![](/html/63/63c5/63c555673bc200239a5dfe902bbb1eca282ee4dcec08b16e68faa58da5ca8aa6/bg1.png)
LD5000
A: Pull knob to set desired tape length
B: Pull lever to dispense tape.
4270 Airborn Dr. Addison, TX 75001, USA
972.248.1999 | tech@startinternational.com
s t a r t i n t e r n a t i o n a l . c o m
Need more help? Download the full manual or contact us
Set Tape Length
Q9.4
5
Fill Water Tank
8
Adjust Water Level
OPTIONAL STEP
TDH2O1
Quick Start Guide
A
A: If necessary, water level can be adjusted
by turning the screw on the water tray
7
6
A
A: Fill water tank with clean water
B: To avoid spilling, place finger over fill hole
when returning full water tank to its holder
Clean Brushes
A: Remove brushes and wash with clean,
warm water.
B: Replace brushes. Brushes must be angled
toward the front of the dispenser.
A
®
![](/html/63/63c5/63c555673bc200239a5dfe902bbb1eca282ee4dcec08b16e68faa58da5ca8aa6/bg2.png)
TDH2O1
Manual
Gummed “Water Activated”
Tape Dispenser
42
1
Insert Tape
A: Insert tape roll and guide tape over the
black lift roller and the metal guide bar
Dispenser
A: Close lids and pull handle to dispense one
piece of tape. This will ensure that the tape is
loaded properly.
Adjust Guides
A: Open rear cover
B: Adjust reel guides to fit the tape roll
ITEMS INCLUDED
Check Tape
A
B
BACK
BACK
A
A
18
20
6
8
10
12
15cm
20cm
25cm
30cm
36cm
16
41cm
46cm
A: Raise front cover and continue feeding
tape under the upper tape plate
FRONT
3
Feed Tape