STARVILLE DMX-Master MK II ENC, DMX-Master I User Manual
DMX-Master I,
DMX-Master MK II ENC
DMX controller
user manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
E-mail: info@thomann.de
Internet: www.thomann.de
29.07.2016, ID: 168962, 236071 | SW B3.0V3.3
Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 10
3 Features....................................................................................................................................................... 14
4 Installation.................................................................................................................................................. 16
5 Setup.............................................................................................................................................................. 18
6 Connections and controls................................................................................................................... 19
7 Basics............................................................................................................................................................. 31
8 Operating.................................................................................................................................................... 34
8.1 Introduction....................................................................................................................................... 34
8.2 Enabling programming mode..................................................................................................... 34
8.3 Programming scenes...................................................................................................................... 35
8.4 Programming chase........................................................................................................................ 42
Table of contents
DMX-Master I, DMX-Master MK II ENC
3
8.5 Assigning / reversing DMX channels........................................................................................ 47
8.6 Calling up scenes.............................................................................................................................. 55
8.7 Calling chases.................................................................................................................................... 57
8.8 The MIDI functions........................................................................................................................... 59
8.9 Sending data...................................................................................................................................... 62
8.10 Receiving data................................................................................................................................ 63
9 Technical specifications....................................................................................................................... 64
10 Plug and connection assignment.................................................................................................... 65
11 Protecting the environment.............................................................................................................. 66
Table of contents
DMX controller
4
1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
DMX-Master I, DMX-Master MK II ENC
5
1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search
Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service
If you have any problems with the device the customer service will
gladly assist you.
General information
DMX controller
6
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’.
Letterings
Displays
General information
DMX-Master I, DMX-Master MK II ENC
7
The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ð
Automatic operation is started.
3. Switch off the device.
References to other locations in this manual are identified by an arrow and the specified page
number. In the electronic version of the manual, you can click the cross-reference to jump to
the specified location.
Example: See Ä ‘Cross-references’ on page 8.
Instructions
Cross-references
General information
DMX controller
8
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
DMX-Master I, DMX-Master MK II ENC
9
2 Safety instructions
This device is used to control spotlights, dimmers, lighting effects equipment, Moving Heads
or other DMX-controlled devices. The device is designed for professional use and is not suit‐
able for use in households. Use the device only as described in this user manual. Any other use
or use under other operating conditions is considered to be improper and may result in per‐
sonal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
DMX controller
10
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Safety
Safety instructions
DMX-Master I, DMX-Master MK II ENC
11
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
fire.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
DMX controller
12
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Safety instructions
DMX-Master I, DMX-Master MK II ENC
13
3 Features
Special features of the device:
n 192 DMX channels
n 12 units with up to 16 DMX channels operable
n 30 banks with 8 freely programmable scenes
n Six Chase programmes with up to 240 scenes from 30 banks
n Eight faders for manual control
n All data interchangeable between two units
n Auto programmes (scenes and chases), controlled by Wait Time knob (or Tap Sync) and
Fade Time knob
n Stepless fade time setting (0-30 seconds)
n Two encoder wheels for precise adjustment of PAN and TILT (DMX Master MK-II ENC)
n Fine tuning for PAN and TILT
n Inverted DMX channels allow reverse output control for the sliders
n Assigned or reversed DMX channel preview
n 8 / 16 channel mode for assigned or reversed DMX channels
n Blackout master
n Stand-alone mode
Features
DMX controller
14
n Manual overriding of scenes in chases
n Sound control
n MIDI control for banks, chases and blackout
n LCD
n DMX polarity adjustable
n Memory retention on power failure
n Auto addressing
Features
DMX-Master I, DMX-Master MK II ENC
15
4 Installation
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Installation
DMX controller
16
Wiring diagram for fog
machines
Installation
DMX-Master I, DMX-Master MK II ENC
17
5 Setup
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the included power adapter to the 9V connector of the unit and then plug the power
adapter into a wall outlet.
Turn on the device using the main switch on the rear panel. Turn on the device using the main
switch at the back side. After turning the device on the displays shows the software version
and the operation mode for a short time. The related display LEDs light up.
Connecting the power supply
Turning the unit on
Setup
DMX controller
18
6 Connections and controls
Front panel DMX Master I
Connections and controls
DMX-Master I, DMX-Master MK II ENC
19
Front panel DMX Master MK-II ENC
Connections and controls
DMX controller
20
1 [SCANNERS]
12 scanners with 16 DMX channels and fader control.
Press one of the scanner buttons to turn on the manual fader control. Press the scanner button again to turn it off.
The LED next to the button lights up or goes out to indicate your selection. For channel assignment, see table below.
2 [SCENES]
Scene buttons.
Press one of the Scene buttons to load or save scenes. A maximum of 240 scenes can be saved.
3 Fader.
Use these knobs to control the intensity of channels 1-8 or 9-16, depending on which Page is selected.
4 [PAGE SELECT]
Page select button.
To select the desired page A (1-8) or page B (9-16).
Connections and controls
DMX-Master I, DMX-Master MK II ENC
21
Loading...