Page 1
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1.
Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Parts:
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Hex Nut (E)
Washer (F)
Nipple(G)
Top Loop (H)
Canopy (I)
Collar (J)
Loop Lock (K)
Chain (L)
1. Attach nipple to the mounting strap, then secure it with a washer
Outlet Box
House Grounding Wire
Wire Nut (D)
Fixture Wire
Hex Nut (E)
Washer (F)
Fixture Grounding Wire
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Nipple(G)
Top Loop (H)
Canopy (I)
Collar (J)
Loop Lock (K)
Chain (L)
and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting
screws.
3. Attach loop to the center body.
4. Adjust the arms of the fixture according to the drawing of the
Loop
Center Body
package.
Important:
a. The arms should be positioned with equal distances
between them.
Bulb Type B Max.60W
(not included)
b. The arms should be fixed securely.
5. Choose the length of the chain you need, then weave the fixture
wire and the fixture grounding wire through the chain.
6. Secure the top loop to nipple.
7. Thread the fixture wire and fixture grounding wire
through the collar, canopy, top loop, nipple and
mounting strap.
8. Connect the other end of the chain with the top loop
by using the loop lock.
9. Pull out the outlet wires and the house grounding wire from
the outlet box. Make wire connections by using the wire nuts:
---The smooth wire (marked) from the fixture to the black wire
from the power source.
Decorative Cover
---The ridged wire (unmarked) from the fixture to the white wire
from the power source.
---Attach the fixture grounding wire to the mounting strap with
Finial
the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
Page 2
11. Slide decorative cover onto the center body. Thread the finial onto the center body.
Note: Adjust the decorative cover, Make sure that the hooks of decorative cover and the
arms of fixture are lined up continuous.
12. Install bulbs(not included). See relamping label at socket area or packaging for maximum allowed
wattage.
13. Turn on the power at the main fuse or circuit breaker box.
A
B
A: 18"
B: 28"
Loading...