Steam2Care MT-600 User Manual

~f

STEAM+XWiiN

MT-600

TENS/EMS

Electronic Pulse Massager

USER

MANUAL

Thank

You

for

Choosing

MT-600

Electronic Pulse

Massager

MT-600 Electronic Pulse Massager

is

a convenient and effective

device

to

help relieving pain

without

the

use

of

drugs. Combing

both therapeutic methods ofTENS and

EMS

in one unit,

it

can

be used

for

chronic nerve and muscle pain relief, massage,

as

well

as

muscle stimulation.

The device

is

extremely easy

to

operate.

15

therapeutic modes

are pre-programmed

to

simplify

the

setup procedure.

Each

mode

is

specially designed according

to

research

to

effectively

target different parts

of

the

body,

or

simulate different massage

techniques.

On

the

safety aspect, MT-600 offers a unique

Auto

Safety feature

that

will automatically cut

off

the

output

pulse when electrode

pads are

not

making proper contact. Medical grade connecting

wires are

also used

to

prevent electrical leaks.

MT-600

is

also very reliable. With proper care and usage,

it

will

bring you many years

of

comfort

and well-being.

We

hope you will enjoy using this

product

and sincerely wish

you a great

health.

For

more

product

information,

Please

visit

us

at steam2care.com

About

TENS

and

EMS

TENS

(Transcutaneous Electrical Nerve Stimulation)

is

used by

delivering stimulating pulses across

the

surface

of

the

skin and

along

the

nerve strands. The stimulating pulses help

to

relief

pain

by

preventing pain signals

from

reaching

the

brain.

It also help stimulate

your

body

to

produce higher levels

of

Endorphins (your body's natural painkiller).

EMS

(Electrical Muscle Stimulation)

is

used effectively

to

prevent,

or

reduce muscle atrophy which

commonly

occurs

after injuries

or

surgeries.

EMS

also helps

by

increasing blood

flow

to

muscles, range

of

motion,

muscle strength,

as

well

as

enhancing muscle endurance. It also helps

to

relief muscle

related

pain, such

as

spastic muscle, sore muscle and

tight

muscles

Both methods have been proven

to

be

an

effective pain

therapy

option

to

help

ease

the

effects

of

acute

or

chronic pain.

Package Content

1 x-MT-600 Device Unit
2x-

Electrode

Pad

Wires

(1

wire per channel)

4x-

Electrode

Pads

(2

pads per wire)

1

x-

Belt clip

3x-

AAA batteries

1

x-

User Manual

Buttons and Functions

LCD

Display Screen

Channel

Output

Port

Screen Display Indications

Pre-Programmed Modes l

1

Countdown

1 Timer

@![Lj@

NECK

BACK

ffi

WAIST

HIP

HAND

\..:J

ELBW

WRST

KNEE

PAUSE

3D

MUSCL

ANKL

FEET

KNEAD

TAP

CH

'"

~

(j)

fLf

Intensity Setting

_j

J

ofChannel1

Battery

Level

RNDM

nO

CH

®

'"

fLf

L Intensity Setting

ofChannel2

15

Pre-Programmed Modes

SHLDR

Shoulder

WRST

Wrist

NECK

Neck

KNEE

Knee

BACK

Back

MUSCL Muscle

WAIST Waist

ANKL Ankel

HIP Hip

FEET

Feet

HAND Hand

KNEAD Knead

ELBW

Elbow

TAP

Tap

RNDM Random

How

to

Use

0 Install 3 AAA batteries

into

the

device. Do

not

power

ON

yet.

e Connect

the

Electrode

Pad

Wire

to

the

Channel

Output

port.

0
0

0

G

0

If

you are using

just

one channel,

do

not

connect

the

second

Electrode

Pad

Wire.

Adhere

the

electrode pads

firmly

to

the

skin

of

the

area

you

are treating.

Turn

the

power

ON

by

pressing

the

ON/OFF

button.

Press

the

Mode Selection

button

to

choose

the

mode

you

desire.

The

Intensity Setting

on

the

display screen should read Zero

(0)

initially.

Press

the

Intensity Increase(+)

button

of

the

connected channel.

Each

press on

the

button

will increase

the

intensity

by

1.

Set

it

to

the

level you are comfortable with.

Press

the

Timer

button

to

adjust

the

duration

time

(in minutes)

of

your

therapy session. The default

time

is

30 minutes.

Each

press will increase

the

duration

time

by

5 minutes.

To

decrease

the

Intensity Setting, press

the

Intensity Decrease

(-)

button.

Each

press will decrease

the

intensity

by

1.

()

If

no

button

is

pressed in 5 seconds,

the

Auto

Keylock will be

activated. Some buttons are

locked

to

prevent

your

settings

from

being altered accidentally.

To

disengage, press and hold

the

Intensity Decrease(-)

button

for

3 seconds.

How

to

Use

(continued)

«!)

If

Mode

is

changed

during

the

therapy session, all Intensity

setting will resume back

to

zero

(0)

for safety.

You

will need

to

set

the

intensity again.

Tips and Device Care

High intensity settings are

not

necessarily more effective.

We

recommend setting

the

intensity level you are most comfortable

with,

or

start

with

a lower intensity for a

few

sessions first before

increasing.

If

you should feel stinging

on

your

skin,

it

could be an indication

that

the

electrode pads are

not

properly adhered

to

your

skin.

It

occurs when

the

electrode pads are drying out,

or

your

skin

is

dry

(especially

during

winter).

In

such event,

we

recommend

wiping

your

skin

with a wet

towel first before applying

the

electrode pads.

Also, in some cases, electorde pads

might

not

attach well

on

hairy skin

or

skin

with

excessive oil.

Electrode

pads need

to

be replaced over a period

of

time.

To

extend

the

life

of

electrode pads, you can

try

rising

it

under

tap

water and

let

it

dry.

If

you are finished using

the

device, please always adhere

the

pads back

to

the

small square plastic sheets

that

were

on

the

electrode pads originally. Always keep

the

adhesive side clean.

If

you plan

not

to

use

the

device

for

an

extended period

of

time,

please always

remove

the

batteries

to

prevent acid leaks

from

the

battery, resulting damage

to

the

device.

Auto Safety Feature

MT-600

is

equipped

with

Auto Safety Feature which cuts

off

both

channels'

output

pulse automatically once

it

detects

the

electrode pads are

not

making proper contacts

to

your

skin.

It

will stop

the

device automatically and resume all intensity

settings back

to

zero

(0)

to

prevent discomfort or shock.

In such event, you should check

if

any electrode pads are

not

properly adhere

to

your

skin.

You

can

also

try

rinsing

the

adhesive side

of

the

electrode pads under

tap

water or

wipe

your

skin

with a wet

towel.

If

not

improved,

it

could be

the

time

to

replace

your

electrode pads.

Important

Safety Warning

This device

is

for external use only. Do

not

use

this device

on

eyes,

throat,

front

of

the

neck, broken or irritated skin,

numb

skin, cancerous (malignant) tissue, spinal column,

through

chest using anterior and posterior position, head

or

any area

that

causes current

to

flow

transcerebrally. Stop using this

device

immediately at any sign

of

discomfort. Please consult

your

physician before use

if

you are suffering from any disease,

such

as

acute disease, metastatic disease, heart disease,

or

with

implanted devices and etc., on any person

with

epilepsy,

or

in

pregnancy.

Do

not

use

this device while driving, operating any machinery,

close

to

water

or

any environment

that

may endanger

the

user.

Keep

out

the

reach

of

children