®
SANDBLASTER SBN
COMMERCIAL
Low NO Commercial Gas Water Heaters
80% Thermal Efficiency
Front, Top or Rear Water Connections
Hydro Cannon Self Cleaning Device
x
State Water Heaters’ Sandblaster is the original Self Cleaning commercial gas water heater, with
a proven design that automatically reduces sediment buildup, the number one threat to any water
heater’s life expectancy and energy
The new computerdesigned Hydro Cannon self cleaningdevice
injects cold water into the tankunder pressure and then uses a
venturi action to create self cleaning turbulence. Self Cleaning
action keeps sediment in suspension, and keeps it moving, so it
does not get a chance to settle down. Sediment that would
otherwise build up in the tank is harmlesslycarried out when hot
water is drawn. With reduced sediment buildup, Sandblaster
commercial water heaters retain their rated efficiency longer,
last longer, and help keep water heating costs down!
Low NO – Complies with Texas requirements for low NOx emissions.
x
fficiency.
e
ASME Construction available on 200,000 thru 500,000 Btu sizes.
Induced Draft Built-In Blower – Blower is built into the top cover, factory
mounted and wired. No draft hood or barometric damper required.
Hydro Cannon Self-Cleaning Feature – Computer designed device
automatically reduces harmful sediment buildup inside the tank. Sandblaster®SBN™stays
energy-efficient, so it saves money throughout its life.
Foam insulation – Reduces heat loss over 2-1/2 times more effectively than
standard fiberglass.
CSA Certified and ASME Rate T&P Relief valve
Anodes – Long lasting stainless steel core anodes.
On/Off Power Switch – Eliminates the need
to wire a separate electrical connection box.
Intermittent Ignition Device – Eliminates
standing pilot and provides flame failure response
in less than one second.
Glasslined Tank – Glass is applied after the
complete tank has been assembled to give a
seamless barrier against corrosion by hot water.
For more information on Sandblaster®, contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
Factory-installed Energy Cut-Off (“ECO”) safety switch
Tank Inspection Port for easy access to tank interior on all models.
Maximum Hydrostatic Working Pressure: 160 psi
Three Water Connection Options – Inlet and outlet connections are located
on the top, front and rear offering installation flexibility (Hydro Cannon device on front
connection only).
3-Year Limited Warranty
or Optional 5-Year
Limited Tank Warranty
Fully Tested for Safety and Performance
Laboratory for 180°F hot water service. Meets rigid requirements of the National Sanitation
Foundation when equipped with optional leg kit. Certified for use on combustible flooring.
Meets the thermal efficiency and standby loss requirements of the U.S. Department of
energy and current edition of ASHRAE/IESNA 90.1.
Options:
– Leg Kit for UL Sanitation to Meet NSF 5
– Manifold Kits for Multiple Gas Heater Installations:
Dual Manifold Kit #9003426205
Triple Manifold Kit #3003427205
Quad Manifold Kit #3003428205
– Design certified by the Underwriter’s
– Kit #9003425205.
SCGSS00407 Revised October 2012
®
SANDBLASTER SBN
COMMERCIAL
Low NO Commercial Gas Water Heaters
Model Number Cap. BTUH 100° Rise 40° 100° 140° A B C D E F G H I J (lbs.) (lbs.)
SBN71 120NE 166 288 115
SBN81 154NE 206 369 148 106
SBN100 180NE 245 432 173 123
SBN95 199NE* 263 477 191 136
SBN100 199NE 263 477 191 136
SBN100 199NES 477 191 136
SBN100 199NES A 477 191 136
SBN100 200NES 263 477 191 136
SBN100 200NES A 263 600 240 171
SBN100 250NE 312 600 240 171
SBN100 250NE A 312 659 264 188
SBN100 275NE 337 659 264 188
SBN100 275NE A 337 659 264 188
SBN85 310NE 360 743 297 212
SBN85 310NE A 360 743 297 212
SBN85 366NE 415 878 351 241
SBN85 366NE A
SBN85 390NE
SBN85 390NE A
*Models rated at 82% thermal efficiency
SBN95 199NE available for sale in California only.
+SBN71 120 NE is approved for 5” vent using 6 & 5 reducer.
x
First Hour Approx. Approx.
Gallon Rate Gallons Weight Weight
+
71
81
100
93
100
100
100
100
100
100
100
85
85
85
85
85
85
120,000
154,000
180,000
199,000
199,000
199,000
199,000
250,000
250,000
275,000
275,000
310,000
310,000
366,000
366,000
390,000
390,000
415 878 351 241
438
438
935
935
374
374
82
267
267
1
63
/4591/2507/
4
1
4
68
/462 535/
1
4
72
/
4
70
1
70
4
/
4
72
1
4
72
/
4
1
4
72
/270 615/8201/221 61 6 273/
1
4
72
/270 615/8201/221 61 6 273/
1
72
4
/270 615/8201/221 61 6 273/
1
72
4
/270 615/8201/221 61 6 273/
1
72
4
/270 615/8201/221 61 6 273/
1
4
/270 615/8201/221 61 6 273/
72
1
/270 615/8201/221 61 6 273/
4
72
1
4
/270 615/8201/221 61 6 273/
72
1
4
/272 201/2213/
72
1
4
/272 621/2201/2213/
72
1
/272 621/2221/221
4
72
1
72
4
/
2
1
4
72
/
2
1
4
/
2
72
8
195/
8
201/
2
8
7
615/
8
201/
/
8
7
615/
/
8
70
615/
7
/
8
7
/
8
7
/
8
7
/
8
7
/
8
7
/
8
62
72
62
72
Model Number Top Front Rear Top Front Rear
S
BN71 120NE
S
BN81 154NE
S
BN100 180NE
S
BN95 199NE
S
BN100 199NE
S
BN100 200NES
S
BN100 200NES A
S
BN100 250NE
S
BN100 250NE A
S
BN100 275NE
S
BN100 275NE A
S
BN85 310NE
S
BN85 310NE A
S
BN85 366NE
S
BN85 366NE A
S
BN85 390NE
S
BN85 390NE A
2
8
201/
2
201/
2
8
1
/
2
1
1
/
2
/
2
1
221/
2
/
2
1
1
/2222121
/262
3
/
4
19 517/86273/4520 —
3
545/
8
/
4
21 273/4550 —
3
21 273/4550 —
/
4
3
/
4
21 273/
3
21 273/4550 —
/
4
3
/
4
3
/
4
3
/
4
3
/
4
3
/
4
3
/
4
3
/
4
3
/
4
4
4
1
1
1
1
6
61
6
6
61
61
63
63
63
63
63
63
Water Connections In Inches
Inlet Outlet
4
6
4
4
4
4
4
4
4
4
3
6
/
4
27
3
6
/
4
27
6
273/
4
3
6
/72 62 22 21 27
4
3
6
27
/
4
3
6
/27
4
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
2
2
2
2
2
2
11/
2
2
11/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
11/
2
11/
2
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/2NA 11/211/
NA 11/211/2NA 11/211/
620 —
660 —
—710
660 —
—710
660 —
—710
720 —
—770
830 —
—880
830 —
—880
2
2
2
2
2
2
2
11/
2
2
11/
2
11/
11/
EMSAgnippihSsehcnInisnoisnemiDyrevoceRyrevileDtupnI
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
®
®
Low Lead Content
Sandblaster®SBN™Sample Specifications
Gas water heater(s) shall be a State Water Heaters’ Sandblaster®SBN™Model Number,
____________________ ,witha gallon storage capacity, an input rate of
Btu/Hour gas, and a recovery rate of gallons per hour at a
degree Fahrenheittemperature rise.
Units shall have hot surface ignition requiring a 120VAC/5AMP power supply, fan-assisted
combustion, and easily removable tubular stainless steel burner tube with individual orifices.
The ignition control shallhave integrated self-diagnostic capability andmust prove combustion
fan operation for systemto operate.The units shall comply with Texas similar requirements
for low NOx emissions. The water heater(s) shall not use flame impingement or flame
quenching as a means of controlling NOx emissions. The water heater tank shall be
additionally protected against premature failure in the following ways:
1. A -year limited warrantyagainst failure due tocorrosion, metal fatigueor overheating
caused by the buildup of scale, filmor other sediment.
2. Against electrolytic corrosion by multiple, factor y-installed anodes.
3. Against failure due to overheating caused by the buildup of scale, film and other sediment
by a self cleaning device. The device shall be properly positioned so that it directs the flow of
inlet water in such a way that microscopic particles of precipitated solids shall be kept in
suspension and exhausted from the water heater on that or successive hot water draws.
The burner(s) shall have an individual orifice for each burner tube and be constructed of tubular
aluminized or stainless steel mounted in an easily removable tray.
Water heater(s) shall havethe UL seal of certification,a working pressure of 160 psi,a CSA certified and
ASME rated T&P relief valve, and a 2
For more information on Sandblaster®, contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCGSS00407 Revised October 2012 © 2012 State Industries, Inc. Printed in U.S.A
3
⁄4˝x33⁄4˝ tank inspection port.