StarTech.com USB867WAC22 User Manual
USB 3.0 to AC1200 Dual Band Wireless-AC
Adapter
USB867WAC22
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
For the most up-to-date information, please visit: www.startech.com
Manual Revision: 07/08/2014
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body.
Instruction Manual
Déclaration d’exposition à la radiation:
Cet équipement respecte les limites d’exposition aux rayonnements IC dénies pour un
environnement non contrôlé. Cet équipement doit être installé et mis en marche à une
distance minimale de 20 cm qui sépare l’élément rayonnant de votre corps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à
leur proximité.
FCC ID: VYTLP-8097
IC: 11232A-USB867WAC22
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.
Instruction Manual
ii
Table of Contents
Introduction ............................................................................................1
Packaging Contents ................................................................................................................................. 1
System Requirements .............................................................................................................................. 1
Product Overview ..................................................................................1
Installation ..............................................................................................2
Windows ....................................................................................................................................................... 2
Mac OS .......................................................................................................................................................... 3
Verifying Installation .............................................................................3
Windows ....................................................................................................................................................... 3
Mac OS .......................................................................................................................................................... 4
Operation ................................................................................................4
Windows ...................................................................................................................................................... 4
Specications ..........................................................................................22
Technical Support ..................................................................................23
Warranty Information ............................................................................23
Instruction Manual
iii
Introduction
Packaging Contents
• 1 x USB Wireless Adapter
• 1 x Driver CD
• 1 x Instruction Manual
System Requirements
• Available USB port
Product Overview
Link/Activity LED WPS Button USB 3.0
LED Indicator
O – No power to adapter
On / Blinking – Link established / Activity
Instruction Manual
1
Installation
Windows
Note: The USB867WAC22 is plug-and-play supported in Windows 8/8.1 and does not
require installation from the CD.
1. Insert the provided CD into your DVD/CD-ROM drive.
2. Select Autorun.exe from the Autoplay menu. If Autoplay is disabled on your system,
browse to your CD/DVD drive and run the application.
3. Select the Driver Installation option.
4. Follow the on-screen instructions to complete the installation.
NOTE: You may be prompted to restart once the install completes.
5. Connect the device to an available USB port.
Instruction Manual
2
Mac OS
1. Insert the provided CD into your DVD/CD-ROM drive.
2. Browse to the appropriate Mac OS version folder on the disc and run the Installer.
pkg application to start the install.
3. Follow the on-screen instructions to complete the installation.
NOTE: You may be prompted to restart once the install completes.
4. Connect the device to an available USB port.
Verifying Installation
Windows
1. Open the Device Manager by right-clicking on Computer, and then select Manage.
In the new Computer Management window, select Device Manager from the left
window panel (For Windows 8, open the Control Panel and select Device Manager).
2. Expand the “Network adapters” section. On a successful install, you should see the
following device in the list with no exclamation points or question marks.
Instruction Manual
3
Mac OS
1. Open the System Report by clicking the Apple symbol in the top left corner,
selecting About this Mac, then select System Report
2. Expand the “Hardware” section and click “USB” in the left column. With the adapter
connected, you should see the following device in the list.
Operation
Windows
Connecting to a wireless network is done through either the Windows wireless
conguration utilities, or through the Realtek utility. You must know the name of
the wireless network (SSID), the type of security it is using (if any) and its associated
password to connect to a wireless network. Consult the documentation for your
wireless access point (AP) or contact your network administrator for details.
Depending on your version of Windows, you can display the list of available networks
using one of the following methods:
Instruction Manual
4
Windows 8
Move the cursor to the upper right corner to open the Charms
Bar, select Settings and then select Wi
Windows 7 Click the network adapter tray icon
Windows Vista Click Start, then Connect To
Windows XP
Right-click the wireless adapter tray icon and select View
Available Wireless Networks
Realtek Utility
Tray Icon
The tray icon will display one of the following three statuses:
Utility running, but no
WLAN adapter detected
WLAN adapter detected,
not connected to a wireless
network
WLAN adapter detected
and connected to a
Client Mode
Click on the tray icon to open the conguration window.
Some basic device controls are shown at the bottom of the interface:
Show Tray Icon – Show / Hide the tray icon.
Radio O – Disable the wireless radio.
Disable Adapter – Disable the device.
Virtual WiFi allowed – Enable Virtual WiFi (soft AP).
network
Instruction Manual
5
Loading...