State CSB120 User Manual
COMMERCIAL
MODELS
CSB 52, 82, 120
SURFACE MOUNT THERMOSTATS
SANDBLASTER
COMMERCIAL ELECTRIC WATER HEATERS
Designed for use as a recovery heater having its own storage tank. Note: Not recommended
for sanitizing water application.
FEATURES
Meets or exceeds the requirements of ASHRAE 90.1b-1992 and ASHRAE/IESNA 90.1-2004.
GOLD ELEMENTS - CSB models ship with the gold plated elements (see element
availability chart on back). Patented gold elements provide long life and superior scaling
resistance. Low watt density means lower surface temperature to minimize scale buildup
and more surface to heat water. Gold elements carry a one-year warranty against failure
due to lime scale build-up.
GLASS-LINED TANK - Three sizes: 50, 80 and 119 gallon capacity. Tank interior is
coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034
kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is
vermin proof.
FUSING - Protects all elements, thermostats, and internal wiring circuits against excess
current flow. Meets National Electrical Code requirements that non-ASME tanks must
have internal fusing when current draw exceeds 48 amps.
STANDARD VOLTAGES - 208, 240 and 480V single-phase and three-phase delta.
Convertible from three-phase to single-phase (in field) and vice versa. 277V single-phase
also available.
(OPTIONAL)
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SCESS00508 September 2010R
TERMINAL BLOCK - Factory installed. Just bring the service to the heater and connect to block.
CONTROLS - One temperature control (adjustable through a range of 120° to 180°F)
and manual reset high temperature cut-off per element. Thermostat step control may
be achieved by varying settings on individual temperature controls. Located behind
hinged control compartment door for quick, easy access.
OTHER STANDARD FEATURES -
Ŷ
Surface mounted thermostats
Two anode rods for maximum corrosion protection Ŷ Cabinet has bonderized undercoat
with baked enamel finish Ŷ Bottom inlet and top outlet openings Ŷ Brass drain valve Ŷ
CSA / ASME temperature and pressure relief valve Ŷ Single panel control box. Ŷ THREE
YEAR LIMITED TANK WARRANTY - For complete warranty information, consult written
warranty or contact State Water Heaters.
Ŷ
Simplified circuitry, color coded for ease of service Ŷ
OPTIONS -
Ŷ
UL and cUL listed conversion kits to adjust voltage and kW requirements in the field
before and after installation Ŷ ASME 150 psi tank construction Ŷ International voltages 220, 380, 400, 415, 575, and 600 volts, three phase available with Y connected elements
Ŷ
MANIFOLD KITS - for multiple tank installations. Two heaters -part # 9003429205,
three heaters- part # 9003430205 and four heaters- part # 9003431205
SOLID.STATE.
COMMERCIAL
RECOVERY RATE IN GALLONS PER HOUR AT TEMPERATURE RISE OF
Standard
kW Input
13.5 46,075 184
40.5 138,226 554
Figured at 1 kW (3413 BTU) = 4.1 Gallons at 100°F temperature rise.
BTU/ Hour3O°
6 20,478 82
9 30,717 123
12 40,956 164
15 51,195 205
18 61,434 246
24 81,912 328
27 92,151 369
30 102,390 410
36 122,868 492
45 153,585 615
54 184,302 738
17
310
4659234974279622335319946174411553714034127311162810726100
620
698
775
930
1241
1396
1551
1861
2094
2326
2791
F
°
F
°
F
°
F
°
F
°
F
°
F
°
F
°
F
°
40
5O
60
70
8O
9O
100
22
28
33
39
45
°
C
°
C
°
C
°
C
°
62
2334916641155351333111627103
123
46598372823107026661233552074918645169411553814335133
138
111
523
419923497929969262622335520950190461744316140150
154
582
184
698
246
930
276
1047
307
1163
369
1396
418
1570
461
1745
554
2094
102
123
465
3888833277291682586123356211511944714944166
148
123
558
465
197
164
744
620
221
185
938
609
246
205
930
775
295
246
1117
930
332
277
1256
1047
369
307
1398
1163
443
359
1675
1396
C
105
39992349823107427967254622335721553199
140
532
158
509
176
665
211
798
237
897
263
997
316
1196
50
°
C
°
C
123
109
465
4149837290338823107628670266
138
123
523
465
154
137
582
517
184
164
698
620
208
185
785
698
230
205
872
755
277
246
1047
930
110
56
61
°
C
25 9322852178197218
111
101
410
391923408532279299
123
112
465
423
148
134
556
508
166
151
628
634
184
168
698
634
201
221
761
837
F
120
67
°
C
°
C
102
3889535888332
123
465
138
582
154
582
185
696
130
72
113
429
128
537
142
537
170
644
°
F
°
F
140
78
°
C
°
C
66
105
399
119
498
132
498
158
598
142
153
158.1
Element
Wattage
Dimensions
21 3/4
55.2
25 1/2
64.8
29 1/2
75.0
Inlet/
Outlet (NPT)
27
68.6
78.7
88.9
1 1/4
1 1/4
1 1/4
31
35
Approx. Ship.
Wt. (Lbs.)
3.2 265 120
3.2 280 127
3.2 390 177
Full Load Current In Amperes
Single Phase Three Phase
kW
Input
Model
Number
CSB 52**SFE
CSB 82**SFE
CSB 120**SFE 119 450
Model Numbers
Tank Capacity in Gallons
50 80 119 208V 240V 277V 480V 208V 240V 480V
Tank
Capacity
gal.
litre
50 189
80 300
ABC
in. cm in. cm in. cm in. cm Ib kg
55 3/4
60 1/4
62 1/4
Number
Of
Elements
6 CSB 52 6 SFE CSB 82 6 SFE CSB 120 6 SFE 3 2,000 28.8 25.0 21.7 12.5 16.7 14.4 7.2
9 CSB 52 9 SFE CSB 82 9 SFE CSB 120 9 SFE 3 3,000 43.3 37.5 **32.5 18.8 25.0 21.7 10.8
12 CSB 52 12 SFE CSB 82 12 SFE CSB 120 12 SFE 3 4,000 57.7 50.0 43.3 25.0 33.3 28.9 14.4
13.5 CSB 52 135 SFE CSB 82 135 SFE CSB 120 135 SFE 3 4,500 64.9 56.3 **48.7 28.1 37.5 32.5 16.2
15 CSB 52 15 SFE CSB 82 15 SFE CSB 120 15 SFE 3 5,000 72.1 62.5 **54.2 31.3 41.6 36.1 18.0
18 CSB 52 18 SFE CSB 82 18 SFE CSB 120 18 SFE 3* 6,000 86.5 75.0 65.0 37.5 50.0 43.3 21.7
24 CSB 52 24 SFE CSB 82 24 SFE CSB 120 24 SFE 6 4,000 115.4 100.0 86.6 50.0 66.6 57.7 28.9
27 CSB 52 27 SFE CSB 82 27 SFE CSB 120 27 SFE 6 4,500 129.8 112.5 **97.5 56.3 74.9 65.0 32.5
30 CSB 52 30 SFE CSB 82 30 SFE CSB 120 30 SFE 6 5,000 144.2 125.0 **108.3 62.5 83.3 72.2 36.1
36 CSB 52 36 SFE CSB 82 36 SFE CSB 120 36 SFE 6* 6,000 173.1 150.0 130.0 75.0 99.9 86.6 43.3
40.5 N/A CSB 82 405 SFE CSB 120 405 SFE 9 4,500 194.7 168.8 **146.2 84.4 112.4 97.4 48.7
45 N/A CSB 82 45 SFE CSB 120 45 SFE 9 5,000 216.3 187.5 **162.5 93.8 124.9 108.3 54.1
54 N/A CSB 82 54 SFE CSB 120 54 SFE 9 6,000 N/A 225.0 194.9 112.5 149.9 129.9 65.0
*208 volt models may contain three (3) additional elements. ** Elements available in incoloy only.
SUGGESTED SPECIFICATION
The heater(s) shall be SandBlaster CSB Series Commercial Electric Model Number ______________ as manufactured by State Industries shall be rated at
____________kW,_______volts, ____________ phase, 60 cycle AC, and listed by Underwriters’ Laboratories and approved to the NSF Standard 5 by UL. Tank(s) shall be
________ gallon capacity. Tanks shall be 50, 80 and 119 gallon capacity and shall have 150 psi working pressure and be equipped with extruded high density anode.
All internal surfac es of the heater(s) exposed to water shall be glass-lined with an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range
of 1400°F to 1600°F. Electric heating elements shall be gold plated low watt density screw-in type. Each element shall be controlled by an individually mounted thermostat and high temperature
cut-off switch. All internal circuits shall be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance
through hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located in the front for ease
of servicing. Heater tank shall have a three year limited warranty as outlined in the written warranty. Manufacturer shall supply ASME rated temperature and pressure relief valve. Fully illustrated
instruction manual to be included. Meets ASHRAE 90.1b -1992 and ASHR AE/IESNA 90.1-2004.
For more information on this product contact:
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015
800.365.0024 Toll-free USA
www.statewaterheaters.com
SCESS00508
2010RSeptember
SOLID.STATE.
Loading...