99 mm)

6.3” (160 mm)

2.6” (67 mm)

Part No. Heating capacity Operating voltage Setting range Approvals

13051.0-00 950W 230VAC, 50/60Hz 0 to 60°C UL File No. E234324, VDE

13051.0-02 950W 230VAC, 50/60Hz 65% RH, factory-set UL File No. E234324, VDE

13059.9-00 950W 120VAC, 50/60Hz 32 to 140°F UL File No. E234324

13059.9-02 950W 120VAC, 50/60Hz none (no integrated controls) UL File No. E234324

LL

NN

M

Wiring diagram