Staub Electronics SM-SBAR-BKT User Manual

OWNER’S MANUAL

SM-SBAR-BKT

>>

SOUNDBAR DISPLAY

MOUNT ADAPTER

SM-SBAR-BKT Assembly Manual

Soundbar

DisplayDisplay

Soundbar

Display

Soundbar

Soundbar

Display

Soundbar

Display

Display

Soundbar

Display

Soundbar

0.75in. (0.75 in.)

5.51in. (5.51 in.)

1.89in. (1.89 in.)

0.75in. (0.75 in.)

0.27in. (0.27 in.)

ADJUSTING THE BRAKCET

The SM-SBAR-BKT can be adjusted to allow for the desired positioning of a soundbar for depth
and height relative to the display. This is achieved by a sliding Tray bracket and by changing the
orientation of the Hook bracket.

NOTE: This Strong™ bracket has been designed to work with any Episode® Soundbar products
but can be used with any other manufacturers’ models.

DEPTH ADJUSTMENTS

HEIGHT ADJUSTMENTS

pg.2

SM-SBAR-BKT Assembly Manual

ASSEMBLY STEPS

1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the
display and the wall mount.

NOTE: On larger displays only the bottom screw will be used.

2. Insert the Tray brackets into the rear of the Hook Brackets.

Keep the set screws loose to allow for adjusting the depth of the
soundbar once installed in step 3.

3. Cut the provided Trim piece to the width of the attached

sound bar.

4. Secure the Trim piece to the soundbar via the adhesive on

the Trim piece.

© 2012 STRONG

pg.3

SM-SBAR-BKT Assembly Manual

Set Screw

5. Attach the Soundbar to the installed Tray
brackets and secure with the screws provided
with the ES-300-SNDBAR.

6. Adjust the soundbar to the desired depth in
relation to the display.

7. Tighten the set screw for each tray bracket. If
using a non Episode™ soundbar, verify that
screws have been provided by the manufacturer.

LIFETIME LIMITED WARRANTY

All Strong™ products have a Lifetime Limited Warranty. This warranty includes
parts and labor repairs on all components found to be defective in material or

Lifetime

workmanship under normal conditions of use. This warranty shall not apply to

products which have been abused, modied or disassembled. Products to be

repaired under this warranty must be returned to SnapAV or a designated service

center with prior notication and an assigned return authorization number (RA).

For Technical Support : 1.866.838.5052

120130

© 2012 STRONG