Steadicam AERO Specifications

Maximum Camera &

Accessory Weight:

The maximum amount of weight from the camera and
camera operating accessories the sled can withstand.
Note that maximum paylod is dependent on arm used.

Number of Post Sections:

The standard and optional number of post sections
available with the product.

Minimum Sled Length:

Distance between the top of the camera plate and the
bottom of the sled base with no post extension.

Maximum Sled Length:

Distance between the top of the camera plate and the
bottom of the sled base with full post extension.

Product Weight:

The weight of the sled alone
(Dovetail Included, no balance weights, monitor, cables or
batteries mounted).

Tool-free Operation:

Adjustable without the use of tools.

2-Pin P-Tap 12V nominal

75Ω BNC HD Compatible

3-pin Mini XLR

Battery Input Power
Protected by 5A Thermally resetting
Fuse.
Pin 1 = GND
Pin 2 = 12V
Pin 3 = nc

3-pin Mini XLR

Monitor Output Power
12V nominal
Pin 1 = GND
Pin 2 = 12V
Pin 3 = nc

75Ω BNC HD Compatible

G-70x:

Yes Requires 1/2" arm post adapter

G-50x:

Yes Requires 1/2" arm post adapter

A-30 Arm:

Yes

A-15 Arm:

Yes

Exovest:

Yes Socketblock arm dependent

U2 Vest:

Yes Socketblock arm dependent

A-30 Vest:

Yes Socketblock arm dependent

A-15 Vest:

Yes Socketblock arm dependent

Standard Monitor:

Requires 2 x Batteries for operation

Stage Connectors:

Base Connectors:

Battery Mount:

SONY BP-U

CANON LP-E6

Note:

- Battery voltage can range from approximately 11-17Vdc.
For those battey mounts that require 2x DV batteries, 12V
is derived from those 2 batteries connected in Series.

- All loads combined not to exceed 5A Max.

BATTERY

ANTON-BAUER, WITH D-TAP

Standard

2

22.5 in / 57.2 cm

35.5 in / 90.2 cm

5lbs / 2.3 kg

Yes/No

7" HD-SDI/SD/HDMI

1000 NIT

PRODUCT SPECIFICATIONS

V-LOCK, WITH D-TAP

SPECIFICATION NOTES:

PRODUCT: STEADICAM AERO

ESSENTIAL SPECIFICATIONS

20 lbs / 9Kg

ARM COMPATIBILITY
ELECTRONIC SPECIFICATIONS

VEST COMPATIBILITY

PRODUCT MONITOR OPTIONS

Notes:

Requires 2 x Batteries for operation

Requires 2 x Batteries for operation

Docking Bracket:

Standard/Optional/Selectable: Whether the product comes
standard with a certain docking bracket, if it is an
optionally included accessory, or if there are multiple
docking bracket options to choose from for inclusion with
product.

Carrying Case:

Standard/Optional/Selectable: Whether the product comes
standard with a carrying case, if it is an optionally included
accessory, or if there are multiple case options to choose
from for inclusion with product.

Optional Accessory (part number, price & specs not yet
released)

Cables:

BNC Video Cable

Standard with all AERO offerings except for Sled Only (no
monitor) Option

Battery Mount:

1/2" Basic Docking Bracket = Standard with AERO-15 //
1/2" Deluxe Docking Bracket = Standard with AERO-30 //
Sled Only Product Offerings = Option Selectable Docking
Bracket

3-Pin Mini XLR Monitor Cable

SONY NP-F970

ESSENTIAL ACCESSORIES

PANASONIC D28

Steadicam is a registered trademark of The Tiffen Company.
Steadicam AERO is a trademark of The Tiffen Company.

All other trademarks are the property of their respective owners.

Specifications subject to change without notice.

90 Oser Avenue

Hauppauge, NY 11788

1(800) 645-2522

www.tiffen.com