Statewaterheaters CSB 52 User Manual
COMMERCIAL
MODELS
CSB 52, 82, 120
SURFACE MOUNT THERMOSTATS
SANDBLASTER
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as a recovery heater having its own storage tank. Note: Not recommended
for sanitizing water application.
FEATURES
Meets the current edition of ASHRAE/IESNA 90.1 standards.
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element
availability chart on back). Patented gold elements provide long life and superior scaling
resistance. Low watt density means lower surface temperature to minimize scale buildup
and more surface to heat water. Gold elements carry a one-year warranty against failure
due to lime scale build-up.
GLASSLINED TANK - Three sizes: 50, 80 and 119 gallon capacity. Tank interior is
coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is
vermin proof.
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess
current flow. Meets National Electrical Code requirements that non-ASME tanks must
have internal fusing when current draw exceeds 48 amps.
STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.
Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase
also available.
(OPTIONAL)
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
Revised October 2012 80500SSECS
TERMINAL BLOCK - Factory-installed. Just bring the service to the heater and connect to block.
CONTROLS - One temperature control (adjustable through a range of 120° to 180°F)
and manual reset high temperature cut-off per element. Thermostat step control may
be achieved by varying settings on individual temperature controls. Located behind
hinged control compartment door for quick, easy access.
OTHER STANDARD FEATURES -
■
Surface mounted thermostats
Two anode rods for maximum corrosion protection ■ Cabinet has bonderized undercoat
with baked enamel finish ■ Bottom inlet and top outlet openings ■ Brass drain valve
■ CSA Certified and ASME Rated T&P Relief Valve ■ Single panel control box. ■ THREE
YEAR LIMITED TANK WARRANTY - For complete warranty information, consult written
warranty or contact State Water Heaters.
■
Simplified circuitry, color coded for ease of service ■
OPTIONS -
■
UL and cUL listed conversion kits to adjust voltage and kW requirements in the field
before and after installation ■ ASME 150 psi tank construction ■ International voltages 220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements
■
MANIFOLD KITS - for multiple tank installations. Two heaters-part # 9003429205,
three heaters-part #9003430205 and four heaters-part #9003431205
SOLID.STATE.
COMMERCIAL
RECOVERY RATE IN GALLONS PER HOUR AT TEMPERATURE RISE OF
Standard
kW Input
BTU/
Hour
Figured at 1 kW (3413 BTU) = 4.1 Gallons at 100°F temperature rise.
3O°F
40°F
5O°F
60°F
70°F
8O°F
9O°F
100°F
110°F
Water
Flow
17°C
22°C
28°C
33°C
39°C
45°C
50°C
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
GPH
LPH
62
310
2334916641155351333111627103
4659234974279622335319946174411553714034127311162810726100
123
620
46598372823107026661233552074918645169411553814335133
138
698
775
930
1241
1396
1551
1861
2094
2326
2791
111
523
419923497929969262622335520950190461744316140150
154
123
582
184
698
246
930
276
1047
307
1163
369
1396
418
1570
461
1745
554
2094
102
465
3888833277291682586123356211511944714944166
148
123
558
197
744
221
938
246
930
295
1117
332
1256
369
1398
443
1675
105
465
39992349823107427967254622335721553199
164
140
532
158
509
176
665
211
798
237
897
263
997
316
1196
123
465
138
523
154
582
184
698
208
785
230
872
277
1047
620
185
609
205
775
246
930
277
1047
307
1163
359
1396
56°C
25 9322852178197218
109
4149837290338823107628670266
123
111
465
410
137
123
517
465
164
148
620
556
185
166
698
628
205
184
755
698
246
221
930
837
120°F
61°C
101
391923408532279299
112
423
134
508
151
634
168
634
201
761
67°C
102
3889535888332
123
465
138
582
154
582
185
696
130°F
72°C
113
429
128
537
142
537
170
644
140°F
78°C
66
105
399
119
498
132
498
158
598
142
153
158.1
Element
Wattage
Dimensions
21 3/4
55.2
25 1/2
64.8
29 1/2
75.0
Inlet/
Outlet (NPT)
27
68.6
78.7
88.9
1 1/4
1 1/4
1 1/4
31
35
Approx. Ship.
Wt. (Lbs.)
3.2 265 120
3.2 280 127
3.2 390 177
Full Load Current In Amperes
Single Phase Three Phase
kW
Input
Model
Number
CSB 52**SFE
CSB 82**SFE
CSB 120**SFE 119 450
Model Numbers
Tank Capacity in Gallons
Tank
Capacity
gal.
litre
50 189
80 300
ABC
in. cm in. cm in. cm in. cm Ib kg
55 3/4
60 1/4
62 1/4
Number
Of
Elements
6 CSB 52 6 SFE CSB 82 6 SFE CSB 120 6 SFE 3 2,000 28.8 25.0 21.7 12.5 16.7 14.4 7.2
9 CSB 52 9 SFE CSB 82 9 SFE CSB 120 9 SFE 3 3,000 43.3 37.5 **32.5 18.8 25.0 21.7 10.8
12 CSB 52 12 SFE CSB 82 12 SFE CSB 120 12 SFE 3 4,000 57.7 50.0 43.3 25.0 33.3 28.9 14.4
13.5 CSB 52 135 SFE CSB 82 135 SFE CSB 120 135 SFE 3 4,500 64.9 56.3 **48.7 28.1 37.5 32.5 16.2
15 CSB 52 15 SFE CSB 82 15 SFE CSB 120 15 SFE 3 5,000 72.1 62.5 **54.2 31.3 41.6 36.1 18.0
18 CSB 52 18 SFE CSB 82 18 SFE CSB 120 18 SFE 3* 6,000 86.5 75.0 65.0 37.5 50.0 43.3 21.7
24 CSB 52 24 SFE CSB 82 24 SFE CSB 120 24 SFE 6 4,000 115.4 100.0 86.6 50.0 66.6 57.7 28.9
27 CSB 52 27 SFE CSB 82 27 SFE CSB 120 27 SFE 6 4,500 129.8 112.5 **97.5 56.3 74.9 65.0 32.5
30 CSB 52 30 SFE CSB 82 30 SFE CSB 120 30 SFE 6 5,000 144.2 125.0 **108.3 62.5 83.3 72.2 36.1
36 CSB 52 36 SFE CSB 82 36 SFE CSB 120 36 SFE 6* 6,000 173.1 150.0 130.0 75.0 99.9 86.6 43.3
40.5 N/A CSB 82 405 SFE CSB 120 405 SFE 9 4,500 194.7 168.8 **146.2 84.4 112.4 97.4 48.7
45 N/A CSB 82 45 SFE CSB 120 45 SFE 9 5,000 216.3 187.5 **162.5 93.8 124.9 108.3 54.1
54 N/A CSB 82 54 SFE CSB 120 54 SFE 9 6,000 N/A 225.0 194.9 112.5 149.9 129.9 65.0
*208 volt models may contain three (3) additional elements. ** Elements available in incoloy only.
SUGGESTED SPECIFICATION
The heater(s) shall be SandBlaster CSB Series Commercial Electric Model Number ______________ as manufactured by State Industries shall be rated at
____________kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall be
________ gallon capacity. Tanks shall be 50, 80 and 119-gallon capacity and shall have 150 psi working pressure and be equipped with extruded high density anode.
All internal surfac es of the heater(s) exposed to water shall be glasslined with an alkaline borosilic ate composition that has been fused-to-steel by firing at a temperature range
of 1400°F to 1600°F. Electric heating elements shall be gold plated low watt density screw-in type. Each element shall be controlled by an individually mounted thermostat and high temperature
cutoff switch. All internal circuits shall be fused. The outer jacket shall be of baked enamel finish and shall be provided wi th full size control compartment for performance of service and maintenance
through hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located in the front for ease
of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply ASME rated temperature and pressure relief valve. Fully illustrated
instruction manual to be included. Meets current edition of ASHRAE/IESNA 90.1.
V084V042V802V084V772V042V8029110805
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SCESS00508
Revised October 2012
SOLID.STATE.
Loading...