STEELMATE 986 Users Manual

986 MOTORCYCLE ALARM SYSTEM USER’S MANUAL

INTRODUCTION

Congratulations on your wise choice of our motorcycle security system.

The design comes from rich imagination of skilled and experienced electronics engineers and integrates our
experience of success. Our personal design always comes along all the vogue in the world.

In the production process computer automatic assembling and ICT technology is used to guarantee the high
quality and the reliability of the system. Strict delivery inspection makes the system complete in its
performance and excellent in its functions.

To avoid any lost which is caused by robbery, installing a high quality motorcycle alarm system is the best
choice.

Please read the circuit diagram carefully and install the system with a skilled mechanic to guarantee complete
installation.

Thanks

REMOTE FUNCTION AND OPERATOIN FOR MODEL 986 MOTORCYCLE ALARM SYSTEM

FCC/ID Q6W986

FCC NOTICE:

(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following

or similar statement, placed in a prominent location in the text of the manual:

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

BRIEF INTRODUCTION OF FUNCTIONS

Press button

to locate the motorcycle in parking lot

Press button

--- in driving status: to stop the engine of the motorcycle

--- in alarm status: to stop alarm, and disarm the motorcycle

Press button

FUNCTIONS

1. Arming

Press
turns into arming mode automatically.

2. Disarming

In arming mode, press button
does not start in 30 seconds, the system will return to arming mode automatically.

Press button

button to arm the motorcycle in alarm mode. The siren will chirp once with a direction light flash. The system

--- in general status: to arm the motorcycle in 3 seconds

--- in driving status: to enter anti-robbery status for emergency alarm

--- in alarm status: to stop chirping temporary and keep on arming mode

--- in armed status: to disarm the motorcycle

--- in general status: to start the engine of the motorcycle

to disarm the system temporarily. If the motorcycle haven’t be touched or the engine

for 1 second to disarmed they system completely.