Steel GP9I-6 Specifications Sheet

Page 1
GP9I-6: Genesi 90cm
6 Zone Induction Hob
Introducing the Steel 6 zone induction
cooktop providing a high quality cooking experience with features such as zone free technology, sliding controls and double booster function.
Bevel Edge Finish
Features and Benets:
Warranty 3 Years
High performance, large area zone that gives you the choice of using a larger or square
Zone Free Technology
Touch Control
E󰀩cient Cooktop System
Double Booster Control
Timer
Bridge Function
Black Glass Design
Electronic controls with sensitive touch keys, making it easier and more accurate to control temperatures. This activation is indicated by a control light, letter or number in the display and/or ‘beep’ sound.
Instead of using a ame or a heating element, induction cooktop directly heats cooking
pot, causing very rapid increases in temperature.
Booster (P) and Double Booster ( ıı ¦¦) provide a boost of power to the selected heating
zone. When activated, the heating zones work for 10 minutes with an ultra high power.
Able to be used on all heating zones simultaneously with di󰀨erent time settings (from 0 to
999 minutes) for each heating zone.
Allows the use of 2 cooking zones at the same time (left, middle and right zones) with the same features as a single cooking zone. Booster function not applicable.
Easy to clean and contemporary design makes this hob very desirable for all kitchen designs.
MADE IN ITALY
40-44 Mark Anthony Drive, Dandenong South VIC 3175 Phone: 1300 762 219 Fax: 03 9706 6904 Website: www.arisit.com
Units are designed specically for the Australian market and manufactured in Italy by
dedicated boutique specialist manufacturer.
Distributed by Arisit Pty Ltd
www.steelbrand.com.au
Page 2
GP9I-6: Genesi 90cm
7
80mm
6 Zone Induction Hob
9
0
0m
m
50mm
530mm
7
5
0
m
m
Model GP9I-6
Control Panel Touch Slide
Number of Power Levels 9
Child Safety YES
Total Amps 48 AMPS
Total Power 11 KW
Nominal Power 2100 W
Booster 6 x 2600 W
Double Booster 6 x 3700 W
Minimum Diameter Defection 100mm
Product Dimensions (W) 900mm x (D) 530mm
Depth of unit 48mm + 4mm glass
mm
0
49
Cut Out Product Dimensions (L) 750mm x (D) 490mm
WARNING: Technical specications and product sizes can be varied by the manufacturer, without notice. Cut outs for appliances should only be physical product measurements. The above information is indicative only.
40-44 Mark Anthony Drive, Dandenong South VIC 3175 Phone: 1300 762 219 Fax: 03 9706 6904 Website: www.arisit.com
Distributed by Arisit Pty Ltd
www.steelbrand.com.au
Loading...