Stearns B524 User Manual

OWNER’S MANUAL FOR

STEARNS

®

INFLATABLE KAYAK

™

CORDOVA

IMPORTANT!

BEFORE PROCEEDING

READ THIS MANUAL CAREFULLY

(CONTAINS IMPORTANT SAFETY INFORMATION,

AS WELL AS CARE AND MAINTENANCE)

(B524)

Cordova
(B524)

Stearns®Inc.

St. Cloud, Minnesota 56302 U.S.A.

Phone: [phone] or 1-800-697-5801

Fax: [phone]

www.stearnsinc.com

™

Note: If your state requires this document for licensing your boat, please contact

®

Customer Service Department for completion, or more information.

Stearns

MANUFACTURER’S STATEMENT OF ORIGIN

FOR A VESSEL

SOLD IN THE STATE OF __________________________________

The undersigned manufacturer hereby certifies that the new boat described below, the property of
said manufacturer, has been transferred this ______ day of __________________, 20________ on
Invoice # _______________ to:

Owner’s/Dealer’s Name ______________________________________________________
Address ____________________________________________________________________
City, State, Zip ______________________________________________________________

Model Name Model Year Manufacturer’s Hull Identification #
❑ Cordova (B524)

Type: Kayak
Length Overall: _____ ____
Built for: Pleasure Use

U.S. Coast Guard Capacity Plate Information (where applicable):

Maximum persons capacity in whole persons ___
Maximum weight capacity (persons & gear) __

The manufacturer further certifies that this was the first transfer of such new boat and that all
information given herein is true and accurate to the best of their knowledge

_________________________________________________________________________________
Signature

FOR VALUE RECEIVED, in the amount of $ _____________________________________________,
the undersigned hereby transfers the Certificate of Origin and the boat described therein
to ______________________________________________________________________________
Address __________________________________________________________________________
and certifies that the boat is new and has not been registered in this or any other state; Stearns
warrants the title of said boat at time of delivery, subject only to the liens and encumbrances as set
out below:
Amount of Lien Date To Whom Due Address
_____________ _________ __________________ _______________________________
Dates ____________________ 20 ______, at ______________________ ___________________
_____________________ By: ______________________________________________
Transferrer (Firm name) Sign Here ___________________________ Position __________________
Before me personally appeared ________________________ who by me being duly sworn under
oath says the statements set forth above are true and correct. Subscribed and sworn to me before
this ________ day of ____________________________ 20 ________.

_______________________________ Notary Public Date commission expires ____________
(SEAL)

_________ HIN # _______________________

Hull Material: ________________________
Beam: _ __

1100 Stearns Drive • Sauk Rapids, MN 56379

FIRST ASSIGNMENT

®

also

AD1004

OWNER’S MANUAL FOR STEARNS®INFLATABLE KAYAK

TABLE OF CONTENTS

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2.1 Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

3. Boating Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

3.1 Boating Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3.1.1 Boating Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . .5

3.1.2 Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3.1.3 Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

3.2 Responsibilities of the Operator(s) . . . . . . . . . . . . . . . . . . . . .6

3.3 Restricted Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

4. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

4.1 Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

4.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5. Preparing Your Stearns

5.1 Quick Start to Inflating Your Boat . . . . . . . . . . . . . . . . . . . . . .9

5.2 Knowing Your Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

5.3 Make Sure Bladders Are Aligned . . . . . . . . . . . . . . . . . . . . .10

5.4 Over Inflation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

6. Underway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

6.1 Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

6.2 Transporting, Carrying, and Towing . . . . . . . . . . . . . . . . . . .12

6.3 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6.4 Folding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

7. Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.1 Repairing Small Punctures and Cuts . . . . . . . . . . . . . . . . . .14

7.2 Repairing Pinholes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7.3 Seam Openings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

9. Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

®

Inflatable Kayak . . . . . . . . . . . . . . . . . . . . .8

Stearns

®

Warranty Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

1

Declaration of Conformity

(according to ISO/IEC Guide 22 and EN 45014)

Manufacturer’s Name: Stearns Inc.

Manufacturer’s Address: P. O. Box 1498

declares, that the product:

Product Name: Cordova
Model Number(s): B524

to which this declaration relates, meets the essential health and

safety requirements and is in conformity with the relevant EU Directives

listed below:

General Product Safety Directive

using the relevant section of the following EU standards and other

normative documents:

EN / ISO 6185-1 : 2002

ABYC H28-76

Date: 01/09/04

Paul Ebnet, President

St. Cloud, MN 56302

™

This product complies with European directives for recreational vessels
as published by the International Organization for Standardization
(ISO).

2

1. INTRODUCTION

This manual has been compiled to help you operate your craft with
safety and pleasure. It contains details of the craft, the equipment
supplied or fitted, its systems, and information on its operation and
maintenance. Please read it carefully, and familiarize yourself with the
craft before using it.

If this is your first craft, or you are changing to a type of craft you are
not familiar with, for your own comfort and safety, please ensure that
you obtain handling and operating experience before assuming
command of the craft.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT
OVER TO THE NEW OWNER WHEN YOU SELL THE CRAFT.

2. WARRANTY

Complete and return the Warranty Registration Form found on the back
of this Owner’s Manual.

2.1 MODIFICATIONS

Because of the possibility of interference with the factory design
integrity of the kayak, owner modifications to the kayak are not
recommended.

Unauthorized modifications to the kayak could compromise safety,
design integrity or warranty coverage.

3

3. BOATING SAFETY

This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.

! !

DANGER

Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury or substantial property
damage.

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury or property damage.

Indicates a potentially hazardous situation which, if not avoided,
may result in property damage.

CAUTION

Used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property
damage.

NOTICE

Indicates installation, operation or maintenance information which
is important but not hazard-related.

The precautions listed in this manual and on the craft are not
all-inclusive. If a procedure, method, tool or part is not specifically
recommended, you must satisfy yourself that it is safe for you and
others, and that the craft will not be damaged or made unsafe as a
result of your decision. REMEMBER - always use common sense when
paddling YOUR KAYAK!

4

3.1 Boating Regulations

The U.S. Coast Guard is the authority of the waterways; they are there
to help the boating public. State boating regulations are enforced by
local authorities. You are subject to marine traffic laws and “Rules of the
Road” for both federal and state waterways; you must stop if signaled
to do so by enforcement officers.

There are many pamphlets, prepared by the Coast Guard, available to
you. These pamphlets explain “Rules of the Road,” signal lights, buoys,
safety equipment, international and inland regulations and much more
than is presented in this manual. For more information contact your
local U.S. Coast Guard Unit or call the Coast Guard Customer Info line
at 1-800-368-5647.

3.1.1 Boat Safety Labels

Your kayak is affixed with various safety labels at the time of
manufacture. These labels appear at specific locations on the craft
where safety is of particular concern. Safety labels must remain legible
and should not be removed. If you suspect a label is missing or one
becomes damaged, contact STEARNS

®

at 320-252-1642 or

1-800-697-5801.

3.1.2 Registration

The U.S. Coast Guard requires that all power boats operated on the
navigable waters of the United States must be registered in the state of
main use; also, many States require registration in that state whenever
boating on waters within their state boundary. Always contact your state
boating authorities (and neighboring states) for registration information
on boats.

Once you have been issued a number, it is best to affix it on the boat
by printing it on the material with a permanent ink marker.

3.1.3 Education

This manual is not intended to provide complete training on all aspects
of boat operation. We strongly recommend that all operators of this
boat seek additional training on boat handling and safety, and provide
safety training for all passengers.

5

3.2 RESPONSIBILITIES OF THE OPERATOR(S)

IMPORTANT

Users of this product agree by their use to accept the
inherent risks involved in this water sports activity and
agree to follow all instructions, DANGERS, CAUTIONS, and
WARNINGS carefully before using their STEARNS

●

READ OWNER’S MANUAL: Improper Use May Cause Injury or
Death. Pay close attention to items marked “DANGER,”
“WARNING,” “CAUTION” or “NEVER.”

●

Use the kayak in a SAFE and SOBER manner, taking all
reasonable precautions.

●

Each passenger MUST Wear an approved personal flotation
device (PFD). All safety equipment & PFDs must be in good
condition and suitable for your kayak and passenger use.

●

THIS KAYAK IS NOT A PERSONAL FLOTATION DEVICE.

●

Follow all inflation and care instructions.

●

BE AWARE of local boating regulations and follow them.

●

BE AWARE of your environment, water currents, tides,
weather, traffic and other potential hazards in the water and
surroundings.

●

DO NOT use this kayak UNDER the INFLUENCE of DRUGS or
ALCOHOL.

●

DO NOT use this kayak if you suspect a tear or hole. IT MAY
BE UNSAFE.

●

USE CAUTION when entering or exiting the kayak. Keep your
weight centered and distribute the weight of the gear and
passengers evenly.

●

DO NOT allow children to use this kayak without the
supervision of an adult or someone who is experienced in its
safe use.

●

DO NOT tow this kayak.

●

Seek shelter from open water if there is threat of lightning.

®

kayaks.

3.3 RESTRICTED AREAS

Before kayaking, check with Local, State and Federal authorities to
identify restricted areas. Because of the threat of terrorism, the U.S.
Coast Guard has and will continue to implement strict limits on
watercraft near U.S. Navy and Coast Guard ships and other potential
targets.

6

4. SPECIFICATIONS

MAXIMUM CAPACITIES

1

PERSONS OR

175

LBS.

MANUFACTURER: STEARNS INC., ST. CLOUD, MN, USA 56302
MODEL: B524 - CORDOVA

THIS BOAT COMPLIES WITH NMMA STANDARDS, IN EFFECT

ON THE DATE OF CERTIFICATION.

NATIONAL MARINE MANUFACTURERS ASSN.

355 LBS PERSONS, GEAR

PRESSURE = 1.75 psi

(main chambers)

COMPLIANCE

WITH
ISO 6185-1
TYPE III, A

1

103 kg

+

=

0123

= 0,12 bar (main chambers)

Cordova™(B524)

Dimensions: Length - 10’ 10” (330 cm)

Beam - 30” (76 cm)

Dry Weight: 31 lbs (14 kg)
Max. Persons Capacity: 1 person

Max. Persons & Gear Capacity: 355 lbs (161 kg)
Recommended Pressure:

Main chambers: 1.75 psi (0.12 bar)
Floor chamber: 1.0 psi (0.07 bar)

4.1 CAPACITY

The person/load capacity is determined by the availability of proper
seating on the kayak. Acceptable seating determines the number of
passengers, not the overall load capacity.

Cordova

™

capacity label

Do not exceed the certified maximum capacities under any
circumstances. Overloading will reduce freeboard and increase
the likelihood of swamping, especially in heavy seas. Overloading
causes handling to become sluggish, making it difficult to react
quickly.

!

WARNING

7

4.2 FEATURES

M

A

D

E

IN
I

T
A
L

Y

2000

M

A

D

E

IN
I
T

A
L
Y

2000

Cordova

1. Main chamber valve

2. Carrying/grab handles

3. Floor valve

4. Knuckle abrasion guards

5. Tie down cords

6. Spray deck

7. Chamber access zippers

8. Tie down D-rings

™

3

5

2

1

13

17

11

12

7

16

4

14

5

2

9

6

10

1

12

15

4

8

6

10. Inflatable spray ring

11. Seat

12. Spray deck chambers

13. Cargo area

14. Mesh pocket

15. Concealed pocket

16. Spray deck tensioner

17. Cargo hatch tensioner

9. Adjustable foot rests

5. PREPARING YOUR STEARNS

®

INFLATABLE KAYAK

The STEARNS®Inflatable Kayak is designed for recreational use and
can be used in a number of settings. Every usage has its own set of
required skill levels and dangers. Be sure you are prepared for each
use before attempting it and you understand the inherent dangers.

Inflation Setup

Use a STEARNS
equivalent pump to inflate your boat. Use caution not to over inflate
your boat. (Pump not included)

For proper inflation and safety, the user must make sure that the wall

®

“bellows” style foot pump (Model B502) or

inflation valves are sealed properly.

!

WARNING

NEVER USE COMPRESSORS, CO
NOT OVER-INFLATE THE FLOOR OR THE SIDE CHAMBERS.

OR COMPRESSED AIR. DO

2

8

5.1 QUICK START TO INFLATING YOUR KAYAK

M

A

D

E

IN
I
T

A
L
Y

2000

M

A

D

E

IN

I
T
A
L

Y

2000

4

Follow steps below. If you do not understand or are unfamiliar with the
following quick start steps, refer to the following pages for detailed
explanation.

1. Unfold and lay out kayak on flat, level ground

DO NOT OVER INFLATE FLOOR CHAMBER beyond 1.0 psi or 0.07 bar

2. First inflate floor chamber, inflate to desired skills and effect
(Increased inflation produces better performance, but more
initial instability. Less inflated floor has opposite effect). Do not
over inflate (see page 11)

DO NOT OVER INFLATE MAIN CHAMBERS beyond 1.75 psi or 0.12 bar

3. Partially inflate the inner chamber (inside the seating area) with
the valve adaptor (inside the patch kit). Refer to page 10 for
valve operation.

4. Partially inflate the outer chamber with the valve adaptor, until
the cover shape begins to fill out. The kayak should feel soft or
limp at this point.

5. Next add air to each chamber until most of the wrinkles are gone
and the kayak feels firm to the touch.

6. Inflate spray ring and spray deck chambers orally or with a
pump.

7. Make sure all air valves are closed and screwed down tightly.

Main chambers

Valve adaptor

Pump hose

Valve
adaptor

Spray ring/deck lift chambers

Twist to inflate/deflate

Floor Chamber

To inflate To deflate

9

5.2 KNOWING YOUR VALVES

..

.

Stearns Cordova™kayak uses three types of valves. Type II is used to
inflate the floor chambers, Type III is used on Cordova’s main
chambers, and Type IV is used to fill small chambers such as spray
rings and spray deck chambers.

Type II

To inflate

Welded
Reciprocal

* Type III Deflation Stem can be used in three ways. Press and turn
1/4 in. in either direction to lock in closed(up) position or open(down)
position. Closed position allows one way air flow for inflation. Open
position allows for two way air flow and release until desired effect.

Valve

To deflate

Cap

Cap

Deflation Stem*

Valve adaptor for
Type III valves

Type III

Type IV

Twist to inflate/deflate

5.3 MAKE SURE BLADDERS ARE ALIGNED:

1. Each internal air chamber is aligned in relation to the cover
which can be adjusted by unzipping the access zipper located
behind the seat

If the air chambers are not aligned or centered:

A. Relieve air pressure
B. Unzip the cover
C. Partially inflate
D. Realign air chambers, zip cover and inflate chambers

2. All valves are closed tightly, protective caps are reinstalled

10

5.4 OVER INFLATION

CAUTION

! !

DANGER

CAUTION

Do not over-inflate the kayak. Over-inflation is the primary
cause of leaks. Inflate the kayak until most of the wrinkles in
the fabric are gone and it feels firm to the touch, but do not
exceed 1.75 psi (0.12 bar) in the main air chambers and 1.0 psi
(0.07 bar) in the floor chamber.
Water temperature and weather affect the air pressure in the
boat. In cold weather your kayak will lose some pressure
because the air will contract. If this occurs, you may want to
add more air to improve your boat’s performance. In hot
weather, the air will expand. You must let out some air to
prevent the boat from failing from over pressure. Avoid
exposing your kayak to extreme temperatures (hot or cold).

Check for proper inflation often. Use your thumb to press on the port
(left) and starboard air chambers (right). You should be able to press
down 3/4 in. (19 mm). The chamber should feel firm without too much
resistance.

If you have difficulty achieving 3/4 in. (19 mm), the chamber could be
over inflated.

If you are easily able to press further than 3/4 in. (19 mm), the chamber
could be under inflated.

Before paddling, be sure all the kayak's air chambers are properly
inflated.

DO NOT overload your kayak which exceeds the rating on the
capacity plate. Overloading a kayak can result in loss of
control and an unsafe kayak. If your kayak has no capacity
plate, contact the selling dealer or the manufacturer.

On warm sunny days, keep the kayak either in water or in
shade (if kept inflated on land). This will avoid expanding
chambers due to rise in temperature which can result in seam
tears, delamination, popped I-Beams and pinholes. Also keep
in mind to avoid asphalt, sand, pebbles or concrete in direct
sunlight as they radiate high ground heat.

11

6. UNDERWAY

In all your uses of STEARNS®Inflatable Kayaks, make SAFETY a high
priority. Each person should wear an approved personal flotation
device. Learn about your boating area. Get official information about
the local conditions, tides and currents before kayaking there. Be
careful that you do not overestimate your strength, endurance or skill.
Be careful never to underestimate the forces of nature.

6.1 Before You Start

Be smart when kayaking and using your equipment.

●

Properly inflate your kayak. Do not under or over inflate.
Outside temperatures of air and water will drastically change
the volume inside chambers. Chambers may need to be
adjusted (inflated or deflated) for optimum performance and
safety.

●

Know the conditions of the environment.

●

Tell someone of your travel plans. Check local weather reports
before casting off; do not leave the dock area when strong
winds and electrical storms are in the area or predicted to be in
the area.

●

Secure or store loose items before getting underway.

6.2 Transporting, Carrying and Towing

Your kayak should always be transported dry and in its transporting
(carrying) bag. Dry and clean as much as possible before placing boat
in carrying bag. Once you have reached your destination, or before
long periods of non-use, inflate the kayak and allow it to air dry before
storing.

Use care when transporting or storing to avoid sharp points or edges;
they will damage your kayak. Use the carrying handles to lift your
kayak. Never pull or lift it by the sides or attach any other device to lift
or carry it.

!

WARNING

Do not exceed the maximum recommended load. The total
weight of all persons, gear and fluid capacities must
never exceed the maximum load.

12

6.3 Care and Maintenance

M

A

D

E

IN
I

T
A
L
Y

2000

M

A

D

E

IN
I
T
A

L
Y

2000

The STEARNS®inflatable kayak is made of very durable materials.
However, like anything else, proper care will increase the life of your
kayak. Before storing your kayak, make sure it is clean and completely
dry before you store it in its carrying bag. It should be deflated and kept
out of direct sunlight when stored. Avoid exposure to extreme
temperatures (hot or cold). If your kayak is exposed to freezing
temperatures while storing, allow it to warm before unfolding. If a zipper
is stuck or sticking, do not force it. Use liquid soap and a toothbrush to
lubricate the zipper open. Rinse completely.

Never unzip the chamber covers when the kayak is inflated.

Be sure to rinse your kayak with fresh water after every use in salt
water and allow it to dry thoroughly before storing.

To store your boat:

1. Wash your kayak using a mild soap or detergent. Never use strong
solvents to clean your kayak. Rinse it off with fresh water and allow
it to dry thoroughly before storing.

2. Deflate the kayak. Make sure the valves are open so air can flow
freely. Dry and clean as much as possible before placing kayak in
carrying bag.

3. Fix any punctures before storing your kayak in the carrying bag.

6.4 FOLDING

Folded seat

1. Fold sides to height
of carry bag. Place
seat on top of folds
near front.

2. Fold front (bow) to
edge of cargo area,
fold rear (stern) on
top.

3. Fold over once from
back to front, fit into
its carry bag.

13

7. REPAIRS

A

A

A

A = 1/2 in. (12.7mm)

The STEARNS®Cordova™comes equipped with a repair kit that
includes adhesive and several patches. This can be found in the mesh
pocket and should remain with the boat. Making repairs to the inner
tube of the boat may require unzipping the cover and temporarily
removing the tube. Always make sure the boat is fully deflated before
unzipping the cover. If there is difficulty opening the zipper, refer to the
section “Care and Maintenance.” When the repair has been
completed, be sure the tube is aligned properly in the boat cover and
the zipper is completely closed and appropriately locked.

Figure 9

7.1 Repairing Small Punctures and Cuts

1. Cut a patch which is round or with round corners, at least 1/2 in.
(12.7 mm) larger than the hole or cut.

2. Use water and/or mild soap to clean the area where the patch will
be placed.

3. Make sure all surfaces are dry.

4. Spread a thin layer of glue on both the patch and on the damaged
area and let it sit for three to five minutes or until tacky.

5. Press the patch onto the boat, making sure that no air bubbles form.

6. Apply pressure to the patch by placing weight on it. Do not peel
back to see if adhesive is holding.

7. Do not inflate the boat for at least twelve hours.

7.2 Repairing Pinholes

1. Inflate the kayak. Locate the pinhole by sponging soapy water over
the tube until you see air bubbles.

2. Deflate the kayak. Clean the area around the pinhole and apply a
drop of adhesive to the hole once the area is completely dry.
A patch may not be necessary.

14

7.3 Seam Openings

Seam openings are difficult to repair but can be done with certain seam
repair adhesives. Contact STEARNS
local marine shop.

®

for more information or ask your

8. TROUBLESHOOTING

This chart will help you find and correct minor problems with your
kayak.

Problem Solution

Slow leak. Check valve gaskets and make sure the

Still leaks slowly. Check for pinholes. Read section

cap tether is not interfering with the seal.
The valve gaskets must be closed tightly.

“Repairing Pinholes.”

Air valves don’t align. Let air out of both chambers to allow you to

shift the inner tube to match up with the
valve holes in the cover.

Doesn’t inflate Make sure that the tube is aligned.
completely.

The zipper is stuck. Read “Care and Maintenance” section

(6.3) regarding zippers.

Difficulty draining water. Wipe off excess water with a high absorbing

sponge or towel. Kayak dries much quicker
inflated, and in a well ventilated area. Do
not expose in direct sunlight to dry. Deflate
kayak and briefly hang it from the molded
handles with seat removed and seating
compartment exposed. To avoid mold, do
not pack or fold while boat is damp or wet.

15

9. LIMITED WARRANTY

STEARNS®warrants this product to be free from defects in material or
workmanship for a period of one year from the date of purchase.
Products that prove to be defective under conditions of normal and
proper use during the warranty period because of defective
workmanship or faulty material will be replaced or repaired without
charge. For warranty service, return product to place of purchase.

STEARNS
defect, repair or replace the defective part or entire item, at its option.

This warranty does NOT cover:

Products used for rental, for hire or in professionally guided tours and
other uses not considered normal recreational purposes; punctures,
cuts and abrasions sustained in normal use; items involved in
accidents; items damaged in whitewater mishaps, and other
unreasonable uses or improper storage.

STEARNS
from purchaser, perform its responsibilities in conformance with this
warranty.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE
DESCRIPTION OF THE FACE HEREOF. STEARNS SHALL NOT BE
HELD LIABLE FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES.

THIS WARRANTY IS INCLUSIVE IN LIEU OF ALL OTHER
WARRANTIES.

This warranty gives you specific legal rights and you may also have
other rights that vary from state to state.

®

shall inspect all warranty claims and in the event of a

®

shall within (30) days from receipt of an authorized return

Stearns

®

1100 Stearns Drive

Sauk Rapids, MN 56379

USA

320-252-1642

www.stearnsinc.com

16

STEARNS®WARRANTY REGISTRATION

(PLEASE TYPE OR PRINT CLEARLY)

Please complete and mail this card to Stearns within 10 days. It will
register your product in case you ever lose your proof of purchase
information.

Owner’s Name _____________________________________________

Address __________________________________________________

City _________________ State_______ Zip________ Country_______

Model #

❑ Cordova

H.I.N. # ______________________

Purchase Date _____________________________________________

Dealer’s Name _____________________________________________

Address __________________________________________________

City _________________ State_______ Zip________ Country_______

Thank you for responding to the following:

1. How did you first learn of this product?

_____ Dealer _____ Friend _____ Magazine _____ Radio
_____ TV _____ Catalog _____ Internet _____ Other

2. What most influenced your decision to purchase this product?

_____ Price ______ Features ______ Stearns’ reputation
_____ Quality ______ Other

™

(B524)

3. Do you own other Stearns products?

______Yes ______ No

If yes,

______ Watersports Products

®

______ Stearns Outdoors

______ Mad Dog Gear

Products

®

Products

17

BUSINESS REPLY MAIL

FIRST CLASS PERMIT NO. 558 ST. CLOUD, MINNESOTA

POSTAGE WILL BE PAID BY ADDRESSEE

STEARNS INC
PO BOX 1498
ST. CLOUD, MN 56302-9743

NO POSTAGE

NECESSARY

IF MAILED

IN THE

UNITED STATES