STARVILLE MANIAC XH-1, MANIAC XH-2, MANIAC XH-3 Owner's Manual

Owner‘s Manual

HALLUCINATION
DESIGN

FASCINATION

XH-1 XH-2 XH-3

2

Thanks a lot for purchasing our Stairville effect light.
Hallucination is a powerful 250W light, featuring a slow rotating effects

wheel and a static effect glass. It projects a beam through effect glasses
onto a multicoloured dichroic dish, creating a hallucinatory effect.

Design is a powerful 250W effect lights, featuring a gobo wheel and multi­coloured dichroic dish that rotates back and forth, creating dynamic swiv­elling effects.

Fascination is a powerful 250W background creation effect which projects
a beam through a replaceable, rotating glass effect wheel onto a multicol­oured dichroic dish, creating an ever changing atmosphere.

Add a selector switch to select between auto, sound activation, or static

function. This xture is perfect for clubs, pubs, bars, parties, and mobile

DJs.

Table of Contents

1. Safety Instruction .......................................................................... 3

2. Operating Elements ...................................................................... 4

3. Operation and technical Specification .......................................... 5

4. Exchanging rotating Gobos / Lamp .............................................. 5

5. Beam Angle .................................................................................. 6

6. Troubleshooting ............................................................................ 6

7. Fixture Cleaning ............................................................................ 6

8. Disposal ........................................................................................ 7

9. EC Declaration of Conformity ....................................................... 7

3

1. Safety Instruction

You have to carefully read the instruction, which includes impor­tant information about the installation, usage and maintenance.

• Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that he also receives this instruction booklet.

• Unpack and check carefully there is no transportation damage before
using the unit.

• Before operating, ensure that the voltage and frequency of power sup­ply match the power requirements of the unit as stated in this manual.

• It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.

• The unit is for indoor use only. Use it only in a dry location. Exposing the
device to rain or moisture would cause the risk of electrical shock or re.

• The unit must be installed in a location with adequate ventilation, at

least 50 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked.

• Disconnect the device from the mains power before any servicing or
maintenance.

• Replace fuse/lamp only with the same type. Do not use any other type
of lamp.

• Keep any ammable material away from the unit while it is operating.
Otherwise you run the risk of causing a re.

• Use safety cables when xing this unit. Don’t handle the unit by taking

its head only, but always by taking its base.

• Maximum ambient temperature is TA: 40°C. Don’t operate it where the

temperature is higher than this.

• Unit surface temperature may reach up to 85°C. Don’t touch the hous­ing barehanded during its operation. Turn off the power and allow about
15 minutes for the unit to cool down before replacing bulb or servicing

as the unit could be very hot. Also don’t touch the bulb with bare ngers,

as it is very hot after using.

• Hot lamp explosion hazard! Do not open the unit within ve minutes af­ter switching off.

• Do not start the unit without bulb enclosure or if the housing is damaged.

• The housing, the lenses, or the ultraviolet lter must be replaced if they

are visibly damaged.

• In the event of serious operating problem, stop using the unit imme­diately. Never try to repair the unit by yourself. Repairs carried out by