STATESMAN BIW0714, XD0806W Instruction Manual
Please read these instructions carefully before use and retain for future reference.
Before switching on your appliance – Always check for any damage that may have been caused in transit.
Instruction Manual
BIW0714 BUILT-IN 7KG 1400RPM WASHING MACHINE
Serial number:
2
CONTENTS
Important Safety Instructions ................... 3
- General Safety ......................................... 3
- Intended Use ............................................ 4
- Children’s Safety ...................................... 4
Technical Specication .............................. 5
Appliance Overview .................................... 6
Installation ................................................... 7
- Removing Transportation Bolts ................ 7
- Appropriate Installation Location ............. 7
- Connecting Water Supply .....................7-8
- Connecting to the Drain ........................... 8
- Adjusting the Feet .................................... 8
- Electrical Connection ............................... 9
Transportation of the Appliance ................. 10
Built-In Installation ..............................10-13
Preparation ............................................... 14
Laundry Wash Symbols ..............................14
Preparing Laundy for Washing ................... 15
Energy Saving Tips ..................................... 15
Initial Use .................................................... 15
Correct Load Capacity ............................... 16
Loading the Laundry .................................. 16
Using Detergent and Softener .................... 16
Tips for Ecient Washing ........................... 17
Operating Instructions ............................. 18
Control Panel .............................................. 18
Preparing the Appliance ............................. 18
Program Selection ...................................... 18
Main Programs ......................................19-20
Additional Functions ................................... 20
Time Display ............................................... 20
Delay ........................................................... 20
Temperature Selection ................................ 20
Spin Speed Selection ................................. 21
Loading Door Lock ..................................... 21
Changing the Speed/Temperature Settings
of a Program ............................................... 21
Adding or Removing Laundry ..................... 21
Child Lock .................................................. 21
Cancelling the Program .............................. 22
End Sound Signal ....................................... 22
Excess Foam Removal ............................... 22
Load Balancing System ............................. 22
Program and Consumption Table ........... 23
Cleaning and Maintenance ...................... 24
Cleaning Detergent Drawer ........................ 24
Cleaning Loading Door and Drum .............. 24
Cleaning Body & Control Panel .................. 24
Cleaning Water Intake Filter ..................24-25
Draining Remaining Water and Cleaning
Pump Filter ................................................. 25
Troubleshooting ...................................26-27
Error Display Codes ................................. 28
Disposal Information ................................ 28
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all of the instructions even if you feel you are familiar with the product, and nd a
place to keep this manual handy for future reference.
General Safety
When using electrical appliances, basic safety precautions should always be followed:
• Always have the installation and repairs carried out by a qualied electrician. Incorrect
installation or inadequate repairs may result in a major source of danger for the user and
invalidate the warranty.
• Do not operate the appliance with a damaged cord or plug, after it malfunctions or has been
dropped or damaged in any way.
• Check the voltage of the appliance matches the household voltage, which is located on the
rating label.
• Place the appliance on a rigid, at and level surface.
• Never place the appliance on a carpet-covered oor. Otherwise, lack of airow beneath the
machine will cause electrical parts to overheat. This will cause problems with your appliance.
• The water supply and draining hoses must be securely fastened and remain undamaged.
Otherwise, there is the risk of water leakage. Only install the appliance with the hose provided.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge.
• Cleaning and user maintenance shall not be made by children
• Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• Before using the appliance ensure that all packaging materials and transit bolts are removed,
keep the transit bolts in a safe place in case you move in the future.
• Never open the loading door or remove the lter while there is still water in the drum. Otherwise,
risk of ooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to open approximately
two minutes after the washing cycle comes to an end. In case of forcing the loading door to
open, the door and the lock mechanism may get damaged.
• Unplug the appliance when not in use.
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by
gripping the plug.
• Do not lean or put any weight on the open door of the appliance.
• Before each use ensure that all foreign objects are removed from the clothing being washed
as these may damage the appliance and garments.
• Use detergents, softeners and supplements suitable for automatic washing machines only.
• Follow the instructions on the garment tags and on the detergent packaging.
• The appliance must be unplugged during installation, maintenance, cleaning and repairing
procedures.
• Use of an extension cord is not recommended with this appliance.
• Do not install the appliance in bath rooms, wet rooms or similar rooms.
• Do not store explosive substances such as aerosol cans with a ammable propellant near
the appliance.
4
Intended Use
• This appliance has been designed for domestic use. It is not suitable for commercial use and it
must not be used out of its intended use
• The appliance must only be used for washing and rinsing of laundry that are marked accordingly.
Children’s Safety
• Packaging materials are dangerous to children. Keep packaging materials in a safe place away
from reach of children.
• The door may become extremely hot during operation; ensure that children and animals are
kept away from the appliance.
• Keep detergents out of reach of children.
• Before each use, check that the drum of the appliance is empty.
• Do not let children tamper with the appliance. Use child lock to prevent children from intervening
with the appliance.
WARNING: The appliance is heavy and care is needed when unpacking and moving it.
Get extra help and only hold the appliance by the casing – never hold by the door or detergent
drawer.
5
TECHNICAL SPECIFICATION
Trade Mark Statesman
Model Number BIW0714
Rated Capacity (kg) 7kg
Category Type Front Loading
Programs to which the information relates to
[3] Cotton 60°C and 40°C
Energy Eciency Class / Scale from A+++(Highest
Eciency) to D (Lowest Eciency) A+++
Annual Energy Consumption (kWh/yr)
[1] 174
Energy Consumption of the Standard 60°C
Cotton Program at Full Load (kWh) 0.82
Energy Consumption of the Standard 60°C
Cotton Program at Partial Load (kWh) 0.82
Energy Consumption of Standard 40°C
Cotton Program at Partial Load (kWh) 0.62
Weighted power “o-mode” (W) 0.5
Weighted Power “left-on mode” (W) 1
Annual Water Consumption (L/yr)
[2] 1000
Spin Eciency Class
Scale from A (most ecient) to G (least ecient) B
Maximum Spin Speed (rpm) 1400
Remaining Moisture Content (%) dependent on program selected 50% – 55%
Duration of the standard program
Cotton 60°C full load (7kg) 229min
Cotton 60°C partial load (3.5kg) 209min
Cotton 40°C partial load (3.5kg) 166min
Other
Water Supply cold
Water Supply Pressure Minimum (MPa) 0.05 MPa
Maximum (MPa) 1 MPa
Noise Emission (dB) Wash (dB) 57
Spin (dB) 76
Dimensions (h*w*d) (mm) 825*595*540
Net Weight (kg) 63
Gross Weight (kg) 66
Package Weight (kg) 3
Rated Power (W) 2000W
Voltage (V) 220~240
Frequency (Hz) 50
Built-In Yes
[1] Energy Consumption based on 220 standard washing cycles for cotton programs at 60°C and 40°C at full and partial load, and the consumption of the
low-power modes. Actual energy consumption will depend on how the appliance is used.
[2] Water consumption based on 220 standard washing cycles for cotton programs at 60°C and 40°C at full and partial load. Actual water consumption will
depend on how the appliance is used.
[3] “Standard 60°C cotton programs” and the “standard 40°C cotton programs” are the standard washing programs to which the information in the label and
the che relates and these programs are suitable to clean normally soiled cotton laundry and that they are the most ecient programs in terms of combined
energy and water consumption.
IMPORTANT NOTE: Technical specications may be changed without prior notice to improve the quality of the product.
6
APPLIANCE OVERVIEW
Detergent Drawer Control Panel
Door
Power Plug
Outlet Hose
Detergent Drawer
Accessories
Transport
Hole Plug
Inlet Pipe Outlet Hose
Support
Filter
Built-in Kit Included
1. Self-tapping screws (ST4*12)
2. Self-tapping screws (M5*12)
3. Hinges
4. Counter magnet
5. Spacer
6. Positioning template
1. 2.
3. 4.
5. 6.
7
Refer to the nearest Authorised Service Agent for installation of the product. To make the product
ready for use, review the information in this user manual and make sure that the electricity, tap water
supply and water drainage systems are appropriate before calling the Authorised Service Agent. If
they are not, call a qualied technician and plumber to have any necessary arrangements carried
out.
Note: Make sure that the water inlet and discharge hoses, as well as the power cable are not folded,
pinched or crushed while pushing the product into its place after installation or cleaning procedures.
INSTALLATION
WARNING: Manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorised persons.
WARNING: Prior to installation, visually check if the product has any defects on it. If so, do not
have it installed. Damaged products cause risks for your safety.
WARNING: Packaging materials are dangerous to children. Keep packaging materials in a safe
place away from reach of the children.
Removing transportation bolts
Before using this washing machine, the transportation bolts must be removed from the back of
the machine.
• Loosen all bolts with a suitable spanner until they
rotate freely.
• Remove transportation safety bolts by turning
them gently.
• Attach the plastic hole plugs supplied into the
holes on the rear panel
• Keep the transportation safety bolts in a safe place
to reuse when the washing machine needs to be
moved again in the future.
Note: Never move the product without the transportation safety bolts properly xed in place!
Appropriate installation location
Place the machine on a rigid oor. Do not place it on a long pile rug or similar surfaces.
Place the product on a solid and at oor that has sucient load carrying capacity!
Do not place the product on the power cable.
Do not install the product in places where temperature may fall below 0°C.
Connecting water supply
The water supply pressure required to run the product is between 0.5 to 10 bars (0.05 – 1 MPa). It is
necessary to have 10 – 80 litres of water owing from the fully open tap in one minute to have your
machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
WARNING: This washing machine has a single water inlet for cold water only. It should not be
connected to the hot water tap. In such a case the laundry will get damaged or the product will
switch to protection mode and will not operate.
WARNING: Do not use old or used water inlet hoses on the new product. It may cause stains
on your laundry.
• Connect the inlet hose supplied to the cold water
inlet on the back of the appliance
• Tighten all hose nuts by hand. Never use a tool when
tightening the nuts.
8
• Open the taps completely after making the hose connection
to check for water leaks at the connection points. If any
leaks occur, turn o the tap and remove the nut. Retighten
the nut carefully after checking the seal. To prevent water
leakages and damages caused by them, keep the taps
closed when the machine is not in use.
Connecting to the drain
• Drain hose shall be attached to a stand pipe or sink waste, do not connect to surface
water drains.
• The hose should be attached to a height of at least 60 cm, and 100cm at most.
• To prevent owing of dirty water back into the machine and to allow for easy discharge, do not
immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is
too long, cut it short.
WARNING: Your house will be ooded if the hose comes out of its housing during water
discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent
such situations and to ensure smooth water intake and discharge of the machine, x the end of the
discharge hose tightly so that it cannot come out.
Adjusting the feet
In order to ensure that the product operates more silently and vibration free, it must stand level and
balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move
from its place and cause crushing and vibration problems.
• Loosen the lock nuts on the feet by hand or
by using a suitable spanner
• Adjust the feet until the product stands level
and balanced.
• Tighten all lock nuts again by using a suitable
spanner.
100cm
60cm
9
Electrical connection
Connect the product to a grounded outlet protected by a 13A fuse. The manufacturer shall not be
liable for any damages that will arise when the product is used without grounding in accordance with
the local regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after installation.
• If the current value of the fuse or breaker in the house is less than 13 Amps, have a qualied
electrician install a 13 Amp fuse.
• The voltage specied in the “Technical Specication” section must be equal to your
mains voltage.
• Do not make connections via extension cables
WARNING: Damaged power cables must be replaced by the Authorised Service Agents.
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown
in the rating label corresponds to your electricity supply. We recommend that this appliance be
connected to the mains supply via a suitable switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance become damaged or need replacing at any time, it must be
replaced by a special purpose made mains lead which can only be obtained from an Authorised
Service Agent.
WARNING: This appliance must be earthed
If the tted moulded plug is not suitable for your socket, then the plug should be cut o and an
appropriate plug tted.
Destroy the old plug, which is cut o as a plug with a bared cord could cause a shock hazard if
inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced
an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to ret the fuse
cover.
In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has
been tted. Colour of the replacement fuse cover must be the same colour as that visible on the pin
face of the plug. Fuse covers are available from any good electrical store.
IMPORTANT
Fitting a dierent plug
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the terminals
on your plug, proceed as follows:
1. Connect the green - yellow or green (earth) wire to the terminal
in the plug marked ‘E’ or with the symbol f or coloured green
and yellow or green.
2. Connect the blue (neutral) wire to the terminal in the plug marked
‘N’ or coloured black.
3. Connect the brown (live) wire to the terminal in the plug marked
‘L’ or coloured red.
With the alternative plugs a 13A fuse must be tted either in the plug
or adaptor or in the main fuse box. If in doubt contact a qualied
electrician.
Loading...