How it Works
Star Trac
Loading...
E-TRi
User Manual 2
52 pgs3.28 Mb0
Owner's Manual
42 pgs7.59 Mb0
User Manual
42 pgs7.48 Mb0
User Manual
52 pgs3.41 Mb0

Star Trac E-TRi User Manual

STAR TRAC FITNESS
TM
PERSONAL VIEWING SCREEN
O WNER’ S M ANUAL
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before You Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Check Facilities Preparedness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Input Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Power Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STAR TRAC Personal Viewing Screen (PVS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NTSC/ATSC Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PAL/SECAM Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Installing Your STAR TRAC Personal Viewing Screen (PVS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E-UB, E-RB, E-TBT, and E-ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
E-TR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting Up Your STAR TRAC Personal Viewing Screen (PVS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
NTSC/ATSC (typically US, Japan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Accessing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Setting Up the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting Image Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Adjusting Audio Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
PAL/SECAM (typically Europe, Middle East) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Maintenance Mode for E-TRi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Maintenance Mode for E-TBTi, E-STi, E-RBi, and E-UBi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Accessing On Screen Display Menus (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Picture Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Sound Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Channel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
FAQ’s and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cleaning the PVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Replace the Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
T
ABLE OF
C
ONTENTS
Copyright 2008. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners. Printed in the USA.
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
3
TM
E-UBi, E-RBi, E-STi, AND E-TBTi
E-TRi
iPULSE
TM
i
PULSE
Thank you for adding the STAR TRAC PERSONAL VIEWING SCREEN (PVS) to your Star Trac Purchase. The Personal Viewing Screen has been designed to provide the user with the most rewarding experience based upon the carefully planned features it possess. The design elements of this Personal Viewing Screen will provide you with a comfortable, intu­itive, safe and reliable experience, guiding you to a habit-forming lifestyle. Star Trac's mission is to provide products to mold lifelong habits for health and fitness.
ABOUT THIS MANUAL
This manual is applicable to the STAR TRAC E-UB UPRIGHT BIKE, E-RB RECUMBENT BIKE, E-ST STEPPER, E-TBT TOTAL BODY TRAINER, and the E-TR TREADMILL. The manual is divided into eight sections, as follows:
Introduction
Provides an overview of each section within the manual.
Before You Get Started
Provides guidelines to help you have a successful installation.
Warnings and Cautions
Helpful safety tips to keep you out of harms way.
STAR TRAC Personal Viewing Screen (PVS)
Provides a description of what you will find in your PVS kit.
Installing Your STAR TRAC Personal Viewing Screen (PVS)
Provides a step-by-step instruction set for installing your PVS on the E-UB, E-RB, E-ST, E-TBT and E-TR.
Setting Up Your STAR TRAC Personal Viewing Screen (PVS)
Provides step-by-step instruction set for configuring your PVS with either the NTSC/ATSC or PAL/SECAM screen.
FAQ’s and Troubleshooting
Frequently asked questions and troubleshooting methods to help solve problems that may occur with your PVS.
Regulatory Information
Provides regulatory information for the Star Trac Personal Viewing Screen.
I
NTRODUCTION
4 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SMANUAL
CHECK FACILITIES PREPAREDNESS
For a proper installation, please read this guide thoroughly and follow the instructions. Star Trac’s goal is to help you have
a successful and reliable installation, for this reason we have come up with some helpful tips and check list to accomplish
this goal.
EQUIPMENT LAYOUT
Check to see that the equipment you will be adding the PVS to are place where they will be used. It is recommended that
you follow your installation guides for each one of your Star Trac pieces of equipment in making sure that there is ample
space around them to insure a safe and enjoyable experience.
INPUT SIGNAL
In the world of entertainment today you have many choices. Star Trac recommends you know what type of video signal
(cable, analogue, digital, satellite, antenna) is in the club facility and if it has a good signal. Don’t forget every installation
is different. Check to see that you have ample video coaxial cable connections to the locations where the PVS will be
installed.
CABLING
When Radio Frequency signals travel through cabling the signal will degrade over distance. Connectors may degrade the
signal as well. Check each output before connecting to your PVS and make sure you have a clean strong signal to insure
an enjoyable experience. The Star Trac PVS requires a minimum signal strength of 45dBmV for analogue channels, and
40% for digital channels. Your club may require signal amplifiers to achieve a good strong signal. Star Trac recommends
you use a qualified installer for your Audio Visual needs.
ELECTRICAL RECEPTACLES
The Personal Viewing Screen requires a plug-in 60 watt power supply to operate (included). Check with your club facility
to ensure ample electrical receptacles are placed next to the equipment for a safe and proper install. Check with your con-
tractor to make sure you have enough power.
B
EFORE
Y
OU
G
ETSTARTED
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SMANUAL
5
This lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.
CAUTION:
These service instructions are for use by qualified service personnel only, to reduce the risk of electric shock, DO NOT perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
W
ARNINGS AND
C
AUTIONS
6 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SMANUAL
WARNING:
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
RIESGO DE CHOQUE ELECTRICO
NE PAS OUVRIR
PRECAUCION
NO ABRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT REMOVE COVER ( OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
This STAR TRAC Personal Viewing Screen has been engineered and manufactured to assure your safety. Before using this product, be sure to read your user’s manual in order to maximize the life of your display.
DO NOT disassemble the PVS.
Any Un-authorized maintenance will void the warrenty. Un-experienced technicians can cause serious damage, electric shock, and other hazards.
Contact your dealer or an experienced technician for repair.
DO NOT place sharp tools such as pin or metallic object near the display.
May result in scratching the surface of the monitor as well as the frame.
Keep your monitor away from liquid or a humid place.
May cause electric shock and damage the display.
DO NOT spray any fluid directly on the surface of the monitor.
Spray the cleaner fluid on a soft cloth to wipe the surface of the monitor.
When strange sound or smoke occurs, be sure to unplug your power cord.
These problems can cause a serious electric shock and other hazards.
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
7
UNPACK YOUR PERSONAL VIEWING SCREEN
Inspect the shipping carton for any parts that may be missing BEFORE discarding the carton. Items can shift during transportation, and may be accidentally discarded with the carton. If any parts are missing, please contact Star Trac Product Support at 800-503-1221. Have the serial number of the PVS, and a list of the missing parts ready so they may be shipped to you. The Personal Viewing Screen is shipped in one box separate from your exercise equipment. The following items will be in the box. PVS kits are available in two different signal formats; NTSC/ATSC (typically US, Japan) and PAL/SECAM (typically Europe, Middle East), make sure the kit you have is appropriate for the country of the club facility.
NTSC/ATSC Kit (US, Japan)
NOTE: there are 4 different kits ie. E-TRi, E-TBTi/E-UBi, E-RBi, AND E-STi.
• PVS assembly with Mounting Bracket, Cables, and Display Cap with Grommet (There are 5 cables in the neck)
• Center Console Keypad Assembly
• Entertainment Headphone Jack and Mount
• (2) 5” Tie straps
• (2)M8 x 20mm Buttonhead Screws
• (1)M8 x 20mm Buttonhead screw (E-TRi only)
• (1)M8 Nut (E-TRi only)
• 60w Power Supply
• Power Cord, AS/NZS 3112 (NOT INCLUDED IN THE E-TRi KIT)
STAR TRAC P
ERSONAL
V
IEWINGSCREEN
(PVS)
8 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SMANUAL
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
9
• Power Cord, Nema 6-15 (NOT INCLUDED IN THE E-TRi KIT)
• Power Cord, Nema 5-15 (NOT INCLUDED IN THE E-TRi KIT)
• Owners Manual
PAL/SECAM Kit (Europe, Middle East)
NOTE: there are 4 different kits ie. E-TRi, E-TBTi/E-UBi, E-RBi, AND E-STi.
• PVS assembly with Mounting Bracket, Cables, and Display Cap with Grommet (There are 5 cables in the neck)
• Center Console Keypad Assembly
• Entertainment Headphone Jack and Mount
• (2) 5” Tie straps
• (2)M8 x 20mm Buttonhead Screws
• (1)M8 x 20mm Buttonhead screw (E-TRi only)
• (1)M8 Nut (E-TRi only)
• 60w Power Supply
• F-Type to PAL/SECAM Coaxial Adapter
• Power Cord, CEE 7/7 (NOT INCLUDED IN THE E-TRi KIT)
• Power Cord, Nema 6-15 (NOT INCLUDED IN THE E-TRi KIT)
• Power Cord, BS 1363 (NOT INCLUDED IN THE E-TRi KIT)
• Owners Manual
Required Tool for Installation
Supplied
• 5MM Hex Allen Key
Not Supplied
• #2 Phillips Screwdriver
• 1/2” Wrench (for E-TRi Kits only)
• Wire Cutters
• Step Stool
The Star Trac Personal Viewing Screen is different for each of your Star Trac E-Series Cardio prod­ucts. Make sure you have the proper kit for the E-Series product you are installing. The E-UBi, E-RBi, E-TBTi, and the E-STi will follow the same basic steps for installation. For the E-TRi turn page 18 in this section.
To install on the E-UB, E-RB, E-TBT, and the E-ST, follow these steps:
STEP 1
Using a #2 Phillips screwdriver, remove the (8) screws on the back of the display plastic. Set the screws aside, you will need them for reassembly.
S
TEP 2
After the screws have been removed, carefully open the display plastic, so as to not detach the inner cables from the display.
Disconnect the ground wire between the Heart Rate board and the display mount.
S
TEP 3
Disconnect the 12-pin serial connector and
the Heart Rate cable from the display.
1
2
3
10 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SMANUAL
I
NSTALLING
Y
OUR
P
ERSONAL
V
IEWINGSCREEN
(PVS)
1
2
3
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
11
After all the cable/harnessing has been disconnected, place the front display plastics aside for later use. Be careful with the display and place it face down on top of a non-scratching surface.
You can use the foam bag that ships inside the Personal Viewing Screen package to place the display face onto. This will help protect it from being damaged.
S
TEP 4
Remove the cap cover with the Star Trac logo from the plastics by removing the (2) screws using a #2 Phillips screwdriver. Retain the screws for later use. You will no longer need the cap cover and, if desired, you can store it away for any possible future use.
S
TEP 5
Remove the (2) M8 buttonhead screws retaining the crossbrace using the 5mm Hex Key found in the hardware kit. Retain the screws for later use. You will no longer need the crossbrace and, if desired, you can store it away for any possible future use.
S
TEP 6
It is now time to install the Personal Viewing Screen. Remove the PVS with its mounting brack­et and cables from the packaging. Also remove the (2) M8 buttonhead screws from the hardware kit in the packaging.
Screws
Screws
STEP 7
Install the (4) M8 Buttonhead Screws through the PVS mounting bracket into the display mount.
Note: (2) of the screws are in the PVS kit, (2) retained from step 5. Do not tighten them at this
time.
S
TEP 8
Adjust the cap with the grommet into place. Using the 5mm Hex Key, tighten the M8 Buttonhead Screws to 190 lb-in (21.5 N-m) of torque. Take the (2) Phillips head screws you removed from the original cap and snugly tighten screws down using a #2 Phillips screwdriver.
Check the back side of the display to see that the cap is seated properly. If not, loosen the two Phillips Head Screws, adjust the cap and then retighten the screws.
S
TEP 9
It is now time to make changes to the front display. Disconnect the center console ribbon cable from the back of the display PC board. Using a #2 Phillips screwdriver remove (4) screws that hold the center console to the main display. Retain screws for later use. Detach the center console from the display. You will no longer need this item and it can be stored away for any possible future use.
12 STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
M8 Buttonhead
Screws
Cap
(4) Screws
Ribbon Cable
STEP 10
Using a #2 Phillips head screwdriver, remove the screw that holds in the blank cover where the new Head Phone Jack mount will go. Next remove the blank cover. You will no longer need this item and it can be stored away for any possible future use.
Retain screw for later use.
S
TEP 11
Take the PVS center console from the kit.
S
TEP 12
Insert the new center console into the front display. Using a #2 Phillips screwdriver, screw in the (4) screws that were saved from the original center console. Tighten the screws so they are snug.
S
TEP 13
With the center console now installed, it is time to attach the interface cable and center console rib­bon. Take the seven pin interface cable from the center console and attach it to the display PC board. Next take the center console ribbon cable and attach it to the display PC board.
Make sure pin one on the cable is connected to pin one on the board.
STAR TRAC P
ERSONALVIEWINGSCREENOWNER’SGUIDE
13
Screw
Blank cover
SCREWS
Center Console Ribbon
Interface Cable
Loading...
+ 29 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use