Page 1
MOUNTING AND WIRING
WARN ING:
Improper installation may cause electrical shock,fire, or equipment damage.
The person performing the installation must befamiliar with the construction
and operation ofthe product and associated hazards
A-Existing Electrical Box
B-Crossbar
C-Crossbar Screws
F-Junction Cap
E-Canopy
D-Decorative Nuts
Wire Connection Diagram:
INSTALLATION INSTRUCTIONS
IMPOR TAN TSAFE TY INSTRUCTIONS:
.
Please read through all the instructions carefully and completely before
beginning assembly and installation
.
This product must be installed in accordance with installation instructions
and all safety and building codes. It is strongly suggested that all direct
wired fixtures be installed by a licensed electrician
.
Be sure the electricity to the wires you are working on is shut off; either the
fuse is removed or the circui t breaker is turned off. Turning the power off
using the light switch is not sufficient to pre vent electrical shock
Please proceed in an alphabetical order:
.
Attach the Crossbar (B) to existing Electrical Box (A) with the Crossbar Screws
(C), which were not included but already in your Electrical Box.
.
Secure the Ground Wire on the Crossbar (B).
.
Connect the power source wire (L) & (N) with black & white main wire with
Junction Cap (F).
.
Secure the fixture Canopy (E) on the Crossbar (B) with Decorative Nuts (D).
ART L IST AND ASSEMBL Y ILLUSTR ATION
te:Some parts may be pre-installed or pre-assembled.
WARNING:
warning to be given to customers in the State of California.)
CALIFORNIA PROPOSITON 65 WARNING
This product contains chemicals known to the State of California to cause
For more information:www.P65Warnings.ca.gov
(California law requires thiscancer and birth defects or other reproductive harm.
ASSEMBLING, INSTALLATION, AND MOUNTING
Loading...