State Industries SUF 130 300NEA, SUF 100 199NE, SUF 60 120NE, SUF 130 400NEA, SUF 100 150NE User Manual
Page 1
COMMERCIAL
™
ULTRA FORCE
COMMERCIAL GAS WATER HEATERS
HIGH EFFICIENCY.
HIGHER DURABILITY.
Now up to 96% efficiency.
Page 2
Ultra Force
“
™
could pay for
itself in energy
cost savings alone.”
ULTRA FORCE
™
FOR ULTRA EFFICIENCY.
The best keeps
getting better.
Ultra Force™continues to be the most
efficient State commercial water heater
ever built, designed for excellent thermal
efficiency, outstanding durability and
maximum installation flexibility.
In comparison to standard water heaters
with only 80% efficiency, Ultra Force
delivers up to 400,000 BTU input with
up to 96% efficiency. This means greater
energy savings and more hot water
delivery for each energy dollar spent. In
fact, Ultra Force
energy cost savings alone.
™
could pay for itself in
A single Ultra Force unit is the ideal
cost-saving choice for restaurants and
other demanding commercial applications.
For larger demands, multiple units can be
manifolded together delivering even
greater capacity and recovery – all with
up to 96% efficiency.
Designed for efficient installations in a
large variety of locations, each model
features a small footprint and spacesaving design with zero clearance, topmounted gas and electrical controls, and
the versatility of standard venting or
direct venting.
4
Page 3
2
Designed for both
efficiency and durability.
1
Power from
the top down.
Powered
4
titanium anodes.
1
4
4
5
3
• Premixed burner delivers high
efficiency and quiet operation
• Unique glassed helical coil heat
exchanger maximizes heat transfer
as hot gasses swirl throughout the
spiral tube
• Quiet operation from optimized blower
and burner combination
Easier to install
2
and service.
• All controls, gas valve and the
combustion air blower located on top
for easy access
• Top-mounted controls protect unit
electronics from high water damage
• Less than 2” ceiling clearance required
for servicing
• 0” clearance required on all sides
Detailed heater
3
status information.
• Status of blower, igniter, igniter current,
gas valve, flame detection, air inlet
restrictions, exhaust vent restrictions,
acceptable gas supply pressure
• Precise temperature setting
• Constant log of number of cycles and
burner operating time
• Monitors, reports and diagnoses 32
potential operating faults
• Maintains log of any fault occurrences
• Long-lasting titanium powered anodes
protect from corrosion
• System calculates the precise current
required to maintain optimum protection
• Over time or as water conditions change,
the amount of power needed to protect
the tank is automatically adjusted
• Powered anodes require no
maintenance or inspection, providing
years of dependable service
Built to last.
5
• Corrosion-resistant tank with durable
glass-lining on all water-side surfaces
• Corrosion-resistant heat exchange coil
with glass-lined interior to protect
against corrosive flue gas
condensation
• Rugged thick foam insulation
3
ELECTRONIC
CONTROL PANEL
Provides ultimate precision in temperature control and
diagnostics. Includes status and fault indicating digital
temperature and numerical code display, temperature
and differential setting adjustment.
3
Page 4
ULTRA FORCE
™
FITS ALMOST ANYWHERE.
The new and improved Ultra Force
conveniently fits in the smallest possible
space to make it a practical choice for
even more installations. All serviceable
components are accessible from the front
and top to make placement easy in a
corner or flush against a wall. Plumbing
and venting connections are conveniently
located and provide greater flexibility.
Multiple venting
options.
Ultra Force puts an end to most venting
difficulties. That’s because all models may
be installed using standard one-pipe venting
or by using two-pipe direct venting to
eliminate potential negative air pressure
issues. For ease and convenience, all vents
can also be run vertically or through the
sidewall. Models with BTU inputs of
120K-240K have venting distances of up
to 50 eq. feet using standard 3˝ PVC, ABS
or CPVC pipe or up to 120 eq. feet using
4˝ PVC, ABS or CPVC pipe. Models with
BTU inputs of 300K-400K have venting
distances of up to 70 eq. feet using 4˝ PVC,
ABS or CPVC pipe.
Model Gallon BTU/ First Hour Recovery In GPH Height Diameter Depth
SUF 60 120NE
SUF 120 60 120,000 120,000 180 180 138 138 551/
SUF 150 100 150,000 150,000 243 243 173 173 75
SUF 100 150NE
SUF 199 100 199,000 199,000 300 300 230 230 75
SUF 100 199NE
SUF 240 100 240,000 240,000 346 346 288 288 75
SUF 100 250NE
SUF 130 300NEA
SUF 300 130 300,000 300,000 440 440 349 349 75
SUF 130 400NEA
SUF 400 130 399,900 399,900 557 557 466 466 75 1/
Capacity Hr. Input
Natural LP Natural LP Natural LP
Delivery @ 100˚ Rise∆ (Inches) (Inches) (Inches)
2
1
/
2
1
/
2
1
/
2
1
/
2
2
273/
273/
273/
273/
331/
331/
4
4
4
4
8
8
For more information on Ultra Force SUF, contact:
State Water Heaters
500 Tennessee Waltz Parkway,
Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
March 2008R
SCGBR00207
30
30
30
30
391/
391/
8
8
Loading...