State Industries SCGSS00407 User Manual
®
SANDBLASTER SBN
COMMERCIAL
Low NO Commercial Gas Water Heater
80% Thermal Efficiency
Front, Top or Rear Water Connections
Hydro Cannon Self-Cleaning Device
Complies with SCAQMD Rule 1146.2
Southern California and Texas Apporved
x
State Water Heaters’ Sandblaster is the original Self-Cleaning commercial gas water heater, with
a proven design that automatically reduces sediment buildup, the number one threat to any water
heater’s life expectancy and energy-efficiency.
The new computer designed Hydro Cannon self-cleaning device
injects cold water into the tank under pressure and then uses a
venturi action to create self-cleaning turbulence. Self-Cleaning
action keeps sediment in suspension, and keeps it moving, so it
does not get a chance to settle down. Sediment that would
otherwise build up in the tank is harmlessly carried out when hot
water is drawn. With reduced sediment buildup, Sandblaster
commercial water heaters retain their rated efficiency longer,
last longer, and help keep water heating costs down!
3-Year or Optional 5-Year Tank Warranty.
Low NO – Complies with SCAQMD Rule 1146.2. Southern Califorina
and Texas Approved.
x
ASME Construction available on 200,000 thru 500,000 Btu sizes.
Induced Draft Built-In Blower – Blower is built into the top cover, factory
mounted and wired. No draft hood or barometric damper required.
Hydro Cannon Self-Cleaning Feature – New computer designed device
automatically reduces harmful sediment buildup inside the tank. Sandblaster® SBN™ stays
energy-efficient, so it saves money throughout its life.
Foam insulation – Reduces heat loss over 2-1/2 times more effectively than
standard fiberglass.
CSA Certified and ASME Rate T&P Relief valve
Anodes – Long lasting stainless steel core anodes.
On/Off Power Switch – Eliminates the need
to wire a separate electrical connection box.
Intermittent Ignition Device – Eliminates
standing pilot and provides flame failure response
in less than one second.
Glass Lined Tank – Glass is applied after the
complete tank has been assembled to give a
seamless barrier against corrosion by hot water.
For more information on Sandblaster® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCGSS000407 August 2008R
Factory-installed Energy Cut-Off (“ECO”) safety switch.
Tank Inspection Port for easy access to tank interior on all models.
Maximum Hydrostatic Working Pressure: 160 psi.
Three Water Connection Options – Inlet and outlet connections are located
on the top, front
connection only).
Fully Tested for Safety and Performance
Laboratory for 180°F hot water service. Meets rigid requirements of the National Sanitation
Foundation when equipped with optional leg kit. Certified for use on combustible flooring.
Meets or exceeds the thermal efficiency and/or standby loss requirements of the U.S.
Department of energy and current addition of ASHRAE/IESNA 90.1.
Options:
– Leg Kit for UL Sanitation to Meet NSF 5
– Manifold Kits for Multiple Gas Heater Installations:
Dual Manifold Kit #9003426205
Triple Manifold Kit #3003427205
Quad Manifold Kit #3003428205
and rear offering installation flexibility (Hydro Cannon device on front
– Design certified by the Underwriter’s
– Kit #9003425205.
197285_SCGSS000407.indd 1197285_SCGSS000407.indd 1 8/15/08 8:57:36 AM8/15/08 8:57:36 AM
®
SANDBLASTER SBN
COMMERCIAL
Low NO Commercial Gas Water Heater
Model Number Cap. BTUH 100° Rise 80° 100° 140° A B C D E F G H I J (lbs.) (lbs.)
x
First Hour Approx. Approx.
Gallon Rate Gallons Weight Weight
EMSAgnippihSsehcnI ni snoisnemiDyrevoceRyrevileDtupnI
SBN71 120NE 71 120,000 166 145 116 83 63 41/4591/2507/8195/8191/2517/85273/4400 —
SBN81 154NE 81 154,000 206 187 149 107 70 41/4661/2577/8195/8191/259 6 273/4470 —
SBN100 180NE 100 180,000 245 218 175 125 70 41/4661/2577/8195/8191/259 6 273/4470 —
SBN100 199NE 100 199,000 263 241 193 138 67 41/4661/2577/8195/8191/259 6 273/4470 —
SBN100 200NES 100 200,000 263 241 193 138 72 41/270 615/8201/2211/2611/26273/4603 —
SBN100 200NES A 100 200,000 263 241 193 138 72 41/270 615/8201/2211/2611/26273/4—625
SBN100 250NE 100 250,000 312 303 242 173 72 41/270 615/8201/2211/2611/26273/4603 —
SBN100 250NE A 100 250,000 312 303 242 173 72 41/270 615/8201/2211/2611/26273/4—625
SBN100 275NE 100 275,000 337 333 267 190 72 41/270 615/8201/2211/2611/26273/4603 —
SBN100 275NE A 100 275,000 337 333 267 190 72 41/270 615/8201/2211/2611/26273/4—625
SBN85 310NE 85 310,000 360 376 300 215 73 41/272 615/8201/2211/2611/26273/4603 —
SBN85 310NE A 85 310,000 360 376 300 215 73 41/272 615/8201/2211/2611/26273/4—625
SBN85 366NE 85 366,000 415 444 355 254 73 41/272 621/2221/2213/463 6 273/4725 —
SBN85 366NE A 85 366,000 415 444 355 254 73 41/272 621/2221/2213/463 6 273/4—833
SBN85 390NE 85 390,000 438 473 378 270 73 41/272 621/2221/2213/463 6 273/4725 —
SBN85 390NE A 85 390,000 438 473 378 270 73 41/272 621/2221/2213/463 6 273/4—833
Water Connections In Inches
Inlet Outlet
Model Number Top Front Rear Top Front Rear
S
BN71 120NE
S
BN81 154NE
S
BN100 180NE
S
BN100 199NE
S
BN100 200NES
S
BN100 200NES A
S
BN100 250NE
S
BN100 250NE A
S
BN100 275NE
S
BN100 275NE A
S
BN85 310NE
S
BN85 310NE A
S
BN85 366NE
S
BN85 366NE A
S
BN85 390NE
S
BN85 390NE A
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
11/211/
2
2
2
2
2
2
2
2
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
1
21
/211/
2
2
2
2
2
2
2
2
11/211/211/211/211/211/
11/211/211/211/211/211/
11/211/211/2NA 11/211/
NA 11/211/2NA 11/211/
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Sandblaster® SBN™ Sample Specifications
Gas water heater(s) shall be a State Water Heaters’ Sandblaster®SBN™Model Number,
____________________ , with a gallon storage capacity, an input rate of
Btu/Hour gas, and a recovery rate of gallons per hour at a
degree Fahrenheit temperature rise.
Units shall have hot surface ignition requiring a 120VAC/5AMP power supply, fan-assisted
combustion, and easily removable tubular stainless steel burner tube with individual orifices.
The ignition control shall have integrated self-diagnostic capability and must prove combustion
fan operation for system to operate. The units comply with SCAQMD Rule 1146.2, Southern
California and Texas approved.
quenching as a
protected against premature failure in the following ways:
means of controlling NO
The water heater(s) shall not use flame impingement or flame
emissions. The water heater tank shall be additionally
X
1. A
-year limited warranty against failure due to corrosion, metal fatigue or overheating
caused by the buildup of scale, film or other sediment.
2. Against electrolytic corrosion by multiple, factory-installed anodes.
3. Against failure due to overheating caused by the buildup of scale, film and other sediment
by a self cleaning device. The device shall be properly positioned so that it directs the flow of
inlet water in such a way that microscopic particles of precipitated solids shall be kept in
suspension and exhausted from the water heater on that or successive hot water draws.
The burner(s) shall have an individual orifice for each burner tube and be constructed of tubular
aluminized or stainless steel mounted in an easily removable tray.
Water heater(s) shall have the UL seal of certification, a working pressure of 160 psi, CSA Certified and
ASME rated T&P relief valve, and a 2
3
⁄4˝ x 33⁄4˝ tank inspection port.
For more information on Sandblaster® contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800-365-0024 Toll-free USA
www.statewaterheaters.com
SCGSS000407 August 2008R
197285_SCGSS000407.indd 2197285_SCGSS000407.indd 2 8/15/08 8:57:37 AM8/15/08 8:57:37 AM
Loading...