Status Pro T250 Instruction Manual

T250

Laser transmitter

Instruction manual

Another fine solution by

T250

Instruction manual – English

CONTENTS

Laser transmitter T250
(SP T250-P)

We would like to congratulate you on the purchase of your Status Pro R310 Laser receiver.
Before initial usage you should carefully read the safety instructions as well as the user
guidelines contained in this manual. We wish you every success when using this
Measurement Instrument.
Please note: User Manuals can be amended when improvements or changes to the prouct
range have been carried out. Use the link below to make sure you have the most up to
date version of your User Manual. www.statuspro.com/machine_geometry/documents/

Contents

1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Class of laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3 Instrument care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.6 Liability Exclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.2 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3. OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1 Aligning the laser beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.2 Setting up the T250 for straightness measurements . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4. TECHNICAL DETAILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6. PRODUCTS AND SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2

Status Pro – T250 Instruction manual

SAFETY INSTRUCTIONS

1. Safety Instructions

1.1 Class of Laser

The laser light emitted from a Status Pro Laser has an Output Rating of < 1,0 mW.
The Laser is placed in the category „Class 2“ and is classified as safe for the use as a
Measurement instrument. There are however a few safety aspects to be observed:

Caution!

• Do not stare into the laser beam.

• Do not point the laser beam at other people.

• Observe the local safety guidelines on Site and if in doubt consult

the Site safety Engineer.

• Do not use the equipmentin damp or moist locations.

• Ensure shading of the equipment against direct sunlight or heat

sources.

• Fluids or rain as well as extreme temperature conditions may

damage the equipment.

Note

Do not violently shake the Laser or other sensors and always
protect against falls. This can damage the structure or the optics
of the instrument resulting in false measurements.
Do not touch rotating parts when in use!

Status Pro – T250 Instruction manual

3

T250

1.2 Standards

All Status Pro Laser and Receiver Instruments are developed and manufactured
according to the following CE Standards:

• EN 55 011

• EN 55 022

• EN 61 000-4-2

• EN 61 000-4-3

• EN 60 335

1.3 Instrument care

Your measurement instrument is designed for use in an industrial environmentand can
withstand water splashes or light spray as well as dust. Clean the equipment using a soft
cotton cloth and a mild soap solution. Laser apertures as well as well as sensor areas
should only be cleaned using a soft, dry and dust-free cloth. Do not use paper towels to
clean glass surfaces as they could scratch. Avoid contact with grease, oil or oil-based
solutions when handling the equipment..

SAFETY INSTRUCTIONS

1.4 Maintenance

The mechanical components of your equipment are prone to natural wear and tear! If the
Instrument appears to have a technical defect, contact the Manufacturer. Das Gerät nicht
eigenständig öffnen. Attempted repairs through unauthorised personnel makes the gua­rantee null and void!
Always store the equipment under dry conditions and use the case for transportation.

Note

To be able to identify the equipment when seeking advice always
quote the serial number of the equipment. The Manufacturer does
not accept any responsibility for damage incurred through incorrect
maintenance carried out by non-authorised personnel.

4

Status Pro – T250 Instruction manual

SAFETY INSTRUCTIONS

1.5 Calibration

To guarantee measurement accuracy, and reliable operation of your
Status Pro Measure ment System, it is of utmost importance that the
recommended Service Intervals be ad hered to. The System should be
checked for serviceability, and recalibrated by the Status Pro workshops
every 12 months.

Within the scope of the service checks, the complete system will also be examined for
possible wear or damage, as well as receiving any software updates. The date of the next
service check for your equipment is stamped on the Status Pro calibration sticker.

To ensure trouble-free processing of the service and calibration checks, simply use
the form you will find using the following link:

www.statuspro.com/machine_geometry/service_support/calibration_repair/

1.6 Liability Exclusion

The Status Pro GmbH does not accept responsibility for damage incurred through incor­rect use or handling of the equipment. To ensure correct usage, a founded knowledge of
the equipment is essential. It is of the utmost importance that you read and understand the
Handbook!

No responsibility will be accepted for damage incurred through ignorance or disregarding
of the operating instructions.

Status Pro – T250 Instruction manual

5