State Industries GPG85 540 NEA User Manual

For Additional Technical Information,

PHONE 800-365-0024

STATE WATER HEATERS 500 Tennessee Waltz Parkway, Ashland City, TN 37015 www.statewaterheaters.com

TITAN

™

Low-NOx Commercial Gas Water Heaters

POWERED BURNER

For medium-demand commercial applications, State Titan™ (GPG and GPV) commercial gas water heaters offer precise powered-burner performance, plus flexible venting options including conventional atmospheric venting, sidewall venting or direct venting. Professional start-up service is also available from State on these Titan units to help ensure optimum performance.

Powered Gas Low-NOx Burner (Natural Gas Only)

• Premix burner operation includes internal Flue Gas Recirculation (FGR)

• Safety features: Internal blocked flue sensor, separate pilot system, internal thermal cutoff and anti-flashback barrier

Three Venting Options

• Conventional atmospheric vertical venting on GPG models, with barometric draft regulating damper. Order Vent Kit Part # 170777-005

• Horizontal atmospheric sidewall venting or direct venting on GPV models

• For sidewall venting order Vent Kit Part # 192049-000

• For direct-venting order Vent Kit Part # 192050-002

Automatic Controls

• Safety shut-off, high-temperature limit control

• Dual thermostat for accurate temperature adjustment from 120ºF to 180ºF

Patented “Dome Design” Combustion

• Draft-equalizing dome balances pressure inside combustion chamber for optimum flue loading and efficient heat transfer

Adjustable Damper for High-Altitude Installations

• Air intake damper easily reset for high-altitude installation by authorized start-up agent

ASME Tank Construction – Rated Working Pressure 160 psi

Factory-Installed AGA/ASME Temperature and Pressure Relief Valve

Glass-Lined Tank

• With multiple anode rods for long-term protection against corrosion

Flame Inspection Port

Handhole Cleanout

• For easy removal of sediment from tank bottom

Meets ASHRAE/IESNA 90.1-1999 Requirements

• Also meets SCAQMD low-NOx Rule 1146.2

Three-Year Limited Tank Warranty

• For complete warranty information, consult written warranty shipped with water heater, or contact State Water Heaters

Page 1 of 2

SCGSS00205

March 2007R

For Additional Technical Information,

PHONE 800-365-0024

STATE WATER HEATERS 500 Tennessee Waltz Parkway, Ashland City, TN 37015 www.statewaterheaters.com

March 2007R

For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024.

State Industries, Inc. reserves the right to make product changes or improvements without prior notice.

TITAN

™

Low-NOx Commercial Gas Water Heaters

DIMENSIONS AND WEIGHT – ALL MODELS

CAPACITY, INPUT AND OUTPUT

POWERED BURNER

SUGGESTED SPECIFICATION

Water heater(s) shall be State Model ________________ or equal, with maximum storage capacity of 85 gallons, an input rating of ___________________ BTU/Hr., a recovery rating of ____ GPH at 100ºF temperature rise, and minimum thermal efficiency of 80%. Heater(s) shall meet ASHRAE/IESNA 90.1-1999 requirements for thermal efficiency and standby loss, and meet SCAQMD R1146.2 low-NOx requirements. In addition, heater(s) shall: 1) Include a powered gas burner, redundant main gas valves, gas pressure regulator and flame inspection port. 2) Include a high-temperature limit control, dual-bulb thermostat for accurate temperature control and antistacking compensation and a factory-installed AGA rated temperature and pressure relief valve. 3) Be equipped with 1-1/2" NPT water inlet and outlet and a boiler-type handhole cleanout. 4) Shall be constructed and stamped in accordance with ASME Boiler and Pressure Vessel Code and be so marked for a maximum working pressure of 160 psi. 5) Have a glass-lined steel tank with multiple anodes for corrosion protection, and polyurethane foam insulation. 6) Tank shall have a 3-year limited warranty against corrosion as outlined in the written warranty.

Venting: GPG heater(s) shall be supplied with a Barometric Draft Regulator for conventional atmospheric venting. GPV heater(s) shall be supplied with an optional vent kit allowing for horizontal sidewall venting or direct venting.

Burner and Controls: Burner(s) shall be pre-mix design, with internal FGR and thermal cutoff, separate spark pilot ignition system, integral blocked flue sensor, glass view port, main gas regulator, automatic gas valve, manual test cock and manual gas shutoff. Burner(s) must be factory-installed, tested and started by an Authorized State Startup Agent before being placed into operation.

Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 5% for every 1,000 feet above sea level. Current Draw (120V, 60Hz, 1 Phase): 6.0 Amps

*D dimension is for atmospheric vent size (GPG models). **E dimension is for direct and sidewall vent size (GPV models). ***Minimum gas supply pipe is 1-1/4". See Reference Manual, Table 7 for gas supply pipe size.

MODEL

NUMBER

GPG85 540 NEA GPV85 540 NEA

GPG85 650 NEA GPV85 650 NEA GPG85 740 NEA GPV85 740 NEA

FIRST HOUR

RATING

100° F

RISE

583

2206.7

690

2611.7 778

2944.7

TAN K

SIZE

321.7

321.7 85

321.7

BTU

INPUT

PER

HOUR

540,000

650,000

740,000

Gallons

Litres

U.S. Gallons

Litres

U.S. Gallons

Litres

U.S. Gallons

Litres

GPH

LPH

GPH

LPH

GPH

LPH

GPH

LPH

40°F

4°C

1309

4954.6

1579

5976.5 1794

6790.3

100°F

56°C

523

1979.6

630

2384.6 718

2717.6

140°F

78°C

374

1415.6

450

1703.3 512

1937.9

RECOVERY-GALLONS

PER HOUR AT °F

TEMPERATURE RISE

Inches

950 Lbs.

431.8 Kg

GAS

CONN.***

80-3/4

205.1

185.4

32-1/4

81.9

22.9

26-1/2

67.3

26-1/2

67.3

236.2

29-1/2

74.9

48-1/2

123.2

DIMENSIONS

SHIPPING

WEIGHT

Page 2 of 2