
Installation Gu
ide
ToolsRequired
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
PARTS BAG
BULB BASE TYPE
Candelabra (E12)
Quick Link
D
x2
LightSource
60W
MAX
BULB SHAPE
TYPE B
5BULBSREQUIRED
BULBSNOTINCLUDED
FixtureHeightAdjustable
25.5”to121.5”
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Shade
G
x5
Fixture Loop
H
x1
Crossbar Assembly
A
x1
Outlet Box Screw
B
x2
Wire Connector
C
x3
Table of
Contents
Fixture Loop
Fixture Chain
E
x1
Ceiling Canopy
F
x1
Crossbar Assembly Fixture Chain
STEP 2 STEP 3 STEP 5 STEP 6
Wiring
STEP 4STEP 1
Ceiling Canopy Shade and Bulb
Fixture Body
I
x1
1of4

STEP 1
STEP 2
1 2
Step 1
Install crossbar assembly
STEP 3
1
Step 1
Adjust fixture chain length
Test fitting ceiling canopy to nipple
Step2-3
2
Step2-3
Install Fixture Chain
3
3
Suggested Chain Length:
8’ ceiling:
9’ ceiling:
10’ ceiling:
10” Chain
22” Chain
32” Chain
N
L
L
N
2of4

STEP 4
1 2
Feed the fixture wires
Step 1
through the loop
L
N
White wire (neutral)
from outlet box
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
*Green Ground Screw
on crossbar optional
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
Ground wire
from Fixture
STEP 5
3of4