Stego CP 061 Catalog Page

4" (100 mm)

L

mm)

FLAT HEATER

18.02.2020 | Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application.

HEATING

19

19

CP 061 |

X

50 W, 100 W

3.3" (84 mm)

3" (75 mm)

0.26" (6,5 mm)

0.32" (8

> Contact/Convection heater
> Ultra flat design
> Compact
> Easy, firm installation

> Screw fixing
> Linear expansion compensation
> Integrated temperature cut-out
> Ready-to-use with strain relief

The Flat Heater CP 061 is used to provide an evenly distributed temperature within enclosures and cabinets with
electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications
for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can
be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive
contact to a component or a cabinet wall in need to be heated. Additionally, a mounting system especially
designed for the CP 061 allows for the compensation of an expansion of the heater body as a result of the
heating-up when in operation. Operated as a convection heater, the slim heater CP 061 warms up the ambient air
within a cabinet. The CP 061 is designed for permanent operation.

TECHNICAL DATA

Heating element resistance heater

Overheat protection with automatic reset

Heater body aluminum profile

Surface temperature max. +302 °F (+150 °C) at +77 °F (+25 °C)

Connection silicone cable (halogen-free) 3 x AWG 18 (0.75 mm²),

Connection casing plastic, UL 94V-0, black

Mounting screw mount M6 (not included)

Fitting position horizontal, variable connection or

Dimensions L x 4" x .32" (L x 100 x 8 mm)

Operating/Storage temperature

Operating/Storage humidity max. 90 % RH (non-condensing)

Protection type/Protection class IP30 / I (grounded)

Note other voltages (AC 120 V) available on request

length 3 ft (1 m)

vertical, connection on bottom

-40 to +140 °F (-40 to +60 °C) / -40 to +185 °F (-40 to +85 °C)

40" ( 1000 mm)

2.4" (60 mm)

Wiring example

Part No. Operating voltage Heating capacity Length (L) Hole spacing (X) Weight approx. Approvals

06100.0-00 AC 230 V, 50/60 Hz 50 W 9.41" (239 mm) 8.9" (225 mm) .88 lbs (0.4 kg) VDE EAC

06101.0-00 AC 230 V, 50/60 Hz 100 W 16.3" (414 mm) 15.75" (400 mm) 1.54 lbs (0.7 kg) VDE EAC