Steel City 45950G, 45950C User Manual

45950G
45950C

36”

52”

09.2014

N

2 YEAR LIMITED WARRANTY

Steel City Tool Works, LLC (SCTW) warrants this SCTW machinery to be free of defects in workmanship and materials for a period
of 2 years from the date of the original retail purchase by the original owner for domestic use. Granite components are warranted for
2 years based on normal use and is void if non SCTW accessories are used that cause the break or chip. Customer must advise
SCTW within 30 days for any damage or defect found upon receipt of the product to qualify for the warranty on granite.

The warranty does not cover any product used for professional or commercial production purpose nor for industrial or educational
applications. Such cases are covered by our 1 year Limited Warranty with the Conditions and Exceptions listed below.

Conditions and exception:

Warranty applies to the original buyer only and may not be transferred. Original proof of purchase is required.

Warranty does not include failures, breakage or defects deemed after inspection by an Authorized Service Center, (ASC) or agent of,
have been directly or indirectly caused by or resulting from improper use, lack of or improper maintenance, misuse or abuse,
negligence, accidents, damage in handling or transport, or normal wear and tear of any part or component.

Additionally, warranty is void if repairs or alterations are made to the machine by an unauthorized service center without the direct
consent of SCTW

Consumables such as blades, knives, bits and sandpaper are not covered.
Wear items such as drive belt, bearings, switch, are covered for 1 year.

To file a claim of warranty or to find a service center, call toll free 877-724-8665 or email [e-mail]

and

you must be able to present the original or photo copy of the sales receipt including the serial number from the machine and/or carton.

SCTW will inspect, repair or replace, at its expense and its option, any part that has proven to be defective in workmanship or
material, provided that the customer returns the product prepaid to a designated ASC and provides SCTW with a reasonable
opportunity to verify the alleged defect by inspection. SCTW will return the product or replacement at our expense unless it is
determined by us that there is no defect or that the defect resulted from causes not within the scope of our warranty in which case we
will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible
for the handling and shipping costs of the return.

SCTW furnishes the above warranties in lieu of all other warranties, express or implied. SCTW shall not be liable for any special,
indirect, incidental, punitive or consequential damages, including without limitation loss of profits arising from or related to the
warranty, the breach of any agreement or warranty, or the operation or use of its machinery, including without limitation damages
arising from damage to fixtures, tools, equipment, parts or materials, direct or indirect loss caused by and other part, loss of revenue
or profits, financing or interest charges, and claims by and third person, whether or not notice of such possible damages has been
given to SCTW. Damages or any kind for any delay by or failure of SCTW to perform its obligations under this agreement or claims
made a subject of a legal proceeding against SCTW more than one (1) year after such cause of action first arose.

The validity, construction and performance of this Warranty and any sale of machinery by SCTW shall be governed by the law of the
Commonwealth of Pennsylvania, without regard to conflicts of law’s provisions of any jurisdiction. Any action related in any way to
any alleged or actual offer, acceptance or sale by SCTW or any claim related to the performance of and agreement including without
limitation this Warranty, shall take place in the federal or state courts in Allegheny County, Pennsylvania.

Warranty registration card must be submitted to SCTW for purpose of proof within 90 days of purchase with a copy of the sales
receipt. Failure to do so will, revert the 2 year warranty to 1 year as in the terms stated above. This registration is also needed to
facilitate contact in case of a safety recall.

This warranty gives you specific legal rights and you may have other rights which vary in certain States or Provinces.

Note to user
This instruction manual is meant to serve as a guide only. Specification and references are subject to change without prior notice.
Check the website www.steelcitytoolworks.com

for updated manuals with reference to the VER# located on the front page.

LIMITED WARRANTY – ACCU-SHOP line of bench top tools

Steel City Tool Works, LLC (SCTW) warrants this SCTW ACCU-SHOP machinery to be free of defects in workmanship and materials
for a period of 2 years from the date of the original retail purchase by the original owner for domestic use.
Consumables such as blades, knives, bits and sandpaper are not covered.
Wear items such as drive belt, bearings, switch, are covered for 1 year.

The warranty does not cover any product used for professional or commercial production purpose nor for industrial or educational
applications. Such cases are covered by our 30 days Limited Warranty with the Conditions and Exceptions listed previously.

WARRANTY

4

FOLD ON DOTTED LINE

FOLD ON DOTTED LINE

PLACE
STAMP

HER

SteelCityToolWorks

#4 Northpoint Court

Bolingbrook, IL 60440

E

6

2

45950G

45950C

with Table & Extension Wings

6

2

8

45950G

45950C

50

50

2

45950G, 45950C

place.

50

hex soc

handle to keep the blade from further tilting.

SEE FIG. 30 (D)

PARTS

35

36

KEY
NO.

PART NO. DESCRIPTION QTY KEY NO. PART NO. DESCRIPTI ON QTY

41 OR91789 NYLON SET SCR 1/4-28x 3/8" 4 * OR90712 SWITCH ASSY (#60 - #76) 1

42 SC10772 TABLE INSERT PA D 1 60 OR91060 SWITCH PADDLE 1

44 SC10486 TABLE INSERT 1 60A SC10210 SW ITCH COVER ASSY 1

48 SC10487 MAGNET Ħ8x5 4 61 SC80411 ROUND HD TAP SCR M4x25 2

62 OR90343 SWITCH˄HY56˅ 1

63 OR91063 SWITCH BOX 1

40 SC11020 LEFT GRANITE EXTENSION WING 1 63A OR91579 SWITCH RESET LABEL 1

49 SC10979 GRANITE TABLE ASSY 1 64 SC80410 ROUND HD TAP SCR M4x16 4

52 SC11021 RIGHT GRANITE EXTENSION WING 1 66 OR91062 SWITCH SUPPORT 1

53 SC10981 ALUM SLIDE SLOT 2 68 OR90381 HEX NUT M5 2

53A SC10982 Countersunk Flat Hd Sc r with cros s recess M5x10 8 69 OR90362 EXT TOOTH WA SHER M5 4

70 OR90505 PAN HD SCR W/CROSS RECESS M5x12 2

73 OR70139 RESET SWITCH (25Amp,125/250V) 1

40 SC11022 LEFT CAST IRON EXTENSION W ING 1 74 OR91032 JUMPER WIRE (BLACK) 1

49 SC10984 CAST IRON TABLE ASSY 1 75 OR91007 SWITCH CORD W/FEMALE DISCONNECTOR 1

52 SC11023 RIGHT CAST IRON EXTENSION W ING 10" 1 75A OR70141 STRAIN RELIEF(7P-2) 2

54 SC80470 HEX SOC HD CAP SCR 5/16-18x50mm 12 76 OR91030 POW ER CORD 14AWG 1

55 OR90248 LOCK W ASHER M8 12 * SC10160 MITER GAUGE ASSY (#114 - #132) 1

56 OR91084 SPECIAL WASHER (8.3x25x3.5) 12 114 OR91076 MITER GAUGE BODY 1

115 SC10161 SPECIAL PLATE 3

116 SC10162 SPECIAL SCREW 2

119 SC10163 GUIDE BAR 1

120 OR91763 SE T SCR M4x16 4

121 OR91783 PIN 1/4"x3/4" 1

122 OR91774 PA N HD SCR M4x10 2

122A OR90143 FLAT W ASHER M4 2

123 OR91080 PLUNGER 1

124 OR91081 PLUNGER BLOCK 1

125 OR91082 CURSOR 1

126 OR91775 PA N HD SCR M4x15 1

127 OR94404 PA N HD SCR M4x20 3

127A OR90078 HEX NUT M4 3

130 OR91573 MITER SCALE 1

131 OR91084 SPECIAL WASHER (8.3x25x3.5) 1

132 SC10153 MITER GAUGE KNOB 1

45950G TABLE & GRANITE EXTENSION W I NG ASSY

45950C TABLE & CAST IRON EXTENSION W ING

37

38

39

KEY
NO.

PART NO. DESCRIP TI ON QTY KEY NO. PART NO. DESCRIP TION QTY

200 OR91766 LOCK NUT 5/8-18UNF 1 242 SC10722 HANDW HEE L 2

201 OR90235 HEX NUT M6 2 243 OR72942 ELEVATING KNOB ASSY 2

202 OR92137 PAN HD S CR M5x12 3 244 OR91038 KNOB BOLT 2

203 OR91733 BALL BEARING ˄6203 LLB˅ 2 245 OR70157 KNOB END CAP 2

203A SC80351 CIRCLIPS FOR HOLES Ħ40 2 246 OR91046 HANDWHEEL LOCK KNOB 2

204 SC10491 BUSHING 1 247 SC10454 ADJUSTMENT SCR 8

205 SC10492 ARBOR PULLEY 1 248 OR93906 HEX SOC SET SCR W/CUP POINT M5x6 8

206 SC10493 BUSHING 1 249 SC10743 FRONT BRACKET 1

207 SC80323 HEX SOC SET SCR W /CUP P OINT M8x8 2 250 SC80469 PAN HD SCR W /CROSS RECESS M6x25 1

208 SC80104 HEX SOC HD CAP SCR M6x 10 2 251 SC10506 POINTER 1

208A OR90502 LOCK W ASHER M6 2 252 SC10762 BUSHING 1

209 SC10494 ARBOR RAISING SUPPORT BRACKET 1 253 OR90308 HEX SOC SET SCR W/FLAT POINT M8x30 1

210 OR91801 WAVE WASHER 6203 1 254 OR93891 HEX HD SCR M8x 40 1

211 SC10495 SPLITTER MOUNT SUPPORT 1 255 SC10507 SHAFT 1

212 SC10496 FLANGE PLATE 1 256 OR74452 KEY A 6x6x 35 1

213 SC80325 HEX SOC COUNTERSUNK HD SCR M5x12 3 257 OR90307 HEX NUT M8 3

214 OR91824 KEY 5x5x 15 1 258 OR91084 SPECIAL WASHER (8.3x25x3.5) 1

215 SC10497 ARBOR SHAFT 1 259 OR93891 HEX HD SCR M8x40 1

216 OR70400

BLADE (RA-10*3.2*5/ 8-40T-STL) (OD˖10",ID˖
5/8",TEETH :40

)

1 259A SC10508 SHOULDERED SCR 1

217 OR91026 BLADE FLANGE 1 260 SC10509 BAR S UPPORT 1

218 SC10540 BLADE HEX NUT 1 260A SC80104 HEX SOC HD CAP SCR M6x10 2

219 OR73016 HEX SOC BUT HD S CR M6x35 2 261 SC10510 SHOULDERED SCR 1

219A OR90059 FLAT WASHER M6 2 262 SC10511 LINK ROD 1

220 OR91761 HEX SOC HD CAP SCR M8x25 5 263 OR91754 NYLON HEX NUT M6 2

220A OR90248 LOCK W ASHER M8 5 264 SC84303 PIN 8x90 B TYPE 1

220B OR91084 SPECIAL WASHER (8.3x25x3.5) 5 265 SC80706 HEX HD SCR M8x100 1

222 SC10737 REA R BRACKET 1 266 SC10512 MOTOR SUPPORT BRACKET 1

223 OR91821 HEX SOC SE T SCR W/ FLAT POINT M8x20 4 267 SC80323 HEX SOC SET SCR W/CUP POINT M8x8 2

225 OR91766 LOCK NUT 5/8-18UNF 4 268 OR90311 FLAT WASHER M8 2

226 SC10499 REA R TRUNNION 1 269 OR90248 LOCK WA SHER M8 1

227 SC10500 TIE BAR 2 270 OR90307 HEX NUT M8 1

* SC10758 ELEVATING SHAFT ASSY (#228 - #230) 1 271 SC84307 SPLIT PIN 3.2x22 1

228 OR91744 GEAR 1 272 SC10513 BELT 170 J 1

229 OR91792 SPRING PIN Ħ3x 15 1 273 SC80409 HEX SOC SET SCR W/CUP POINT 1/4-20×3/8" 2

230 SC10759 ELEVATING SHAFT 1 274 OR91770 KEY 5x5x36 1

231 OR90232 SPRING PIN Ħ4x20 1 275 SC76014 MOTOR SPEC LABEL(1.75HP) 1

232 OR91740 FIBER W AS HER 3/8" 2 276 SC90011 MOTOR ASSEMBLY 1.75 HP 1

233 SC10501 ECCENTRIC PLUSMINUS SCR 1 276A SC72067 RUN CAPACITOR, 35uF/300V 1

234 OR93906 HEX SOC SE T SCR W/CUP POINT M5x6 1 276B OR70151 START CAPACITOR, 150uF/250V 1

* SC10542 TILT SHAFT ASSY(#235 - #237) 1 276C OR91007M CORD W/FEMALE DISCONNECTOR 1

235 SC85308 CIRCLIPS FOR SHAFT Ħ9 1 277 OR91023 MOTOR PULLEY 1

236 SC10740 SUPPORT BUSHING 1 278 SC10514 FRONT SUPPORT 1

237 SC10742 TILT SHAFT 1 280 SC10515 WRENCH (7/8"x1/2" ) 1

236A SC10741 FLANGE 1 281 SC10516 OPEN END WRENCH 22mm 1

238 OR90232 SPRING PIN Ħ4x 20 1 282 OR90289 ALLEN WRENCH 2.5mm 1

239 SC10502 TILT NUT 1 283 OR90290 ALLEN W RENCH 3mm 1

240 OR91766 LOCK NUT 5/8-18UNF 1 284 OR90291 ALLEN W RENCH 4mm 1

241 SC10760 BUSHING 1 285 OR91728 ALLEN W RENCH 5mm 1

286 OR92172 ALLEN W RENCH 6mm 1

287 OR91808 ALLEN W RENCH 1/8" 1

40

41

KEY
NO.

PART NO. DESCRIPTION QTY KEY NO. PART NO. DESCRIPTION QTY

401 OR90761 PAN HD SCR W/CROSS RECESS M5x10 6 424 OR91787 PAN HD TAP SCR 1/4-20x3/8" 6

402 SC10520 MOTOR COVER 1 425 SC10765 CABINET SIDE PANEL 1

403 SC10212 WARNING LABEL 1 426 OR91787 PAN HD TAP SCR 1/4-20x3/8" 6

404 SC10215 WARNING LABEL 1 427 SC76045 BEVEL SCALE 1

405 SC10763 CABINET ASSY WELDMENT 1 428 OR91106 INSULATOR 1

406 SC10456 END CAP 4 429 OR91775 PAN HD SCR M4x 15 1

407 SC10764 SUPPORT PLATE 2 430 OR90143 FLAT WASHER M4 3

407A OR90761 PAN HD SCR W /CROSS RECESS M5x10 4 431 OR91737 CABLE CLAMP 1

408 OR91134 WRENCH HOOK 1 432 OR90078 HEX NUT M4 1

409 OR91832 TRIANGULAR THREAD TAP SCR M4x8 7 433 OR91497 HEX HD SCR M8x50 2

410 SC10523 CABINET ACCESS DOOR 1 434 OR90311 FLAT WASHER M8 2

411 SC11024 SPEC LABEL for 45950G 1 435 OR91505 CASTER WHEEL 2

411 SC11025 SPEC LABEL for 45950C 1 436 OR91469 FOOT PEDAL 1

412 SC10524 SUPPORT BOARD 1 437 OR91502 HEX HD SCR 5/16-18x4" 1

413 OR90761 PAN HD SCR W/CROSS RECESS M5x10 2 438 OR91508 PIN SHAFT 1

414 OR94428 LOCK NUT M5 2 439 OR91504 FLAT WASHER 1/2" 2

415 SC10525 FIXED BOARD 1 440 OR91507 CIRCLIPS FOR SHAFT 1/2" 2

416 OR91787 PAN HD TAP SCR 1/4-20x3/8" 4 441 OR91506 CASTER ASSY 1

417 OR91135 FENCE BRACKET 2 442 OR72922 REAR WHEEL BRACKET 1

418 OR91787 PAN HD TAP SCR 1/4-20x3/8" 4 443 OR91503 LOCK NUT 5/16-18 1

419 OR91833 PAN HD TAP SCR 1/4-20x1/2" 4 444 OR94775 CARRIAGE BOLT M8x20 2

420 OR91128 DUST PORT 1 445 OR94771 HEX NUT FLANGED M8 2

421 OR70484 NAMEPLATE SCTW LOGO 1 446 SC10548 PUSH STICK 1

421A OR93823 RIVET Ħ2x8 (Fe) 4 447 OR90059 FLA T WASHER M6 2

421B SC10989 BLACK RED COLOUR BAR 1 448 OR90502 LOCK W ASHER M6 2

422 SC10529 LEVELING SCREW 2 449 SC80111 HEX SOC BUT HD SCR M6x16 2

422A OR90307 HEX NUT M8 2 525 S C11026 MANUAL 1

423 OR91124 DUST CHUTE 1