StarTech.com VS721MULTI User Manual

Page 1
Manual Revision: 11/05/2018
User Manual
For the latest information and specications visit
www.startech.com/VS721MULTI
Multiple Video Input with Audio to HDMI® Switcher
SKU#: VS721MULTI
Page 2
1
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Compliance Statements
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
For the State of California
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Page 3
2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Page 4
3
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Safety Statements
Safety Measures
• Wiring terminations should not be made with the product and/or electric lines under power.
• Product installation and/or mounting should be completed by a certied professional as per the local safety and building code guidelines.
• Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Mesures de sécurité
• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles électriques sont sous tension.
• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et dans le respect des normes locales et du code de construction local.
• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et acheminés de façon à éviter tout risque électrique, de chute ou de sécurité
安全対策
• 電源が入っている状態の製品または電線の終端処理を行わないでくださ い。
• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に 従い、有資格の専門業者が行うようにしてください。
• ケーブル(電源ケーブルと充電ケーブルを含む)は、適切な配置と引き回し を行い、電気障害やつまづきの危険性など、安全上のリスクを回避するよう にしてください。
Misure di sicurezza
• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche sotto tensione.
• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico professionale certicato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.
• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza.
Page 5
4
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Säkerhetsåtgärder
• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda.
• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt gällande lokala förordningar för säkerhet och byggnormer.
• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas.
Warning Statements
• Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage.
• Never use this product if parts are missing or damaged.
Page 6
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Table of Contents
Compliance Statements ........................................................................1
Safety Statements ..................................................................................3
Warning Statements ..............................................................................4
Product Diagram (VS721MULTI) ..........................................................6
Product Information ..............................................................................7
Packaging Contents .................................................................................................................................7
System Requirements ..............................................................................................................................7
Hardware Installation ............................................................................8
Hardware Operation ..............................................................................8
Specications .......................................................................................... 11
Page 7
6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Diagram (VS721MULTI)
Port LEDs
(6)
IR Receiver
Input Selection
Buttons (6)
Power
Supply
RS232
Port
HDMI
Ports
(3)
HDMI
Output
Port
VGA Port
Component
Ports
Composite
Port
S Video
Port
Audio
Input
Ports
(7)
Page 8
7
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Product Information
Packaging Contents
Multiple Format to HDMI® Audio Video Switch x 1
IR Remote Control x 1
Mounting Kit x 1
RS232 Serial Cable - 6 ft x 1
RS-232 Control Software CD x 1
Universal Power Adapter (NA/UK/EU) x 1
User Manual x 1
System Requirements
For the latest requirements, please visit www.startech.com/
VS721MULTI.
Video source devices (i.e. computer, Blu-ray Player)
HDMI® enabled display device (i.e. television, projector)
Desired Audio Video Input Cables
HDMI® x 3
VGA x 1,
Component YPbPr x 1
Composite CVBS x 1
S-Video x 1
3.5MM Audio VGA x 1
RCA Audio x 3
HDMI® Output Cable
Page 9
8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Hardware Installation
1. Connect the Desired Audio Video Input Cables (sold
separately) from each video source device (i.e. computer, Blu-ray Player) to the Video Input Ports (3 x HDMI®, 1 x VGA, 1x Component YPbPr, 1 x Composite CVBS, 1 x S-Video) on the Switcher.
2. Connect an HDMI® cable (sold separately) from the HDMI®
enabled display device (i.e. television, projector) to the HDMI® Output Port on the Switcher.
3. Turn on the display device, followed by the video source
devices.
4. (Optional) For RS232 Remote Serial control, connect the
included RS232 Serial Cable from a computer to the RS232 Serial port on the Switcher.
Hardware Operation
1. Manual Port Selection
Press the Input Selection Button that corresponds with the
video source device you would like displayed.
The selected Active Port LED Indicator will light, and the
desired video source device will be displayed on the HDMI® enabled display device.
2. Remote Control Port Selection
Press the desired 1 - 7 key on the remote control that
corresponds with the number above the Active Port LED Indicator.
Page 10
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
The selected Active Port LED Indicator will light, and the
desired video source device will be displayed on the HDMI® enabled display device.
Use the button to power on/o the VS721MULTI.
Note: The arrow buttons on the remote can also be used to switch the Active Port LED Indicator to the adjacent left or right video source device.
3. Remote Serial Control Using The Matrix Application Software
Note: Ensure Step 4. of Hardware Installation has been completed.
Download the latest software from the StarTech.com
website (recommended), or insert the included Software CD into your CD-ROM drive.
Launch AV Matrix(.msi). This le will be located in the root
directory on the downloaded folder, or the Software CD.
The Matrix Application software will quickly install. Upon
completion Click to open the software.
Click the “options” button and congure the
communication protocol to the following specications: Baud rate 9600bps, no odd or even calibration bit address, 8bit transmission address, 1bit stop address, PC Port 001.
Note: The COM port on your computer will require the same conguration. Consult your computer user documentation for further details.
Page 11
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Click the “Scan” button. The numbers near the bottom
of the table will now represent and correspond with the numbers above each Active Port LED Indicator, and the number 001 on the left side of the table will represent the HDMI® display Device.
Click the icon that corresponds with the desired video
source device, and that device will now be displayed on the HDMI® equipped display.
Page 12
11
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Specications
Ports 7
AV Input
HDMI
S-Video
Composite
VGA
Component YCbCr
Output Signal HDMI
Industry Standards High Speed HDMI®, HDCP
LED Indicators
1x HDMI - 1
1x HDMI - 2
1x HDMI - 3
1x VGA - 4
1x YPbPr - 5
1x CVSB - 6
1x S-VIDEO - 7
Max Resolution 1920 x 1200
Maximum Analog
Resolutions
VGA: 1920x1200
YPbPr: 1920x1080
Page 13
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Maximum Digital
Resolutions
1600x1200
Supported Resolutions
Support VGA mode
640x480, 720x400, 800x600, 848x480, 1024x768, 1152x864, 1280x720, 1280x768, 1280x800, 1280x960, 1280x1024, 1360x768, 1400x1050, 1440x900, 1440x1050, 1600x1200, 1680x1050, 1920x1080, 1920x1200
Support YPbPR mode
720x480, 720x576, 720x480, 720x576, 1280x720, 1920x1080, 1920x1080
Page 14
13
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall it be the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
13
Page 15
Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Reviews
Share your experiences using StarTech.com products, including product applications and setup, what you love about the products, and areas for improvement.
StarTech.com Ltd.
45 Artisans Cres.
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
2500 Creekside Pkwy.
Lockbourne, Ohio
43137
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle
15 Gowerton Rd., Brackmills
Northampton
NN4 7BW
United Kingdom
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Loading...