Staub Electronics WB-600-IPVCE-12 User Manual
KEY FEATURES
L
I
F
E
T
I
M
E
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
SURGE
PROTECTOR
FILTER3FILTER2FILTER1
CONTROLLED 1ALWAYS ON 1
SAFEVOLTAGE
AUTOREBOOT
SYSTEMSTATUS
INTERNET
PROTECTED
GROUNDED
GROUND
LUG
IN
OUT OUT
IN
NETWORK
SAFEVOLTAGE
ON OFF
WB-600-IPVCE-12
ALWAYS ON 3
ALWAYS ON 2 ALWAYS ON 4 CONTROLLED2
CONTROLLED 3
CONTROLLED 4
CONTROLLED 5
CONTROLLED 6
CONTROLLED 7
CONTROLLED 8
RESET
TM
™
OWNERS MANUAL
WB-600-IPVCE-12
$50,000
See Specifications for Individual Amounts
Surge Protection with Fireproof MOVs – Advanced Ceramic
MOV technology reduces risk of re from surges.
Surge Disconnect – In the event of a catastrophic surge event,
the WattBox™ component will sacrice itself and permanently
disconnect AC Power.
Safe Voltage Monitoring – WattBox™ components equipped
with Safe Voltage Monitoring will automatically disconnect system
equipment from harmful over and under voltages. When the Input
voltage returns to a safe level, the equipment will be reconnected.
Sequential Power – Protects against harmful speaker pop and
blown circuits by sequentially turning equipment on and off
(WB-600-IPVCE-12)
Noise Filtration – Eliminates AC noise to improve picture and
sound quality.
Isolated Filtration Banks – (Bank 3) Outlet banks are isolated
from one another to prevent cross contamination between compo-
nents.
High Current Outlets – Designed for equipment with high current
demands such as ampliers and subwoofers.
Flexible Power Cord – WattBox™ power cords are both exible
and durable, and designed for ease of installation.
Secondary Protection –Protected 3 GHz signal coax/satellite
connections plus Ethernet / Telephone connections.
Flexible Mounting – WattBox™ exible mounting options allows
vertical, horizontal or angled mounting. Mounts ush with back of
the rack and allows the installer to easily reach outlets. Hardware
is included to mount to the wall or back of a cabinet.
See Mounting Options on Pg. 5
Modular Display – Mount the display anywhere in the rack. The
WB-600-FP faceplate allows you to put the display at the top and
the outlets at the bottom of the rack.
(Sold Separately)
IP Control – Provides control of outlets over an IP network. Cycle
outlet state, turn outlets On or Off through a web browser.
Auto Reboot – Monitors network activity and resets power to
outlets when programmable conditions are met.
Outlet Control Scheduling – Congure outlets to turn Off or On at
a specic date or time.
System Notications – Programmable email notications keep
you informed of System Status Changes.
WELCOME TO WATTBOX™
WattBox™ power products are designed specically to provide customers with advanced protection for their valuable electronics and
Custom Integrators with maximum exibility for installation. With this IP-enabled power conditioner, both service calls and system downtime are reduced, and the self-healing Auto Reboot feature automatically resets components that become unresponsive on the network.
Plus you get a host of remote access features to monitor and control individual outlets – even receive email notications that keep you
informed about the system’s status.
Rest assured that WattBox™ products will deliver the protection and safety for your customers’ needs. All WattBox™ products are UL
certied and built with the highest quality components available such as Fireproof MOVs. Whether in a rack, a structured wiring en-
closure or behind a flat screen, the versatile mounting options allows simple installation of WattBox™ for easily managing power
cords, adapters and signal cables. WattBox™ is the ideal choice for Custom Integrators who demand reliability, safety, and exibility
when installing power products for their valued customers
WATTBOX™ 600 SERIES Installation and Users Manual
FILTER3FILTER 2FILTER1
CONTROLLED 1ALWAYS ON 1
SAFEVOLTAGE
AUTOREBOOT
SYSTEMSTATUS
INTERNET
PROTECTED
GROUNDED
GROUND
LUG
IN
OUT OUT
IN
NETWORK
SAFEVOLTAGE
ON OFF
WB-600-IPVCE-12
ALWAYS ON 3
ALWAYS ON 2 ALWAYS ON 4 CONTROLLED 2
CONTROLLED 3
CONTROLLED 4
CONTROLLED 5
CONTROLLED 6
CONTROLLED 7
CONTROLLED 8
RESET
TM
PACKAGE CONTENTS
(1) WB-600-IPVCE-12
(1) 6ft Power Cord
(2) Small Rack Mounting Brackets
(2) Large Rack Mounting Brackets
(8) Mounting Bracket Screws
REAR PANEL
(4) Rubber Feet
(2) Sheets of Power Cord Labels (16 total labels)
(1) Owner’s Manual
(1) DVD Rom Containing Support Documents and WattBox™ Utility Software
(4) Screws, Washers, and Anchors
(6) Power Adapter Hook & Loop Tie Down Straps
2 3 41
5 6 7 8
10 12 13 14 17 18 19
119
15 16
1. Ground Lug
2. RJ45 Network Connection (For IP Control)
3. Ground indicator LED
4. Surge Protection indicator LED
5. Safe Voltage Indicator LED
6. Auto Reboot Enabled Indicator LED
7. System Status Indicator LED
8. Internet Activity Indicator LED
9. Hook & Loop Strap Lockdown – See Securing Power Adapters on Pg. 7
10. Outlets 1 – 4 – Unswitched (Always On) Isolated Filter for video/network components
11. Power Indicators for Outlets 1-12 – Illuminates when power is ON (x12 – 1 for each outlet)
12. Outlets 5 -8 – Switched (IP Controlled) Isolated lter for audio/auxiliary
13. Outlets 9 – 12 – Delayed (IP Controlled) Isolated Filter for high current components
14. Protected 3GHz coax connections for cable/satellite
15. Protected connections for Ethernet / Telephone
16. Safe voltage switch – Disables Safe Voltage Feature
17. Detachable power cord outlet with locking clip
18. 15 Amp resettable circuit breaker
19. AC Power switch
pg.2
PROTECTED
AUTO REBOOT
SYSTEM STATUS
INTERNET
POWER
WB-400-IPCE-8
TM
INTERNET
POWER
WB-400-IPCE-8
SYSTEM STATUS
INTERNET
POWER
WB-400-IPCE-8
TM
AUTO REBOOT
SYSTEM STATUS
INTERNET
POWER
WB-400-IPCE-8
TM
AUTO REBOOT
SYSTEM STATUS
INTERNET
WB-600-IPVCE-12
TM
FRONT PANEL
DI SPLAY LINK
1
2
1. Outlet – Supplies power to the WB-600-FP (Sold Separately)
2. Display Link – Data connection to WB-600-FP (Sold Separately)
WATTBOX™ 600 SERIES Installation and Users Manual
LED OPERATION
© 2012 Wattbox
INTERNET
SYSTEM STATUS
AUTO REBOOT
SAFE VOLTAGE
PROTECTED
GROUNDED
™
Green (Solid): All sites/IP Addresses are communicating with the WattBox
Green (Flashing):
At least 1 (not all) Sites/IP Addresses are communicating with the
WattBox
Red (Solid): None of the Sites/IP Addresses are communicating with the WattBox.
Green (Solid):
Green (Flashing):
Red (Solid):
WattBox processor is in an operating state and can be accessed via the
WattBox interface
Firmware for the WattBox processor is being updated, during this state
the WattBox cannot be accessed via the WattBox interface.
WattBox processor is NOT in an operating state, reset button must be
pressed to return the WattBox to an operating state.
Auto Reboot is Enabled, WattBox will perform power cycle for outlets that
When Illuminated:
are ON when communication with the assigned Website/IP Address is lost.
Note that outlets that are OFF, will not power cycle.
When Not
Illuminated:
Green (Solid):
Auto Reboot is Disabled, no power cycle will occur when communication
with the assigned Website/IP Address is lost.
The current incoming AC voltage is safe for operation, all outlets with
receive power.
Unit is verifying incoming AC voltage, occurs at WattBox power up or
Green (Flashing):
Red (Solid):
Green (Solid): The WattBox is powered on and outlets are protected.
Off:
Green (Solid): Incoming AC outlet is grounded.
Off:
when incoming voltage returns to a safe condition after unsafe voltage
was detected.
Incoming AC voltage is NOT safe, the WattBox outlets will be off until a
safe incoming AC voltage is detected.
The WattBox is not powered on, or the MOVs have opened removing
power from the outlets.
Incoming AC outlet is not grounded and requires inspection by an
electrician.
pg.3
WATTBOX™ 600 SERIES Installation and Users Manual
MOUNTING OPTIONS
The Wattbox™ 600 Series is designed for standard 19” equipment racks and features versatile mounting options. The multi-position
bracket allows vertical, horizontal or angled mounting. The unit can also be mounted ush with the rack or set back to the most
convenient position for a particular installation.
Attach the brackets to the Wattbox™ in the position desired. Install the Wattbox™ using supplied hardware.
Small Bracket Mounting
Screw Position
Large Bracket Options
Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position
90.0°
0.0°
Screw Position
Wall Mounting
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
USE CENTER HOLES FOR ANGLED MOUNTING
Screw Position Screw Position
USE CENTER HOLES FOR ANGLED MOUNTING
USE CENTER HOLES FOR ANGLED MOUNTING
pg.4
Screw Position
90.0°
45.0°
0.0°
Loading...