State Water Heaters SANDBLASTER CSB 120, SANDBLASTER CSB 82, SANDBLASTER CSB 52 Specifications
Page 1
COMMERCIAL
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SOLID.STATE.
SANDBLASTER
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as a recovery heater having its own storage tank. Note: Not recommended
for sanitizing water application.
FEATURES
Meets or exceeds the requirements of ASHRAE 90.1b-1992 and ASHRAE/IESNA 90.1-2004.
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element
availability chart on back). Patented gold elements provide long life and superior scaling
resistance. Low watt density means lower surface temperature to minimize scale buildup
and more surface to heat water. Gold elements carry a one-year warranty against failure
due to lime scale build-up.
GLASS-LINED TANK - Three sizes: 50, 80 and 119 gallon capacity. Tank interior is
coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is
vermin proof.
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess
current flow. Meets National Electrical Code requirements that non-ASME tanks must
have internal fusing when current draw exceeds 48 amps.
STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.
Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase
also available.
TERMINAL BLOCK - Factory installed. Just bring the service to the heater and connect to block.
CONTROLS - One temperature control (adjustable through a range of 120° to 180°F)
and manual reset high temperature cut-off per element. Thermostat step control may
be achieved by varying settings on individual temperature controls. Located behind
hinged control compartment door for quick, easy access.
OTHER STANDARD FEATURES -
Ŷ
Surface mounted thermostats
Ŷ
Simplified circuitry, color coded for ease of service Ŷ
Two anode rods for maximum corrosion protection Ŷ Cabinet has bonderized undercoat
with baked enamel finish Ŷ Bottom inlet and top outlet openings Ŷ Brass drain valve Ŷ
CSA / ASME temperature and pressure relief valve Ŷ Single panel control box. Ŷ THREE
YEAR LIMITED TANK WARRANTY - For complete warranty information, consult written
warranty or contact State Water Heaters.
OPTIONS -
Ŷ
UL and cUL listed conversion kits to adjust voltage and kW requirements in the field
before and after installation Ŷ ASME 150 psi tank construction Ŷ International voltages 220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements
Ŷ
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205,
three heaters- part # 9003430205 and four heaters- part # 9003431205
SCESS00508 September 2010R
MODELS
CSB 52, 82, 120
SURFACE MOUNT THERMOSTATS
(OPTIONAL)
Page 2
COMMERCIAL
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SOLID.STATE.
SCESS00508
SUGGESTED SPECIFICATION
The heater(s) shall be SandBlaster CSB Series Commercial Electric Model Number ______________ as manufactured by State Industries shall be rated at
____________kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall be
________ gallon capacity. Tanks shall be 50, 80 and 119 gallon capacity and shall have 150 psi working pressure and be equipped with extruded high density anode.
All internal surfac es of the heater(s) exposed to water shall be glass-lin ed with an alkaline borosili cate compo sition that has been fused- to-steel by firing at a temperature range
of 1400°F to 1600°F. Electric heating elements shall be gold plated low watt den sity screw-in t ype. Each elemen t shall be controlled by an individually mounted thermostat and high temperature
cut-off switch. All internal circuits shall be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance
through hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provid ed. The drain valve shal l be located in the fr ont for ease
of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply ASME rated temperature and pressure relief valve. Fully illustrated
instruction manual to be included. Meets ASHRAE 90.1b -1992 and ASHR AE/IESNA 90.1-20 04.
Figured at 1 kW (3413 BTU) = 4.1 Gallons at 100°F temperature rise.
RECOVERY RATE IN GALLONS PER HOUR AT TEMPERATURE RISE OF
Standard
kW Input
BTU/ Hour3O°
F
17
°
C
40
°
F
22
°
C
5O
°
F
28
°
C
60
°
F
33
°
C
70
°
F
39
°
C
8O
°
F
45
°
C
9O
°
F
50
°
C
100
°
F
56
°
C
110
°
F
61
°
C
120
°
F
67
°
C
130
°
F
72
°
C
140
°
F
78
°
C
6 20,478 82
310
62
2334916641155351333111627103
25 9322852178197218
66
9 30,717 123
4659234974279622335319946174411553714034127311162810726100
12 40,956 164
620
123
46598372823107026661233552074918645169411553814335133
13.5 46,075 184
698
138
523
111
419923497929969262622335520950190461744316140150
15 51,195 205
775
154
582
123
465
102
3888833277291682586123356211511944714944166
18 61,434 246
930
184
698
148
558
123
465
105
39992349823107427967254622335721553199
24 81,912 328
1241
246
930
197
744
164
620
140
532
123
465
109
4149837290338823107628670266
27 92,151 369
1396
276
1047
221
938
185
609
158
509
138
523
123
465
111
410
101
391923408532279299
30 102,390 410
1551
307
1163
246
930
205
775
176
665
154
582
137
517
123
465
112
423
102
3889535888332
36 122,868 492
1861
369
1396
295
1117
246
930
211
798
184
698
164
620
148
556
134
508
123
465
113
429
105
399
40.5 138,226 554
2094
418
1570
332
1256
277
1047
237
897
208
785
185
698
166
628
151
634
138
582
128
537
119
498
45 153,585 615
2326
461
1745
369
1398
307
1163
263
997
230
872
205
755
184
698
168
634
154
582
142
537
132
498
54 184,302 738
2791
554
2094
443
1675
359
1396
316
1196
277
1047
246
930
221
837
201
761
185
696
170
644
158
598
Model
Number
Tank
Capacity
Dimensions
Inlet/
Outlet (NPT)
Approx. Ship.
Wt. (Lbs.)
ABC
gal.
litre
in. cm in. cm in. cm in. cm Ib kg
CSB 52**SFE
50 189
55 3/4
142
21 3/4
55.2
27
68.6
1 1/4
3.2 265 120
CSB 82**SFE
80 300
60 1/4
153
25 1/2
64.8
31
78.7
1 1/4
3.2 280 127
CSB 120**SFE 119 450
62 1/4
158.1
29 1/2
75.0
35
88.9
1 1/4
3.2 390 177
*208 volt models may contain three (3) additional elements. ** Elements available in incoloy only.
kW
Input
Model Numbers
Tank Capacity in Gallons
Number
Of
Elements
Element
Wattag e
Full Load Current In Amperes
Single Phase Three Phase
50 80 119 208V 240V 277V 480V 208V 240V 480V
6 CSB 52 6 SFE CSB 82 6 SFE CSB 120 6 SFE 3 2,000 28.8 25.0 21.7 12.5 16.7 14.4 7.2
9 CSB 52 9 SFE CSB 82 9 SFE CSB 120 9 SFE 3 3,000 43.3 37.5 **32.5 18.8 25.0 21.7 10.8
12 CSB 52 12 SFE CSB 82 12 SFE CSB 120 12 SFE 3 4,000 57.7 50.0 43.3 25.0 33.3 28.9 14.4
13.5 CSB 52 135 SFE CSB 82 135 SFE CSB 120 135 SFE 3 4,500 64.9 56.3 **48.7 28.1 37.5 32.5 16.2
15 CSB 52 15 SFE CSB 82 15 SFE CSB 120 15 SFE 3 5,000 72.1 62.5 **54.2 31.3 41.6 36.1 18.0
18 CSB 52 18 SFE CSB 82 18 SFE CSB 120 18 SFE 3* 6,000 86.5 75.0 65.0 37.5 50.0 43.3 21.7
24 CSB 52 24 SFE CSB 82 24 SFE CSB 120 24 SFE 6 4,000 115.4 100.0 86.6 50.0 66.6 57.7 28.9
27 CSB 52 27 SFE CSB 82 27 SFE CSB 120 27 SFE 6 4,500 129.8 112.5 **97.5 56.3 74.9 65.0 32.5
30 CSB 52 30 SFE CSB 82 30 SFE CSB 120 30 SFE 6 5,000 144.2 125.0 **108.3 62.5 83.3 72.2 36.1
36 CSB 52 36 SFE CSB 82 36 SFE CSB 120 36 SFE 6* 6,000 173.1 150.0 130.0 75.0 99.9 86.6 43.3
40.5 N/A CSB 82 405 SFE CSB 120 405 SFE 9 4,500 194.7 168.8 **146.2 84.4 112.4 97.4 48.7
45 N/A CSB 82 45 SFE CSB 120 45 SFE 9 5,000 216.3 187.5 **162.5 93.8 124.9 108.3 54.1
54 N/A CSB 82 54 SFE CSB 120 54 SFE 9 6,000 N/A 225.0 194.9 112.5 149.9 129.9 65.0
2010RSeptember
Loading...