StarTech.com USBthere USB201EXT, USBthere USB204EXT User Manual

USBTHERE
User Guide
USB201EXT
USB204EXT
USB204EXT shown
Featuring ExtremeUSB® Technology
USBthere USB201EXT/USB204EXT
The USBthere has been tested and found compliant with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when installed and operated in a commercial environment. The USBthere generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user guide, may cause harmful interference to radio communications. Operation of the USBthere in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CE Statement
We, StarTech.com, declare under our sole responsibility that the USBthere, to which this declaration relates, is in conformity with European Standard EN 55022/A1 Class A, and EN 50082-1 (IEC 801-2, IEC 801-3, IEC 801-4)
IC Statement
This Class A digital apparatus complies with Canadian ICES-003.
User Guide
i
Contents
Introduction................................................................................................ 1
USBthere Product Contents ....................................................................... 1
About the USBthere................................................................................... 2
Before You Begin ...................................................................................... 6
Installing the Local Unit ............................................................................ 6
Installing the Remote Unit ......................................................................... 6
Connecting the Local Unit to the Remote Unit.......................................... 7
Checking the Installation............................................................................ 7
Connecting a USB Device ......................................................................... 8
Troubleshooting ......................................................................................... 9
Specifications........................................................................................... 12
Technical Support .................................................................................... 13
Warranty Information .............................................................................. 13
USBthere USB201EXT/USB204EXT
ii
Notes
User Guide
1
Introduction
This manual is intended to assist IT professionals install the USBthere models USB201EXT and USB204EXT. The instructions in this guide assume a general knowledge of computer installation procedures, familiarity with cabling requirements, and some understanding of USB devices.
NOTE: Notes give additional information that could make installation
easier.
USBthere Product Contents
When you open your USBthere for the first time you should find the following items:
USBthere User Guide
Local Unit
Remote Unit
AC power adapter (optional)
USB cable (2m long)
To complete the installation, you will also require the following items that are not included with the product:
USB compatible computer
USB device
Category 5 Unshielded Twisted Pair (UTP) cable with two RJ45
connectors (if using surface cabling), OR, Category 5 UTP cabling with two information outlets and two Category 5 UTP patch cords with RJ45 connectors (if using premise cabling)
NOTE: The maximum length of the Category 5 UTP cable, including patch
cords, must not exceed 100m.
USBthere USB201EXT/USB204EXT
2
About the USBthere
The USBthere incorporates ExtremeUSB® technology. This technology breaks the five-meter distance barrier for the connection of USB peripheral devices and allows users to enjoy the benefits of USB technology beyond the desktop. With the USBthere, USB devices can be located up to 100 meters from the host computer. In addition, the USBthere USB201EXT and USB204EXT can supply power to remote low-power or high-power USB devices.
The USBthere is composed of two individual units, the Local Unit and the Remote Unit.
The Local Unit
The Local Unit connects to the host computer using a conventional USB cable. Depending on your needs, it also connects to a power outlet through an AC power adapter.
Front View
1
2
3
4
5
6
1
Host LED
2
Host Port (USB Type B)
3 Link LED
4
Link Port (RJ45)
5
Power LED
6 Power connector
NOTE: The power adapter for the USBthere USB201EXT can be
connected to either the Local Unit or to the Remote Unit, as convenient. With the USBthere USB204EXT, the location of the power adapter also depends on whether you are connecting high­power or low-power USB devices. (See Power Handling on page
4).
Loading...
+ 14 hidden pages