Page 1
MOUNTING AND WIRING
WARNING:
Improper installation may cause electrical shock, fire, or equipment damage.
The person performing the installation must befamiliar with the construction
and operation ofthe product and associated hazards
A-Existing Electrical Box
A-Existing Electrical Box
B-Crossbar
D-Junction Cap
E-Decorative Nuts
B-Crossbar
C-Crossbar Screws
C-Crossbar Screws
F-CanopyF-Canopy
INSTALLATION INSTRUCTIONS
IMP OR T AN T SAFE TY IN STRUCTION S:
.
Please read through all the instructions carefully and completely before
beginning assembly and installation
This product must be installed in accordance with installation instructions
.
and all safety and building codes. It is strongly suggested that all direct
wiredfixtures be installed by a licensed electrician
.
Be sure the electricity to the wires you are working on is shut off; either the
use is removed or the circuit breaker is turned off. Turning the power o
f
using the light switch is not sufficient to prevent electrical shock
ff
Wire Connection Diagram:
Please pro ceed in an alph abetical order:
.
Attach the Round Crossbar (B) on the Electrical Box (A) with Crossbar screw (C).
.
Secure the Ground Wire on the Round Crossbar (B).
.
Connect the power source wire (L) & (N) with black & white main wire witd
Junction Cap (D).
.
Secure the fixture Canopy (F) on the Round Crossbar （B) with Decorative Nute
(E).
P A R T LIST AND ASSEMBL Y ILLUSTR ATION
Note :Some parts may be pre-installed or pre-assembled.
WARNING:
warning to be given to customers in the State of California.)
CALIFORNIA PROPOSITON 65 WARNING
This product contains chemicals known to the State of California to cause
(California law requires thiscancer and birth defects or other reproductive harm.
For more information:www.P65Warnings.ca.gov
ASSEMBLING, INSTALLATION, AND MOUNTING
Loading...