Steam-e Gum Remover Operating Instructions Manual
Page 1 of 19
Gum Remover
Operating Instructions
March 2017
Page 2 of 19
REGISTER YOUR MACHINE
Register Your Machine
Model:
Steam-e Gum Remover
Date of Purchase:
Serial Number:
S T - . .
Purchased From:
Address:
Phone Number:
Owner representative:
12 month warranty registration
Thank you for purchasing a Steam-e® product. Warranty registration is quick and easy. Your
registration will allow us to serve you better over the lifetime of the product.
To register your product, send the above information to:
warranty@steam-e.com
For immediate assistance:
+44 (0)7572 428791
Page 3 of 19
TABLE OF CONTENTS
General:
Register your machine
2
Table of Contents
3
How to Use This Manual
4
Hazard Intensity Levels
4
Safety:
Safety Labels
5
Important Safety Instructions
6
Operations:
Technical Specifications
8
Dimensions
8
How the Machine Works
9
Lithium Ion Battery
9
Main Components
10
Step 1 – Pre-run set up
11
Step 2 – Assemble the heating assembly
11
Step 3 – Attach a brush to the nozzle
11
Step 4 – Add the Gum Removal Solution
12
Step 5 – Start the machine
12
Step 6 – Remove the gum
12
Step 7 – Agitate the gum with the brush
13
Step 8 – Turn off the machine
13
Maintenance:
Warning Indicators
14
Descaling
14
Troubleshooting
15
Consumables
16
Terms Conditions and Warranty
Terms and Conditions
17
Warranty
19
Page 4 of 19
HOW TO USE THIS MANUAL
How to Use This Manual:
This manual contains the following sections:
• Safety
• Operations
• Maintenance
The SAFETY section contains important
information regarding hazardous or unsafe
practices of the machine. Levels of hazards
are identified that could result in product
damage, personal injury or severe injury
resulting in the death.
The OPERATIONS section is to familiarise the
operator with the operation and function of the
machine.
The MAINTENANCE section contains
preventative maintenance information to keep
the machine and its components in good
working condition. They are listed in this
general order:
• Warning indicators
• Troubleshooting
Hazard Intensity Level
There are three levels of hazard intensity identified by signal words – WARNING, CAUTION and FOR
SAFETY. The level of hazard intensity is determined by the following definitions:
WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION – Hazards or unsafe practice which could result in minor personal injury or product or
property damage.
FOR SAFETY: To identify actions which must be followed for safe operation of equipment.
Page 5 of 19
SAFETY
Safety Labels
Note: These drawings indicate the location of safety labels on the machine.
Page 6 of 19
SAFETY
Important Safety Instructions
When using this machine, basic precaution
must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
• Do not allow children to operate this appliance or use as a toy.
• Do not use for any purpose other than described in the user’s guide.
• Use only manufacture’s recommended attachments.
• Accessible parts and the steam may become very hot. Keep children and animals away.
• Do not use this appliance if it is leaking, seals are worn, damaged or it does not appear to
be operating properly.
• This appliance must only be serviced, maintained or fixed by authorised people.
• Always keep the nozzle in a downward facing direction when operating to ensure no hot
liquid or steam can cause harm to the operator or bystanders.
• Only Steam-e® approved gum removal solution and brushes can be used in this appliance.
• Pay attention to any of the warning indicators
• When transporting, moving or storing the appliance the battery must be disconnected and
removed from the machine and the reservoir must be emptied.
• Although the machine is water resistant, make sure that it is kept dry at all times.
• Do not touch the brush, nozzle or steam during the machine’s operation.
• Only change brushes when the machine is off and cool enough to touch safely.
• Always make sure that the machine is started in the ‘R’ or ‘Rinse’ position.
READ AND SAVE THESE INSTRUCTIONS
Loading...