STARVILLE DJ-X 16 Owner's Manual

www.thomann.de

1

Owner‘s Manual

DMX CONTROLLER

DJ-X 16

STAIRVILLE • DJ-X 16 DMX CONTROLLER

2

www.thomann.de

Thank you for choosing our 16 channel DMX controller. Please read
this user manual carefully and follow the instructions to avoid danger or
damage to the unit due to mishandling. Keep this user guide for future
reference. If you give the unit to another user, be sure that he also
receives this instruction booklet.

Safety instruction

You have to carefully read the instruction, which includes important
information about the installation, usage and maintenance, BEFORE
operating this device.

X This device is exclusively meant to be used as a lighting control unit

within the limits given in this manual. Using it in any other way you risk
electric shock and warranty will become void.

X Never sever or manipulate any part of the mains connection. If a power

cord is provided with an earth lead, this is mandatory to ensure safe
operation! Otherwise a LIFE THREATENING situation exists!

X Unpack and check carefully there is no transportation damage before

using the unit. Never put a damaged device into operation.

X Before operating, ensure that the voltage and frequency of power supply

match the power requirements of the unit as stated in this manual.

X The unit is for indoor use only. Use it only in a dry location. Exposing the

device to rain or moisture would cause the risk of electrical shock or re.

X DO NOT let any liquids or objects enter the unit. Should any liquid

be spilled on the unit, DISCONNECT the power supply to the unit
immediately and contact the service company.

X The unit must only be installed in a location with adequate ventilation.

Be sure that no ventilation slots are blocked.

X Disconnect the device from the mains power before any servicing or

maintenance.

X Notice regarding power disconnection:

To disconnect the device from the power source the mains adaptor must
be removed from the power socket. For this reason the device must
be placed in a position where a constant unobstructed access to the
power socket is assured, thus in an emergency situation you are able to

immediately pull out the mains adaptor. To eliminate the risk of re you

must completely disconnect the mains adaptor from the power socket
after the device has been used.

www.thomann.de

3

X Always grasp the mains adaptor by the plug. Do not pull on the adaptor

cord and never touch the mains adaptor with wet hands as this could
result in a short circuit or an electrical shock. Do not place the device,
speaker cabinets or anything else on the adaptor cord and make sure
that it does not become clamped. Place the adaptor cord in a position

where it can not be trod on. A damaged mains adaptor can cause a re

or an electrical shock. Check the mains adaptor and the adaptor cable
from time to time. Should it become damaged contact our customer
service centre to have it replaced.

X You have to ensure, that the mains adaptor never becomes wet during

operation.

X Before a storm and/or a thunderstorm with a risk of lightning, disconnect

the device from the mains power supply.

X Under no circumstances may you open the housing of the device or the

mains adaptor. Should you do so your safety would not be assured and
the warranty will become void. There are no operational components
whatsoever inside, only dangerous voltages that can give you a

deadly shock!

X NEVER use the unit under the following conditions:

> In places subject to vibrations or bumps.
> In places with a temperature of over 45 °C or less than 2 °C.
> In places subject to excessive dryness or humidity (ideal conditions
are between 35% and 80%).

X Never submerse the device in water or any other liquid. Only wipe it

with a slightly damp cloth.

X Never operate the device near ames, ammable, explosive materials,

or hot surfaces. Otherwise you run the risk of causing a re.

X Never leave this device running unattended.
X This appliance must not be used by individuals (including children) with

restricted physical, physiological or intellectual abilities or deciencies in

experience and/or knowledge unless they are supervised by a person
responsible for their safety or receive from this person instruction in how
the appliance is to be used.

X Keep children away from the device and mains adaptor! Children frequently

underestimate the dangers of electrical devices. Also keep the plastic
packaging well away from small children. There is a risk of suffocation!

X In the event of serious operating problems, stop using the unit

immediately. Never try to dismantle, repair or modify the unit by
yourself. Otherwise warranty becomes void. Repairs carried out by
unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance centre.

STAIRVILLE • DJ-X 16 DMX CONTROLLER

4

www.thomann.de

Introduction

The DJ-X 16 is a 16 channel programming console with MIDI & DMX
interface. The DJ-X 16 features include: 60 built-in patterns & 30 variable
programs with max. 99 steps, MANUAL/AUTO/AUDIO/TAP SYNC/CROSS
modes. Specially, the DJ-X 16 is equipped with PEROM to guarantee data
security.

Control elements

On front panel

1. Channel indicators

2. Channel fader Controls the level in ASSIGN PROGRAM
mode or the channels in MANUAL mode.

3. LATCH button (CH 9~16) It functions as ASSIGN LATCH or channel
LATCH in manual mode.

4. FLASH button (CH 1~16) It functions as ASSIGN FLASH or channel
FLASH in MANUAL mode.
SHIFT+FLASH button:
Changes the BLIND setting in chase mode
and when BLIND ENABLE indicator is lit.

5. MASTER fader It functions as a master fader for faders 1 to
8 or in chase mode and CROSS FUNCTION
as a master for the pattern. The patterns

www.thomann.de

5

are executed step by step by moving the
MASTER fader.

6. M indicator Indicating the MASTER status for faders 1 to

8.

7. A & B indicators Indicating the MASTER status of two
neighbouring steps in cross mode.

8. LEVEL knob This knob functions as a master for the
pattern in chase mode.

9. SPEED/FADE TIME knob This knob controls the chasing speed from
10 steps/second to 1 step/5 minutes and
time from 0.1 second to 5 minutes in chase
mode.

10. AUDIO knob This knob controls the sensitivity of music
rhythms in audio chase mode.

11. LCD It shows the present operating mode and
program options.

12. CROSS button Press this button to enter or leave CROSS
mode in chase mode and when CROSS ON
indicator is lit.

13. PATTERN  button Press to increase the left two digits by one.
Pressing this button for more than one
second increases the digits quickly from
present counter till the maximum and then
increases from the minimum cyclically.
SHIFT + BUTTON SETUP:
Pressing SHIFT + BUTTON SETUP together
sets the channel fader; LATCH button and
FLASH button. Each pressing makes a new
setting, and the matching indicator is lit.

14. PATTERN  button Press to decrease the left two digits by
one. Pressing this button for more than one
second decreases the digits quickly from
present counter till the minimum and then
decreases the digits quickly from present
counter till the maximum an then decreases
from the maximum cyclically.
SHIFT + FADE TIME SETUP:
Pressing SHIFT + FADE TIME SETUP sets
the fade time. When the NO FADE TIME
indicator is lit, fade time is disabled. If STEP
TIME indicator is lit, fade time is set by the
SPEED knob and is identical to the step
time.