
Revision Date: 29-Jan-2015 Version 1
_____________________________________________________________________________________________
AF-5500 Anti Static Floor Finish
Other means of identification
Recommended use of the chemical and restrictions on use
Floor finish/floor coating.
Details of the supplier of the safety data sheet
Supplier Address
Static Solutions
43 Broad Street
Hudson, MA 01749
Emergency Telephone Number
Phone: 978-310-7251
Fax: 978-310-7146
Emergency Telephone (24 hr)
INFOTRAC 1-352-323-3500 (International)
1-800-535-5053 (North America)
2. HAZARDS IDENTIFICATION
Physical State Liquid Odor Mild
Skin corrosion/irritation
Serious eye damage/eye irritation
Causes skin irritation
Causes serious eye irritation
Suspected of damaging fertility or the unborn child
Precautionary Statements - Prevention
Obtain special instructions before use
Do not handle until all safety precautions have been read and understood
Use personal protective equipment as required
Wash face, hands and any exposed skin thoroughly after handling
Wear eye/face protection

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Precautionary Statements - Response
If exposed or concerned: Get medical advice/attention
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
If eye irritation persists: Get medical advice/attention
IF ON SKIN: Wash with plenty of soap and water
Take off contaminated clothing and wash it before reuse
If skin irritation occurs: Get medical advice/attention
Precautionary Statements - Storage
Precautionary Statements - Disposal
Dispose of contents/container to an approved waste disposal plant
Toxic to aquatic life with long lasting effects
3. COMPOSITION/INFORMATION ON INGREDIENTS
Diethylene glycol monomethyl ether
**If Chemical Name/CAS No is "proprietary" and/or Weight-% is listed as a range, the specific chemical identity and/or percentage
of composition has been withheld as a trade secret.**
First Aid Measures
General Advice
If exposed or concerned: Get medical advice/attention.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and
easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Wash with plenty of soap and water. Take off contaminated clothing and wash it before
reuse. If skin irritation occurs: Get medical advice/ attention.
Clean mouth with water and drink afterwards plenty of water.
Most important symptoms and effects
Causes skin irritation. Causes serious eye irritation. Suspected of damaging fertility or the
unborn child.
Indication of any immediate medical attention and special treatment needed
Notes to Physician
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
Carbon dioxide (CO2). Dry chemical.
Unsuitable Extinguishing Media

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Specific Hazards Arising from the Chemical
Not determined.
Hazardous Combustion Products Toxic gases may be released.
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment as required.
Methods and material for containment and cleaning up
Prevent further leakage or spillage if safe to do so.
Halt spill at source and contain or dike spill with inert absorbent material. Transfer liquid to
containers for recovery or disposal. Shovel absorbent into drums for disposal in accordance
with local, state and federal regulations.
Precautions for safe handling
Handle in accordance with good industrial hygiene and safety practice. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Use personal protective equipment as required. Wash face, hands, and any
exposed skin thoroughly after handling. Wear eye/face protection.
Conditions for safe storage, including any incompatibilities
Storage Conditions
None known based on information supplied.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
STEL: 10 mg/m3 respirable
fraction
TWA: 2 mg/m3 respirable fraction
TWA: 15 mg/m3 total dust
TWA: 5 mg/m3 respirable fraction
(vacated) TWA: 5 mg/m3 fume
(vacated) TWA: 10 mg/m3 total
dust
(vacated) TWA: 5 mg/m3
respirable fraction
(vacated) STEL: 10 mg/m3 fume
Ceiling: 15 mg/m3 dust
TWA: 5 mg/m3 dust and fume
STEL: 10 mg/m3 fume
Appropriate engineering controls
Showers. Eyewash stations. Ventilation systems.

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Individual protection measures, such as personal protective equipment
Eye/Face Protection
Wear approved safety goggles with side shields.
Wear rubber gloves. Wear protective work clothing.
None required in well ventilated areas. An approved organic vapor full face respirator is
advised for poorly ventilated areas.
General Hygiene Considerations
Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Physical State
Melting Point/Freezing Point
Boiling Point/Boiling Range
Flammability (Solid, Gas)
Upper Flammability Limits
Solubility in other solvents
Auto-ignition Temperature
Greater than 121.1 °C / 250 °F
Decomposition Temperature
10. STABILITY AND REACTIVITY
Not reactive under normal conditions.
Stable under recommended storage conditions.
Possibility of Hazardous Reactions
None under normal processing.
Under normal conditions of storage and use, hazardous polymerization will not occur.
None known based on information supplied.

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Hazardous Decomposition Products
Toxic gases may be released.
11. TOXICOLOGICAL INFORMATION
Information on likely routes of exposure
Causes serious eye irritation.
Diethylene glycol monomethyl ether
Information on physical, chemical and toxicological effects
Please see section 4 of this SDS for symptoms.
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Based on the information provided, this product does not contain any carcinogens or
potential carcinogens as listed by OSHA, IARC or NTP.
Suspected of damaging fertility or the unborn child.
Numerical measures of toxicity
12. ECOLOGICAL INFORMATION
Toxic to aquatic life with long lasting effects.
Toxicity to
microorganisms
Diethylene glycol
monomethyl ether
500: 72 h Desmodesmus
subspicatus mg/L EC50
7500: 96 h Lepomis
macrochirus mg/L LC50
static 7500: 96 h Lepomis
macrochirus mg/L LC50
5741: 96 h Pimephales
promelas mg/L LC50
500: 48 h Daphnia magna
mg/L EC50
10.4 - 12.0: 96 h Pimephales
promelas mg/L LC50 flow-
through

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Toxicity to
microorganisms
8.2: 96 h Pimephales
promelas mg/L LC50
0.66: 48 h water flea mg/L
EC50 0.66: 48 h Daphnia
pulex mg/L EC50
Persistence/Degradability
Diethylene glycol monomethyl ether
13. DISPOSAL CONSIDERATIONS
Disposal should be in accordance with applicable regional, national and local laws and
regulations.
Disposal should be in accordance with applicable regional, national and local laws and
regulations.
California Hazardous Waste Status
California Hazardous Waste Status
14. TRANSPORT INFORMATION
Please see current shipping paper for most up to date shipping information, including
exemptions and special circumstances.
This material may meet the definition of a marine pollutant
15. REGULATORY INFORMATION
International Inventories
Diethylene glycol
monomethyl ether

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
TSCA - United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL - Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS - European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS - Japan Existing and New Chemical Substances
IECSC - China Inventory of Existing Chemical Substances
KECL - Korean Existing and Evaluated Chemical Substances
PICCS - Philippines Inventory of Chemicals and Chemical Substances
AICS - Australian Inventory of Chemical Substances
SARA 313 - Threshold
Values %
Diethylene glycol monomethyl ether - 111-77-3
Ammonium hydroxide - 1336-21-6
CWA - Reportable
Quantities
CWA - Priority Pollutants
CWA - Hazardous
Substances
California Proposition 65
This product does not contain any Proposition 65 chemicals.
U.S. State Right-to-Know Regulations
Diethylene glycol monomethyl ether
Ammonium hydroxide
1336-21-6

- AF-5500 Anti Static Floor Finish
Revision Date: 29-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the
date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage,
transportation, disposal and release and is not to be considered a warranty or quality specification. The information
relates only to the specific material designated and may not be valid for such material used in combination with any other
materials or in any process, unless specified in the text.