STEELMATE 888A Users Manual
888 TWO WAY CAR ALARM SYSTEM USER’S MANUAL
INTRODUCTION
Congratulations on your wise choice of Steel mate Car Alarm System!
Steelmate Co., Ltd. is a leading supplier to the automotive industry. We use our best endeavors to provide a range
of highly innovative security and safety products to meet the needs of our customers.
Through its innovative technology and best practice manufacturing facilities, Steelmate is (becoming) the market leader
in China. Its high quality products, unique designs, and comprehensive after sales service ensure that Steelmate
remains the first choice of Motor Vehicle Owners.
Steelmate is not just a Brand... it is a culture ... a group of people striving to provide better and more efficient products
in a rapidly changing world. It is a group of people who work hard, and stake their reputations on a successful outcome.
With this kind of culture, with its expertise and with the customers needs firmly in mind, Steelmate is striving to be the
Premier Brand in the vehicle market.
Steelmate's expertise and experience will provide your vehicle with lifetime security.
Thanks
Features:
1. Long distance surveillance range
2. Two-way remote controller with color LED monitor
3. FSK technique, high stability and anti-jamming
4. Sound, vibrancy, figure indicate the status and function
REMOTE FUNCTION AND OPERATOIN FOR MODEL 888 CAR ALARM SYSTEM
FCC/ID Q6W888A
FCC NOTICE:
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement,
placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
To press button on the remote to activate the alarm system:
Press button
--- in driving status: to lock door
--- in alarm status: to stop alarm and return to the arm status.
Press button
--- in driving status: to unlock door.
--- in alarm status: to stop alarm, disarm the car and unlock door.
Press button
Press button
--- in driving status: the siren chirps for 30 seconds, direction lights flash
Press button
--- in driving status: into pre-anti-robbery status for emergency alarm
--- in general status: to arm the car and lock door in 3 seconds.
--- in armed status: to disarm the car and unlock door.
--- in general status, to arm the car with mute mode in 3 second, at the same time, the
direction lights flash once.
+ --- in general status: the siren chirps for 15 seconds, direction lights flash
+ --- in general status: to open the trunk of the parked car (trunk release)
1. Alarm Armed:
Press button
one acoustic signal of remote, doors will lock, the system will be armed in 3 seconds in alarm mode. The display
on the remote is:
2. Mute Armed:
Press button
doors will lock, the system will be armed in 3 seconds in mute mode. The display on the remote is:
3. Disarm the system in alarm mode
In alarm armed status, press button
direction lights will flash twice, the siren will chirp twice and the remote will beep. The display on the remote is:
4. Disarm the system in mute mode
In alarm armed status, press button
direction lights will flash twice, the siren will not chirp and the remote will beep. The display on the remote is:
5. Trunk opening with remote
on the remote, is signaled by one flash of the direction lights, one acoustic signal of siren and
on the remote, is signaled by one flash of the direction lights, one acoustic signal of remote,
to disarm the system, at the same time, the doors will be unlocked, the
to disarm the system, at the same time, the doors will be unlocked, the
Press button
6. Auto lock/unlock the door
The doors will be locked when the foot brake is pressed in 15 seconds after the car started. The doors will be
unlocked when the car stopped and the ACC is on off position.
In driving status, press button
7. Locating the vehicle in parking lot with sound and flash
+ at the same time to open the trunk of the parked car. The display in the remote is:
to lock the doors, press button to unlock the doors.
Loading...