Page 1
Installation Manual
VGA2NTSC
Video Converter
VGA to NTSC/PAL TV Video Converter
Page 2
1
Overview
Feeling limited by the built in monitor that came with your computer? Want to be able
to see what you're typing without squinting at it? StarTech.com has new VGA to NSTC
TV converters perfect for multimedia presentations, public broadcast systems, and PC
gaming.
Features
• Plug and Play - Just plug it in and go!
• No power adapter needed - Utilizes the PC USB port to obtain power for operation
• Supports resolutions up to 1024 x 768
• Picture position, zoom, freeze, and filter controls on the top of the unit provide
superior display adjustment.
• Supports NTSC (North America) video format
• Provides output in both composite and S-Video formats
• Provides audio connection from PC to TV
• All required cables are built into the unit
Specifications
Getting Started
This section is designed to help you prepare the VGA2NTSC for installation. Please read
through this section carefully before attempting to install the video converter.
Unpacking the VGANTSC
This package should contain:
1 x Video Converter
System Requirements
• VGA or SVGA video connection
• Active USB port
Input
Output
Frequency
Power
Standard VGA, RGB
VGA to Composite and S-Video
640 x 480 @ 85Hz, 800 x 600 @ 80Hz,
1024 x 768 @ 60Hz, NTSC and PAL supported
USB 5vDC @ 300ma
Dimention (L x W x H)
Weight
Connectors from PC
to TV
115 x 60 x 18 mm
231g
HDDB15 Male, USB A Male, Stereo Audio Male
Left and Right Audio RCA Male, Composite
Video RCA Male, S-Video Male
Page 3
2
1. USB connection for power
2. Audio from the PC
3. VGA Video from the PC
4. TV Video output (S-Video + RCA Composite)
5. TV Audio output (left and right audio RCA)
Connection
To TV
4
5
3
To PC
2
1
Page 4
3
Function Keys
1. UP - move TV screen image up
2. DOWN - move TV screen image down
3. RIGHT - move TV screen image right
4. LEFT - move TV screen image left
5. FREEZE - push and hold freeze button to freeze on-screen TV image (does not affect
the PC)
6. RESET - restore TV image to default setup
7. FILTER - adjust TV resolution
8. ZOOM - Enlarge TV screen image to 4 times
9. NTSC and PAL selector switch
Remote Detection
Q: There is no PC information on the TV.
A: Confirm VGA (15-pin), USB, composite/S video are connected and that the TV is
on the correct channel.
Q: There is no audio coming from the TV.
A: Confirm that the audio cable is connected.
Revised: November 30, 2001
Loading...