State Industries GS6 40 YBRT G, GS6 40 HBRT User Manual

SELECT

Residential Gas Water Heaters

State Select® gas water heaters feature patented C3® Technology design, which meets the ANSI Z21.10.1-CSA 4.1 standards for flammable vapor ignition resistance. Select water heaters are available in a variety of heights which can accommodate situations with limited installation space.

Diffuser Dip Tube

• Reduces lime and sediment buildup, maximizes hot water output

• Made from State PEXAN long-term exposure to temperatures up to 400ºF

Green Choice® Gas Burner

• Patented design reduces NOx emissions up to 33%

• Complies with Southern California and Texas requirements

RESIDENTIAL

™

, a cross-linked polymer that can withstand

Easy-to-Light Piezo Ignitor

• For fast “one-hand” pilot ignition

• Standard on all C3 Technology models

Glass-Lined Tank with Aluminum Anode Rod

• For long-lasting protection against rust and corrosion

Durable Brass Tamper-Resistant Drain Valve

Factory-Installed Temperature & Pressure (T&P) Relief Valve

Design-Listed by CSA International

• Certified at 300 PSI test pressure and 150 PSI working pressure

• Listed according to ANSZ21.10.1-CSA 4.1 standards governing storage-type water heaters

• Additional code compliance: UBC, CEC, SBCC, CABO, HUD, BOCA National Codes and 2004 NAECA

C3 Technology® Gas Water Heater Design – See other side

6-Year Limited Tank and Parts Warranty

• Consult written warranty or contact State Water Heaters for

complete information

For more information on Select® contact: State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

SRGSS01206 January 2008R

SELECT

Residential Gas Water Heaters

RESIDENTIAL

PEAK DEMAND APPROX. MODEL OUTPUT ENERGY GALLON NUMBER (1st Hour FACTOR CAPACITY Rating Gallons)

TALL MODELS

GS6 30 YBRT 66 0.62 28 40,000 41 8 59-5 /8 55-1/4 16 13-3/8 8 49-7/8 3 or 4 112

GS6 40 YBRT 71 0.59 38 40,000 39 8 57-5/8 53-1/4 18-1/2 13-3/8 8 47-3/8 3 or 4 126

GS6 50 YBRT 91 0.58 50 40,000 41 8 60 -7/8 56-1/2 20 13-3/ 8 8 50-3 /8 3 or 4 160

SHORT MODELS

GS6 30 YBRS 66 0.61 30 40,000 40 8 48-1/8 43-3 /4 18-1/2 13-3/8 8 36-5/8 3 or 4 122

GS6 40 YBRS 71 0.59 40 40,000 41 8 51-5/8 47-1/4 20 13-3/8 8 41 3 or 4 139

GS6 50 YBRS 80 0.58 50 40,000 41 16 53-1/4 48-3/4 24 13-3/ 8 8 43-1/2 3 or 4 168

Recoveries are rounded to nearest gallon. For 10-Year Tank and 6-Year Parts Warranty, change "6" to "X" in Model Number (GSX 40 YBRT). Water Connections – 3/4" male on all models except GS6 50 YBRT (3/4" female). When ordering Propane, change "Y" to "H" in model number (GS6 40 HBRT). External heat tr ap nipples ar e supplied on all models e xcept GS6 50 Y BRT. When or dering top-mount ed T&P Valve, add "G" to model number (GS6 40 YBRT G). † Propa ne Gas – 37,000 BTU models. **All models are 1-inch foam except GS6 50 YBRS (2-inch foam).

BTU INPUT RECOVERY

PER HOUR 90°F RISE

NATURAL† GALLONS

VALUE**

A B C D E F

DIMENSIONS IN INCHES

DRAFT

HOOD

OUTLET

SHIPPING

WEIGHT

(LBS)

Flammable Vapor Ignition Resistant C3 Technology® Water Heaters

Corderite Combustion Containment (C3) design meets American National Standards Institute standards (ANS Z21.10.1-CSA 4.1) that deal with the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.

Covered by four U.S. patents, C3 Technology gas water heaters feature a sealed combustion chamber with air intake screen and a fireproof Corderite flame arrestor built into the water heater base. In addition, a Thermal Cutoff (TCO) device, integral with the thermocouple, is designed to shut off gas flow to the burner and pilot if poor combustion is detected.

A. Easy-to-light

In the unlikely event that ﬂammable vapors accidentally enter the combustion chamber, the Corderite ﬂame arrestor is designed so any ﬂames burn off the top surface and cannot escape down through the arrestor.

Piezo Ignitor

B. View port for easy inspection of burner inside sealed combustion chamber

For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024.

State Industries, Inc. reserves the right to make product changes or improvements without prior notice.

For more information on Select® contact: State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

SRGSS01206 January 2008R

*Location for optional top-mounted T&P Valve,

if ordered from factory. To order, add “G” to model number (GS6 40 YBRT G